I cant get the screen brightness to stay at full bringhtness
how do I keep the brightness to stay at it's brightest setting. i t always goes back to the middle setting
Thanks for trying so hard to figure this out, biggroove. It sounds like you've done all you can. At this point, I recommend a factory reset. The instructions are here:
http://vz.to/1hDj6Eb
Please let us know how it goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport
Similar Messages
-
need help getting the screen to turn on
Darlene170 wrote:
I am having this same issue. I tried resetting the device, since the screen is black there is no apple.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps... -
W540 Cant adjust the screen brightness
I have a W540 with 3K Ips panel and Windows 7 Pro 64bit.
I recently installed a new hard drive and installed windows 7 pro 64 (previously on the other hard drive was Windows 8.1 Pro 64 bit ( there I could change the brightness ) )
My problem is that I can not change the brightness .
I've already tried:
-Reinstalled all NVIDIA driver
-Reinstalled all Intel graphic drivers new
-Reinstalld Intel and Nvidia drivers simultaneously
-Remove Lenovo Power managment
-Tried to install NVIDIA driver from the Lenovo and the Nvidia page
-Reinstalled Windows
Can someone help me?
Sorry for my bad englisch
Solved!
Go to Solution.Go to http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-w-series-laptops/thinkpad-w54...
Run the downloaded executable/installer.
Then when the installation files have been extracted, just uncheck the checkbox that asks you if you want to run the installer right now. We want to install the Intel driver manually, because the installer made by Lenovo doesn't overwrite the already installed Intel HD Graphics driver if it is newer than the one you are trying to install.
You will find the extracted setup files by default at: C:\DRIVERS\WIN\VIDEO\
The driver you need is located here: C:\DRIVERS\WIN\VIDEO\INTEL
Run setup.exe in the Intel folder to install the Intel HD Graphics driver manually. If it notifies you that you already have a newer driver installed, just continue the installation.
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx -
I cant get the letter A and number 1 to work on my ipod touch screen can you help me
i cant get the letter A and nimber 1 to work on my touch screen on my ipod to work.
Try the stand fixes, one at a time:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults/new iPod. -
Does the new U2 30G gets the new brighter screen and search feature
Does the new U2 30G gets the new brighter screen and search feature? If I buy it on-line from the Apple Store, will I always get the latest version or is there a chance I may get some old inventory? Please share your experience. Thanks.
IBM Think Centre
IBM Think Centrethunderbolt in MBPs do not seem to behave well with Dell ultrasharp series. http://en.community.dell.com/support-forums/peripherals/f/3529/p/19458525/201488 89.aspx
I have a U3011, and my MBP retina 15inch
(10.8.2) only sends YPbPr space to the display via miniDP to DP cable instead of RGB. If I change the settings to RGB, the color is all funny looking. For all professional purposes this is useless. Nobody from Apple or Dell is willing fix this.
U3011 only uses HDMI 1.3, so you won't get the full resolution. I also have used a mini-DP to dual-DVI adaptor. It gets RGB from MBP, the text is all garbled for anything above 1600x1000 .
I am at my wits end. -
I cannot get the screen to appear - can see if it's on or off. There are times when the screen is bright bright green and yellow then disappears. Can I reset it? if so how?
It will cost you approximately US$219.00 to US$299.00 depending on the model.
Apple will replace the entire iPad; they don't repair.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad -
How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend the scale is reset to 1 = 1.
Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG -
I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help
Could you capture your screen and post it. Have the layers panel open and any layers that are collapsed, expanded. We will need to see the entire screen, as some information in the tab is important as well.
-
How can i get the footer bar to stay, whilst page scrolls?
how can i get the footer bar to stay, whilst page scrolls?
at the moment, on my site, if the page is longer than the screen, it goes behind the footer,
but the foot bar moves up the page as yo scroll down to see the rest of the content.
any way of getting the footer to stay put, while body/page contant scrolls ?
thanksYou can use some css to do it...
