I cant get my PhotoshopCS6 to download.  Akamai install asst does not download either.  What to do?

I just purchased this software, but can't get it to download.  As prompted I've tried to first download the two Akamai installer assists, but although they
seem to download for a couple seconds they fail.  Then, I get no new instructional banner to move forward from.  What should I do?

I just went through this same process.... I changed my credit card, double checked billing info, changed my password, I restored my phone, but the misake I made was I kept restoring it from my back up.... Finally I went to Apple Store.. and sad to say that you have to do a restore, and DO NOT restore from back up.
I used Gmail so I didnt loose contacts or email.. but I did loose all my text messages and history of that.
So, I had the EXACT same problem and it was a software issue.. you have to restore your phone to factory settings and start all over.. BLOWS I know!

Similar Messages

  • Cant get Adobe Air to download

    I have windows 7 and I cant get Adobe Air to download not even if I run it as administrator. I need Adobe air to run my Cricut.

    you successfully downloaded adobe air but are not able to install it?
    if yes, what file (name and extension) did you download and what is its file size?

  • I cant get i tunes to download on windows 7. Help

    Help cant get i tunes to download on a windows 7 pc. Please Help!

    Try This
    Go to apple.com>itunes>download imac+windows>the top of the next page offers selection for windows 7 32 bit or 64 bit . DON'T push  the downoad button
    Further down the page there is a list of software requirements including "itunes 64 bit installer" link.
    If you haven't tried this, do it. I think the process is self directing after that

  • HT4859 I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

    I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

    For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.

  • My niece dropped my iphone and now i cant get past my password screen because its unresponsive in a certain area, what do i do?

    My niece dropped my iphone and now i cant get past my password screen because its unresponsive in a certain area, what do i do?

    hand it in for repair?

  • I just bought a new iPad air and have not been able to download kindle app to read my books. When I type kindle on my iPad app page, kindle app does not appear. What do I do to get this app into my iPad air?

    I just bought a new iPad air and have not been able to download kindle app to read my books. When I type kindle on my iPad app page, kindle app does not appear. What do I do to get this app into my iPad air?

    Hi norlowski,
    Do you already have the Kindle app downloaded to an iPhone or another iPad? Do you have "Automatic Downloads" turned on under Settings>iTunes & App Store for Apps on your iPad?
    You might want to try touching and holding the Kindle App option in your Purchased list, and when it highlights, let go, and it will go to a a detail page for the app with another "Open" option on it. See if it will open from there.
    If you do have Automatic Downloads turned on on the iPad, turn it off, and then go back to purchased to see if the Kindle is still showing as "Open".
    Post back with results!
    Cheers,
    GB

  • I am thing of using Final Cut Pro but when I try and download I get the message "Your computer's video card does not meet the minimum system requirements." Can I do anything about this?

    I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.

    Geoff2T wrote:
    I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
    It is just as the message says. Your video card is not compatible.
    You can add a compatible graphics card and use FCP X with your mac.  I can't suggest which one, but maybe other people on this forum can guide.
    And you may also get good suggestions in the Mac Pro forum.

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT204053 I have made an Apple ID 10 months ago...But when I use it I get a message that says your Apple ID does not exist in iTunes and also Application Store...

    I am living in Iran...I have made an apple ID about 10 months ago to use free Apps available in ITunes and Application Store...But I always get a message which says your Apple ID does not exist in iTunes and Application Store...Please guide me how to use iTunes and Application Store for downloading free Apps and music...

    It sounds like you haven't yet setup iCloud with that account and you need to do that on a Mac or iOS device.  Once setup, you can enable iCloud on a PC, but it needs to be setup first.
    See Creating an iCloud account: Frequently Asked Questions
    Which says in part:
    You can sign up for iCloud on an iPhone, iPad, or iPod touch with iOS 5 or later, or through System Preferences on a Mac with OS X Lion v10.7.4 or later. Just follow the setup instructions for your iOS device or Mac.
    ivan

  • TS3354 I have an Nvidia GTX 580 and a Dell U2711, which has HDCP support.  Why do I get the message in itunes that my hardware does not support it?

    I have an Nvidia GTX 580 and a Dell U2711, which has HDCP support.  Why do I get the message in itunes that my hardware does not support it?
    I downloaded 1080p content, not sure why this would not work with the hardware I have.
    Bryan

    Updated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
    [ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
    NVRM: this kernel module has the version 304.60. Please
    NVRM: make sure that this kernel module and all NVIDIA driver
    NVRM: components have the same version.
    Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
    Output of pacman -Qs nvidia:
    local/conky-nvidia 1.9.0-2
    An advanced, highly configurable system monitor for X based on torsmo
    local/lib32-nvidia-utils 310.19-1
    NVIDIA drivers utilities and libraries. (32-bit)
    local/libvdpau-git-flashpatch 20120825-1
    Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
    local/libxnvctrl 304.51-1
    NVIDIA X Ctrl library
    local/nvidia 310.19-2
    NVIDIA drivers for linux.
    local/nvidia-utils 310.19-1
    NVIDIA drivers utilities and libraries.

