I cant get the sound to work on my iphone 4 after i record a movie

after i record a short video i am unable to get the sound to work. what am i doing wrong?

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data, but a reset can cure some glitches.
If this does not work, try to set it up as new device, explained in this article:
How to back up your data and set up as a new device
Don't use the backup afterwards, to rule out a software problem. If the camera is working again, restore from the backup.

Similar Messages

Cant get my sound to work :(

I recently had to format my computer because of a virus that wouldnt let me log into windows. I was running win xp pro upgrade and it was running fine. Now i run win 98se becuase it wont let me upgrade for some wierd reason. but i cant get my sound to work. i try to install the drivers but i get a screen after the install wizard to put win98se cd in, select drive and press ok. well i clicked just about every option there was. and it would either flash back to the my documents on the selection screen or ask me if i want to cancell the installation, i have no idea what to do. I dont even know if it is recognizing that i even am using my integrated sound card. i would go and get another sound card but i dont have any money right now. anyone else have this problem or can help with with this problem??? ;(
i have the k7n2g mobo with a 1800 xp athlon

Hi,
You can tell whether the system has found your soundcard hardware by looking in "Device Manager" have you yellow question marks that show hardware (but no drivers)? My apologies if you've done this.
If I remember correctly (but don't quote me) when Windows98 asks for your 98SE disc it's looking for a file within one of the .CAB files on the 98SE (Correct me If I'm wrong) disc. If not, exactly which file is it looking for? - the requester should give you a clue. When you know what the file is, do a search on your 98 CD to see if you can find it. Then point the drivers install to that location (the directory where the .CAB OR relevant file resides.)
You say that after failing to find the file on the 98 CD that it reverts to "My Documents" this would suggest that you'd previously installed drivers (or other Win98SE software) from that location. For some reason Win 98 assumes (for some stupid reason) that it'll find any future files it needs at the same location as previously installed files.
Try installing the drivers for your sound using "Device Manager" click on the yellow question mark next to your hardware (if they are available) and Windows should open the "There is a problem with this device" (or words to that effect) requester and follow the instructions (wizard) from there.
I'm going to nip off now as I have 98 SE on a different partition (I very rarely use it). I'll have a look and get back to you later.
Good luck! :D
Axel :D

Compaq Presario R3000 how to get the sound to work with Windows 7 RC

1) Download SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe
2) Run it, Create a directory c:\ swsetup
3) Once all the Files are extracted DO NOT INSTALL
4) Now Goto the Start Menu Click on Devices and Printers, the Click on the Name you have called your machine this will be marked will a yellow triangle as the sound driver windows 7 has install already is a realtek ac 97 which is not working,
5) Once your Machinename you will see a general tab and and hardware tab select the hardware tab.
6) Look for the Realtek ac 97 under the Device functions, select that and click properties,
7) Now tab to the Driver, now click update driver,
8) Select the option let me pick from a list of devices drivers, now click have disk
9) Click on Browse select the following location Swsetup\SP29586\SMAXWDM\W2K_XP and click on smwdmCH6.inf
10)Now the Soundmax Driver should come up select ok and next. Now your Sound will work
This question was solved.
View Solution.

I am basicaly having the same problem with my labtop. I tried the following above and yet I still have not been able to get my sound to work. I have had some problems with my power and sound cards before but after I reinstalled windows my graphics card and sound card have not been working to their full potential. I thaught that it was a 64 bit graphics card, but now I am not so sure. I had to jostle the power cord in the back till I mannaged to find a perfect spot to keep the computer running. Before the reinstallation I had to put pressure on the left side of the computer to get the sound to work.. but even then it still came in and out.. "The sound that is." I can see the same driver in the codex menue and it is yellow but, what you stated above did not work.
It says (Cannot continue the hardware update) The wizard cannot find a better match for your hardware than the software that you curently have installed. and then tells me to keep the current software. My sound Icon does not show up when I go to the settings.... I can't play diablo 2 on this no idea why... But my screen is choppy when I scroll through internet sites and it did not do that before. I have a 400mbs connection .... here is my computer information. :Compaq Presario R3000 Intel pent4 2.80ghz 2.80ghz 1.12GB ram and im running on windows xp2 professional.

I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

Could you capture your screen and post it. Have the layers panel open and any layers that are collapsed, expanded. We will need to see the entire screen, as some information in the tab is important as well.

