I cant get my Nano to come on

I cant get my Nano to wake up

Have you tried a hard reset? See this article for instructions on how to reset your iPod.
http://support.apple.com/kb/ht1320
Otherwise, try letting it charge for an extended period of time and then attempting to reset it again.
If nothing else, it's likely a hardware issue, possibly a dead battery, meaning you'll need to have it serviced. I would recommend making a trip to your local Apple store/Genius Bar to see if there is anything they can do for you.
B-rock

Similar Messages

I CANT GET MY NANO OUT OF DISK MODE!!!!

i accidentaly put my ipod into disk mode and now i cant get it out. I tried turning it off but it doesnt do anything
no clue Windows XP
no clue Windows XP

I am having the same problem - IPOD Nano gets stuck in Disk Mode. It won't respond to Reset, just stays locked up. The restore works, but this is the third restore I had to do this week. Am I doing something wrong, or is the IPOD defective?
Or is this a bug with the IPOD Nano software, as I see there are a lot of these posts, but reset seems to help many.

TS3274 i CANT GET MY VOLUME TO COME ON

I can't get my volume to work

Is it no sound, or no volume? If the former see here, and in particular the latter part. http://support.apple.com/kb/HT4085

Cant get call phone to come on my page even though...

i click call phones and no dial pad enters nor my friends/contacts HELP [edited for privacy]

If you have followed the instructions in the support document, then there is likely a hardware problem with the phone. You can make an appointment at the Apple Store to have the device checked if you like. There is no cost for that, however if the device is defective, since it is out of warranty, you can either take it as it is and see about a 3rd party repair, or you can get an OOW replacement from Apple. The cost for a 3G is $149 in the US. If not in the US, you can check at this website, http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne change your location and see what the price is for you.

I cant get my nano generation 7 ipod to shut off

I cant my nano generation 7 ipod to shut off; i have tried to reset it, waited 5minutes to try to shut it off, pretty much everything. please help.

When you press the sleep button at the top it doesn't go off?

Cant get ipod nano off disk mode (using anapod on windows me)

please help me! my ipod keeps flashing the apple logo but i cannot fix it.

try reseting it, hold the middle and menu buttons down for 6 to 10 sec.
iPods- 4gb Balck Nano, 60gb Black 5g}{Black Moto Razr}{PSP}{iPod Radio Remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/sm.jpg"align="right

I open firefox and i cant get any page to come up, my explorer works but i dont want to use that

when i open ffox it doesnt even come to hm page, i cant navigate. it shows this
Unable to connect
Firefox can't establish a connection to the server at en-us.start3.mozilla.com.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
i have checked my firewall and stuff like that there are no restrictions on firefox on my computer

Opening in the side bar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the side bar" is not selected.<br />

I plugged in my ipad and screen is black.it just makes a bell sound and doent turn on.tried to connect it to itunes and it says the passcode is on,but i cant get the screen to come up to do anything

need help getting the screen to turn on

Darlene170 wrote:
I am having this same issue. I tried resetting the device, since the screen is black there is no apple.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...

Hello I Have a problem that i cant solve i have itunes 10.2 went to 10.5 but i cant get anything to work comes up with (could not access network location ).I have checked my firewall settings tweaked as much as i can but not able to install itunes nor qui

Hello Im Having A Problem With Itunes im Not Able to reinstall itunes at all nor quicktime and bonjour service is not working either .i have tried tweaking my firewall but to no avail hoping someone can help me cos apple sure cant typical like politicians they sway away from the problem and blame someone else ?.

Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App

Cant get my iPhone to come online that was taken.

Is their a way to turn your Iphone on from another device so that it will be able to be tracked by the find my ophone?

No.

TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

Hello there, LaruaGalliers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My ipod has come up disabled and i cant get it to work for me

my ipod has come up disabled and there is no time lenght on it and cant get it to connect to my itunes for it to work

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

How come i cant get itunes to open on my galaxy tab 2?

I've dowloaded itunes 2 gimes and it says it cant open it. I have a galaxy tab 2 i,m trying to install it on. How come i cant get it? Also i need to have someone walk me through the
how to get a subscribe button. Is there anyone i can call to talk to about this?

Confirming and expanding on what RG said, not only is iTunes is not available for Android devices, it cannot sync to an Android device if you have iTunes running on a Windows or Mac system. You'll need to use the download stores provided for Android devices, and if you have music downloaded from the ITunes Store on a computer, whatever synchronization method Samsung provides for getting the music to your Galaxy.
Regards.

Cant get com.apple.security.files.user-selected.read-only entitlement to work

Hey I am curious how can I get the .ipa compiled file for iOS to be able to read all the directories on the iPhone?
I made a file browser but I cant get to the pictures
I tried adding the entitlements in Flash Builder 4.6 in the descriptor file like this:
<key>com.apple.security.files.user-selected.read-only</key>
<true/>
<key>com.apple.security.assets.movies.read-only</key>
<true/>
<key>com.apple.security.assets.pictures.read-only</key>
<true/>
in the
<iPhone>
<Entitlements>
<![CDATA[
I got Push notifications working and accepted in the app store but it can't read the pictures directory when browsing for a file
I know the app id and stuff is set up right or I wouldnt have been able to get it accepted in the app store. In the entitlements area of course I have the application identifier set and aps-environment and keychain access groups and whatnot set up right.
When I try to put the app onto the iPhone with iTunes it just says 'Entitlements are not valid' (does not mention anything about mismatched ids) I can't find anything about how to add this entitlement and I could have sworn I saw a thing that said I can just use the descriptor file to add entitlements in some of the documentation I have it set to use air 3.4
Is there something I am doing wrong, how do I get apple to just put these entitlements in the mobileprovision file, I cant seem to edit it, if I do I also get an error in itunes that is some hex code...

Did you ever solve your problem?
I just transfered my web hosting and e-mail to bluehost. I had some of the same problems you are having. I noticed you have your incoming server set to bluehost.
Incoming mail server: (SSL) box610.bluehost.com (sever requires authentication which I already have done)
If bluehost is your server this is what worked for me:
Account Information
Account type— POP
Description—anything you want
Email Address—in your case would be [email protected]
Full name— first and last name
Incoming server—mail.magnus.com
User name—[email protected] Notice it is the @ symbol not a +
password— your password . Remember they are case sensitive
Outgoing Mail server—select edit smpt server list from the drop down window
select the + to add a server
Account Information
Description—may be left blank
Server name—mail.magnus.com
TSL Certificate—None
Advanced
Use default ports
Check Use SSL
Authenticate—password
Username—[email protected]
passowrd—your password
Click ok
In the accounts window
Outgoing SMTP— select the server you just created.
Check—use only this server
Select the Advance tab next to the Mailbox Behaviors
Check use SSL— it will be port 995
Authenticate —use password
Ann

I cant get my Nano to come on

Similar Messages

Maybe you are looking for