  • I have creative cloud but Lightroom 5 develop does not work.  What do I need to do to get it working

    I have creative cloud but Lightroom 5 develop does not work.  What do I need to do to get it working?

    If lightroom downloaded and installed without any errors, you will get better help with program questions in the program forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/lightroom

  • Sending an email from my Ipad I get "receipient was rejected by server because it does not allow relaying". What does this mean and how do I correct it?

    When sending an email from my Ipad. I get "receipient was rejected by server because it does not allow relaying". What does this mean and how do I correct it?

    On the email account's settings (Settings > Mail, Contacts, Calendars and tapping on the account on the right), go into it's outgoing SMTP settings and try putting in your email name and password (they might currently show as 'optional')

  • Part of Photoshop isn't functioning.  Under adjustments, when HDR toning is clicked on I get a code:  Error 48: File or folder does not exist.  Line:11  - $.evalFile(g_StackScriptFolderPath   "StackSupport.jsx");  How can it be fixed?

    The phone company was here working on something while I was gone.  They sat down at my computer (iMac) and since then HDR toning doesn't work.  Get the code:   Error 48: File or folder does not exist.    Line: 11     ->  $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx");   How can this be fixed?   

    Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

  • I keep getting a popup error message in Ical "server does not recognize name/password

    I keep getting a popup error message in Ical "server does not recognize name/password"  This started after they did the change to Icloud and extended our subcriptions. 
    Tricia

    I guess that the server name is incorrect, then.
    Did it ever work?
    Delete the account, reboot the phone, then add it back and be sure you choose Yahoo as the mail server type. Everthing should then fill in automatically except your user name and password.

  • I am getting this error message "ORA-01006: bind variable does not exist.

    My code works fine like this:
    DECLARE
    v_JOBTYPE varchar2(8);
    v_STATUS varchar2(8);
    v_FAILURE varchar2(8);
    v_CAUSE varchar2(8);
    v_ACTION varchar2(8);
    BEGIN
    SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE
    INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE
    FROM R5EVENTS WHERE ROWID = :ROWID;
    IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_JOBTYPE , 'X') IN ('BRKD','UNPLBRKD','FILTRA', 'LUB', 'FAC') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
    RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
    END IF;
    END;
    But I want to change the code to include a record (ACT_TRADE) from another table(R5ACTIVITIES). I am getting this error message "ORA-01006: bind variable does not exist - POST-UPDATE 200Before Binding". Any help would be appreciated.
    DECLARE
    v_STATUS varchar2(8);
    v_FAILURE varchar2(8);
    v_CAUSE varchar2(8);
    v_ACTION varchar2(8);
    V_CODE varchar2(8);
    V_EVENT varchar2(8);
    V_TRADE varchar2(8);
    BEGIN
    SELECT R5EVENTS.EVT_STATUS, R5EVENTS.EVT_FAILURE, R5EVENTS.EVT_CAUSE, R5EVENTS.EVT_ACTION, R5EVENTS.EVT_CODE, R5ACTIVITIES.ACT_EVENT, R5ACTIVITIES.ACT_TRADE
    INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, V_CODE, V_EVENT, V_TRADE
    FROM R5EVENTS, R5ACTIVITIES WHERE V_CODE = :V_EVENT;
    IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_TRADE , 'X') IN ('MTM','MTL','MTMGT', 'FTM', 'FTL', 'FTMGT', 'R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
    RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
    END IF;
    END;

    Thank you for your responses. Your feedback was helpful. This is what I ended up doing for a solution:
    DECLARE
    v_JOBTYPE varchar2(8);
    v_STATUS varchar2(8);
    v_FAILURE varchar2(8);
    v_CAUSE varchar2(8);
    v_ACTION varchar2(8);
    v_GROUP varchar2(30);
    BEGIN
    SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE, USR_GROUP
    INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE, v_GROUP
    FROM R5EVENTS, R5USERS WHERE R5EVENTS.ROWID = :ROWID
    AND USR_CODE = O7SESS.CUR_USER;
    IF NVL(v_STATUS, 'X') = 'C' AND NVL(V_GROUP,'X') IN ('MTM','MTL','MTMGT','FTL','FTMGTS','PLANNER','DISPATCH','PMCOOR','R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
    RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
    END IF;
    END;

Maybe you are looking for