#footer_id {
position:fixed;
bottom:0px;
<div id="footer_id">Your footer content</div>
The css above will lock your footer to the bottome of the browser window. As long as your footer <div> is last in your html, it will float over the top of everything on your page when the page is scrolled. If it's not last in the html, you'll need to add a z-index to get it on top of your other content in the stack. -
How do i get the menu bar to stay
how do i get the menu bar to stay down where i can see
it all the time - instead of hiding from me.
thx
debIf you're running Lion, press the escape (esc) key to exit full-screen mode. Otherwise, provide more details, including the Mac OS version and the application you're have trouble with. A screenshot would help.
-
The screen of my macbook air was pulled on too hard and now the screen won't stay up.
A friend of mine pulled on the screen and something popped out of place and when I took it to someone to get it fixed, he told me that there is a crack somewhere in it (I don't remember what the part was called) He told me that if the part gets worse that the screen won't stay up on its own. I need a replacement part, but I wanted to know the price range for the new part.
Make an appointment at an Apple store genius bar for a FREE examination. You will be advised as to your options and then be in a position to make an informed decision.
Ciao. -
I have just transferred elements 11 to a new windows 7 64 bit computer using the original purchased disc. Organiser is working fine and all my photos are there, but I cant get the Editor to open. It just says editor workspace is loading and then it eventually gives up.
Try opening directly from your desktop, by passing the welcome screen.
Go to Windows Explorer>C drive>Program Files (x86)>Adobe>Photoshop elements 11. Right click, then Send to>Desktop
Double click on the shortcut and see it will open. -
My 2009 iMac is making a very loud noise. It sounds like a rapid, pulsating electronic noise. It stops when the screen brightness is adjusted or when using certain apps. But it always returns and is getting louder. The unit was shut down for 4 months and the house temperature was set to 5C. It was powered up 2 weeks ago and ran fine for a while. Then in the last 5 or 6 days the problem started. 5 days ago I did watch a bike race for 3 or 4 hours from a quasi legal stream. I am not tech savvy. Just very confused as I've had a trouble free run so far. Ditto with my iphone5.
I would recommend taking it in immediately to your local Apple Store or AASP to be loooked at by an Apple Genius. I suspect you made a goof somewhere but diagnosing noises without seeing it is really difficult.
-
my ipod turned white on the screen. cant get normal screen back. tried to restore and update to 4.2 but it says it cant download and to check my computer settings. can anyone help?
Go here to find out what to do with the specific error you received.
http://support.apple.com/kb/TS3694
What was the wording of the message? -
Ican see my account on itunes but cant get the music that is in my music lib. how do i get it on my new device?
What do you mean 'cant get the music that is in my music lib' ?
If you mean that it's on your computer's iTunes library then connect your device to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via option-command-S on a Mac, control-S on a PC) and then use the Music tab on the right-hand side of the iTunes screen to select and sync your music to the device.
If it's an iOS device, then depending upon what country that you are in then you might also be able to redownload some/all of your past iTunes music purchases via the Purchased tab in the iTunes store app on it
Maybe you are looking for
-
How can I change the page size of a pdf so i can view it on my iphone more clearly?
How can I change the page size of a pdf so i can view it on my iphone more clearly?
-
Elem 4.0 in Windows 7 without problems ?
Is it possible tun run Photoshop Elem 4.0 in Windows 7 without problems ? Warnings about compability problems.
-
Seriously...Now I have to figure out why audio doesn't match video
Good grief, come on!! I shot the video with a brand new HD canon. I imported the video and it plays fine in the program manager (audio in synch). However, after exporting (h.264) audio is out of wack by a few frames. I refuse to shell out $40 for s
-
Only two of my four signatures will reflect as options my e-mail
I have four signatures set up as options on Mac Mail. However, when I write an e-mail only two of them are accessible to choose from. How do I access the other two? I'm running Lion 10.7.5 on a Mac Baook Pro.
-
Order qty field in bapi and exit
Hi All, Pls resolve my issue...... I am creating the sales order through 'VA01' t-code.Now based on some conditions I will create a new sales order through BAPI_SALESDOCU_CREATEFROMDATA1 in t-code. I could not found the order quantity field in tables