I Cant get the set up screen off
On the set up screen i clicked on regiester later by accident, couldn't get it to come back on so regiestered through the website instead.
but now when i connect my shuffle, on itunes the set up screen still keeps coming on. The only button on there is contiune, which takes it off. But it comes on EVERY time i connect my ipod.
How do i get it off??
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
1. You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
2. Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
3. If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
4. If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.
Similar Messages
-
I changed a few settings on my iPad and now cant get the iPad to shut off with the shutoff button and the button to get to all the icons won't let me get back to settings to change the settings back. Can anyone help?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
hi i have an iphone 4s and i am having trouble deletine the old owners information off it, it keeps coming up [email protected] is the id that the phone is linked to and wont accept mine, i cant get incontact with the previous owner, i would like to just delete everytthign off it and have a blank iphone
Most likely synced automatically when you plugged it into your laptop.
-
My newly updated iPad 2 wants an email for the apple ID. My apple ID is not an email address. How can I get past the set-up screen?
I can't change my Apple ID. It would mess all my stuff up.To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I cant get the letter A and number 1 to work on my ipod touch screen can you help me
i cant get the letter A and nimber 1 to work on my touch screen on my ipod to work.
Try the stand fixes, one at a time:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults/new iPod. -
After restoring my ipad from itunes, I can't get past the set up screen
How do I get past the set up screen after restoring a new iPad 2 from an iTunes backup. I'd like to sync my apps on my iTunes to my iPad.
What setup screen? I have restored from a backup several times and the iPad always syncs when the process is complete. What are you seeing on the setup screen?
-
I live in an Arab country but do not read Arabic. The set up screens for an iStore account are presented in Arabic. How do I get English set up screens?
Set your language in Settings > General > International > Language
-
I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.
Two different things
If you forgot the password
If you forgot your Apple ID password - Apple Support
If the email ID you want to use is in use by someone else - then you may need a new one
The iCloud ID's are usually unique and may be of help if you set one up -
I am trying to change my email settings but everytime I click on mail in the set up screen I get bounced back to the home screen. Any ideas?
Call Apple to help reset your Security Question.
http://support.apple.com/kb/HT5699 -
I just want to use the phone as a web browser using wireless, I don't have verizon, I can't get past the set-up screen. Can I use the phone without a verizon account?
I took it to Verizon and a counter person got it to work. she said one has to be persistent and eventually the screen goes away that was demanding the phone number I didn't have, it works now I'm happy
-
icant get the sofware installation screen to come up. so i cant download adobe flash player
Hello Matthew.
Hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
For additional support, please contact Adobe. -
Hi I am currently have a subscription to PS CC but I don't think I have the latest version. I believe this because I don't get the new welcome screen and don't have new features like the structure and color setting in the content aware patch tool. I have checked for updates and it tells me I have the current version. I check in PS I have version 14.2.1. I also have CS6 installed on my PC, could this be somehow be doing something or am I doing something wrong. Would anyone have any suggestions.
It's under "Find New Apps". You have to scroll down to see it.
-
I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?
Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
I just got a MacBook Pro computer. When I turn it on, it opens up into email. How can I shut that off so I just get the blank home screen?
Before shutting off the computer, click Mail in the menubar and select Quit Mail
from the dropdown. -
how do you get the voice to turn off when you turn on your iphone it tells you everything from "slide to unlock, messages, etc..."
tripple click the home button and then turn voice over off... you can also access this from setting>general>accessibility right under vision
Maybe you are looking for
-
File association with m2v gone
I saw earlier posts about trying to view/use m2v and Finder window closing and DVD Studio unable to use the files. I had the same closing file problem with Finder and m2v files after upgrading to 5.04. I was able to change ONE m2v file to Quicktime b
-
My 3GS unlocked ATT iphone wont active-help!
Greetings, our family has been ont he ATT Family plan for years. Ive got the new iPhone5, wife has 4S and mom has 3GS. My OLD iphone 3GS, which was unlocked via ATT was given to my little girl to play apps and music on and was working great until a w
-
Issue with Report to Report Interface
Hi, I had interfaced Query 1 and Query 2.Query has char like Calmonth, Plant and Plant Platform in the mentioned sequence.When I click on Calmonth-> goto>Query 2 ,it is displaying all the details for that month.Its fine upto here.But when I click o
-
Shutdown of Lenovo X201 in battery mode
Hi everybody, With a new battery on my X201 Lenovo the tablet shutdown after few minute. The same it did with the older battery. But it work perfectly when the tablet is pluged on the AC network. So I can use it only at home. Thinks for your support.
-
Hi I have a WCS that has been upgraded to Version 7.0.164.0 and a Location Appliance that is running 6.0.102.0 The RFID tracking is no longer working. I can't see that WCS 7.0.164.0 supports the 6.0.102.0 on the Location Appliance and think I need to