How do I get the sound to work?

I can't get the sound to work on my Mac, even after going into System Preferences. It is brand new so this is very disappointing. Can anyone help?

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I can't get the sound to work

I just got the
HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work. I am using it with a HP Envy 23 inch monitor that also has Beats audio and an HDMI cord hookup. I have gone through all the steps on the monitor support page and the desktops support page. Any help out there? Thanks in advance.
This question was solved.
View Solution.

Hi,
No, this is not going to work, you can't hook the desktop to the AiO 23 and get sound from the AiO 23.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I can't get any sound to work on my iPhone 4S unless I have the headphones plugged up. Help...

i can't get any sound to work on my iphone 4s unless the headphones are plugged up

http://support.apple.com/kb/TS2802

Help, please! i can not get the sound to work on my pc

i can not get the sound to work on my pc

Try opening the device manager and remove your sound hardware and then rediscover. This works often. Let me know how it goes.
iGirlTech

My Creative Cam wont work properly in MSN Messenger! I cant get the effects to work PLEASE HELP!

When I open the webcam centre everything works fine I can get all the effects...BUT when I open messenger (MSN) I get a good picture but when I open the effects window I cant get the effects to work in there.... I went to the creative site which tells me I can use this cam ok in MSN Messenger....Please help before I pull my hair outThankyouBillie-Jean x

I had the exact same issue but finally after much reading found that the Advanced Video FX utility must be activated first, then open the Web Cam Center.
On the upper left side just above your image is a Device Selection box. You may not redily recognize it as such.. Click on the down arrow just to the left of the Format tab and select the "Creative WebCam(With Video Effects)". Now try the effects. This did the trick for me. Hope it works for you!

I cant get my email to work on my iphone 4

hi, i cant get my email to work on my iphone, iv added my email address and password but when i go to mail there are no emails showing or accounts. my email is showing as on in settings but doesnt seem to be working. any advise would be great, thanks

There is something wrong in your settings. As the settings for each email provider are different you need to check your email server's web site for instructions. Most now have specific instructions for the iPhone. Also see Apple's instructions: http://support.apple.com/kb/HT1385

Why cant i get the sound to work on my mackbook

i tryed to play music in i tunes and the sound wont work i even pluged in headphones and it still wont work. i would like to know how do i fix the problem can someone plz help me

What do you see in System Preferences (under the Apple menu) > Sound > Output tab? Is anything selected? Where is the volume set?
Best of luck.

I cant get my sound to work

I have the MSI K8M Neo-V Socket 754 VIA K8M800 ATX AMD Motherboard. I cant get the onboard audio to work. I've downloaded and ran necessary drivers and still pc can not find an output sound device anyone have any ideas

Hai Guys,
My Machine Configuration is
K8M Neo-V V Class mother board
AMD 64
Windows XP-SP2
The problem is i am unable to get 6 channel audio in WIndows. But it is working in LINUX. What is the problem? I enabled the advanced settings from Control panel. I enabld 5.1 surround system from SOUND EFFECT COntrol panel. even though i can't get the sound. Please give me the solution.
Pradeep Viswamitra

How do y get the sound to work.

How do I get my sound to work.

I assume you have an iPad.
It would help if you give some information in your profile or your post about equipment, operating systemversion and so on.
If you are new to iPad:
Go to Settings, choose the "general" line in the left panel, then you will see the "Use side switch to:" possibilities.
Check the side Switch position.
Underneath the General is the Sounds settings, iy look there look at the most upper setting at the right.
Happy new year.

Can't get the sound to work on my 5th Gen iPod 30gig movies

For some reason, every movie that I have on my iPod, mainly music videos, have no sound. I just bought this iPod and I am still learning how to use it, however I cannot find anything in the forums to help me troubleshoot this problem. Can anyone give me any pointers on how to get my sound to work with my movies? Thanks

Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

I've been able to trick my ipod into letting me in but I still cant get the touchscreen to work. I've reset it 10 times and I dont have a computer at my house so I am unable to connect it to see whats wrong do I just need to get a new ipod or what this is

I have been able to trick my ipod into letting me in but I still can't get the touchscreen to work this is extremely annoying and I was wondering if i should just get a new ipod or what?

You need a computer with iTunes and an internet connection
Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I cant get the sound to work on my iphone 4 after i record a movie

Similar Messages

Maybe you are looking for