I cant get my wireless or any internet to work with AOL

I have a Motorola Modem and a Linksys router. I get my internet through Roadrunner but i access it through AOL, my Macbook says the Airport is connected to the internet but Safari wont allow me to open a webpage, it says the server stopped working. Additionally when i try to log on to AOL it Warns me that I need to log into my ISP first before AOL.
Please Help.

Once your RR modem has been setup properly, either computer should be able to connect directly through it to the internet. OK?
read carefully...
Then, putting the router in place, connecting ethernet from modem into WAN port on router. Reboot both of those devices. With me?
Now. plug mac via ethernet into router LAN port 1
Plug PC via ethernet into router port 2...OK?
Reboot mac and PC. (go ahead).
What happens now? anyone, or no one?
No one?...power down modem. power down router. wait. Power up router, then power up modem. Go into router's admin panel, and confirm that it's getting DHCP from Internet modem. Refresh, Renew.
Now then, what does all this have to do with AOL?
Why do you need AOL with RR high speed?
Chek AOL mail at aol.com (check mail, look for the mail link)
Leave the AOL software alone for now.

Similar Messages

Unable to connect mac OSX 10.4.11 to wireless network (virgin media) even though iPad, iPhone and laptop ok. Get message 'password incorrect' even though it works with other devices. Keep getting message connect to BT unrestricted access.

Keep getting 'do I want to connect to BT unrestricted network' which I have never used before. I can get my ISP details input but get message 'incorrect password' even though it works with 3 other devices. My network provider, Virgin Media, sent an engineer but he couldn't solve the problem - said network was all ok so problem must be with my iMac (OSX 10.4.11). When I try to use internet I get BTWiFi is current wireless network - I've never used this! I've tried to change this and virgin media details are accepted, it's just the password stage that prevents me from connecting. I am not very knowledgeable with computers so I really need a step by step guide to solve this problem. PLEASE HELP!!!

Excuse me barging in on the thread, but I have a lot of experience with Telus, and roaming with my BlackBerry (currently a Z10). In short, you've been fed some outdated info by the Telus rep. Telus has become very Android-centric, and it seems like a good number of Telus CSR's are still reading from a Legacy BlackBerry trouble-shooting guide.
My Z10 is unlocked, and I periodically use an AT&T sim when traveling in the US. I have never had to change an email setting to get full email function -- including the SMTP settings. To put it simply, your device first connects to a network using credentials provided. At most hotels, for instance, your device will scan for and pick up a WiFi network. The hotel will tell you the WiFi network name and give you a password to use. You simply enter the password when prompted, then you may have to agree to certain conditions. That's it.
Your email settings are just that. Using whichever network to which you are connected, the user name and password give you access. The settings coincide with the email provider's server settings. These don't typically change with the location from which you are connecting.
I'd suggest you take a look at this very helpful email settings tool provided by BlackBerry, if you are having difficulty: http://helpblog.blackberry.com/2013/03/email-account-validation-tool/
It helps you determine the possible settings for connecting to your email provider. Different providers offer different connection options, sometimes more than one. Opinions vary, but my preference in descending order is: ActiveSync, IMAP, then POP if required. ActiveSync (aka EAS) and IMAP will offer 2-way sync.
Take a look at the tool and pop a message back here if you have any questions. Good luck. ~ecm

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

I can not get the flash player plug in to work with Internet Explorer

I can not get the flash player plug in to work with Internet Explorer

Zoltan71 wrote:
I just bought this computer. My Internet Explorer is version 11.0.1
I have the box checked to Install new version automatically, but it has not done any upgrading.
I can't get the computer to update anything as far as I can see.
The flash plug in does work with the Crome browser but it will not work with Internet explorer.
I looked in the manage add-ons and it says enabled.
I also went into the safety tab and deselected
Active X filtering.
Restarted and still does not work.
I need help.....
Chrome uses a different and separate plug-in.
There are things about IE you need to know, especially 11. Specifically:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

I have a Creative D100 wireless speaker. How do I get my bluetooth on my Mac to work with the speaker. It doesn't appear to recognize the speaker.

I have a Creative D100 wireless speaker. How do I get my bluetooth on my Mac to work with the speaker. It doesn't appear to recognize the speaker.

Have you gotten in touch w/the speaker manufacturer? Their response?

HT201401 cant get my ringer or other sounds to work. Not on silent

Cant get my ringer or other sounds to work. I'm not on airplane mode, nor on silent. I have turned the phone off and tried a hard reset.

If you have tried restart and reset ( nothing "hard" about it, justa reset), then try a restore from backup, then try a restore as new.
If that fails, then you like have a hardware issue.
Make an appointment at the genius bar.

Is there any way to get an ipod running/ ipod nike to work with a first generation ipod touch or ipod classic?

Is there any way to get an ipod running/ ipod nike to work with a first generation ipod touch or ipod classic?

We are talking about that Nike device. We have a iPod Classic (software version 2.0.1) and an iPod touch (iOS 4.2.1, an earlier model....maybe 3 years ago). When we plug in into the classic it says "the accessory is not supported) and when we plug it into the touch it says "no receiver required," but neither will load the nike+ running app. I believe it said that our iPod was incompatible with this app. Is there something we need to do to make it compatible? Get an updated operating system or a different app? That has also happened with a few other apps. Thanks!

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

How can I get address book 4.1.2 to work with osx 10.6.7

How do I get address book 4.1.2 to work with osx 10.6.7

You probably can't, but you can start by posting your queston in the correct forums...the OS X Mail and Address Book forums, as this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question in any way.

What app can i get to have my dell v515w printer work with my iMac

what app can i get to have my dell v515w printer work with my iMac

Dell has some really great drivers -- for Windows and Linux. But none for any version of Mac OS X.
LinuxPrinting.org does not llist that as a printer supported by any of their drivers -- not even badly supported.

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro6,1
Processor Name:    Intel Core i7
Processor Speed:    2.8 GHz
Number of Processors:    1
Total Number of Cores:    2
L2 Cache (per Core):    256 KB
L3 Cache:    4 MB
Memory:    8 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    MBP61.0057.B0F
SMC Version (system):    1.57f18

You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

INTERNET NOT WORKING WITH PRINTER HP OFFICEJET PRO 8600

Hi,i have new printer HP OFFICEJET PRO 8600.if i connect printer to PC internet stops to work.I have mobilstick internet.Its working without printer.IF the printer is connected and i put mobilstick to PC its writeing the device cannot be recognized.The internet is working with old printer.
I have windows XP.thank you

It does sound like there is a compatibility problem. You might try posting on one of the computer boards to see if anyone has advice on a computer setting that might help solve the compatibility problem. Click Here
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Anyone been able to get the sap.ca.ui.FileUpload control working with a Gateway OData service?

Hi,
I have been trying to get the sap.ca.ui.FileUpload control working with an OData Gateway service, specifically /IWPGW/TASKPROCESSING which is the service used by both Fiori Approve Requests and the Unified Inbox.
I have looked at the sample application in the Explored at SAPUI5 Explored
I have managed to replicate that and get it to work, but as soon as I switch it from a JSONModel to an ODataModel I get javascript errors from within the setModel method of the control. I have redefined that method and corrected the errors, which enables me to get a bit further, but then I hit more errors, and other strange behaviour.
Either I am doing something completely wrong, or to me it appears as if this control is still extremely buggy and maybe either not designed to work with an ODataModel, or just hasn't been tested using an ODataModel. I'm hoping it is my mistake.
So has anybody out there successfully managed to use this control connecting it to a Gateway OData service? If so please share your experience.
Thanks,
Brad

Hi Pauline,
Same issue I had, I switched to using a sap.m.list and handling the press as follows:
attachmentsList.bindItems(workItemPath + "/Attachments", new sap.m.StandardListItem({
                           type: sap.m.ListType.Active,
                           title: "{FileName}",
                           description: "{CreatedByName}",
                           icon: "sap-icon://doc-attachment",
//                         counter: "{FileSize}",
                      info: {path : "CreatedAt", formatter: dateTimeFormatter},
                      tap: function(oEvent){
                            var oContext = oEvent.getSource().getBindingContext();
                            var media_src = oContext.getProperty().__metadata.media_src;
                            sap.m.URLHelper.redirect(media_src, true);
                    }), new sap.ui.model.Sorter("CreatedAt", true));
So sap.m.URLHelper.redirect(media_src, true); is what loads the attachment.
See the full function handler:
function(oEvent){
function(oEvent){
              var oContext = oEvent.getSource().getBindingContext();
              var media_src = oContext.getProperty().__metadata.media_src;
        sap.m.URLHelper.redirect(media_src, true);
This should be enough if you only want to list and display the attachments, then you don't really need the FileUploader control as that is more advanced and handles upload, display, change and deletion of files.
I only needed to upload and display files, so I used a list to display it and created a separate upload button using the sap.ui.unified.FileUploader control.
Hope that helps.
Cheers,
Brad

I cant get my wireless or any internet to work with AOL

Similar Messages

Maybe you are looking for