I cant get the volume controls to work. The only sound it will make is the ringer

My volume control will not work. I can only hear ringer if I change it in the settings

Hi gavinruth,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
- Judy

Similar Messages

Where is the remote volume control in the new ITUNES - I cant adjust my volume control remotely on my Zepplin Air anymore

Hi I have downloaded the new itunes 12.01 - since then I have had nothing but trouble with my Zepplin Air. Now I cant remotely change the volume control on it, only being able to change it on my connect

I did try that too (was already turned on). It seems like this is a big step backwards, since even if control center worked in YouTube, it requires stopping the video, opening the control center, closing it, and restarting the video. Very counterproductive to simply restoring a volume slider on the basic You Tube controller, next to the timeline slider. Again, I appreciate the help. For now, I can use the buttons on the side of the iPad (not as convenient), and hope a newer version of You Tube will restore volume controls that work in next upgrade.

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

Could you capture your screen and post it. Have the layers panel open and any layers that are collapsed, expanded. We will need to see the entire screen, as some information in the tab is important as well.

I have just transferred elements 11 to a new windows 7 64 bit computer using the original purchased disc. Organiser is working fine, but I cant get the Editor to open at all.

I have just transferred elements 11 to a new windows 7 64 bit computer using the original purchased disc. Organiser is working fine and all my photos are there, but I cant get the Editor to open. It just says editor workspace is loading and then it eventually gives up.

Try opening directly from your desktop, by passing the welcome screen.
Go to Windows Explorer>C drive>Program Files (x86)>Adobe>Photoshop elements 11. Right click, then Send to>Desktop
Double click on the shortcut and see it will open.

I cant get the number pad on the right side of my wired keyboard to work

i cant get the number pad on the right side of my wired keyboard to work. when i puch a key, my computer will either freeze or it will do nothing. Plz help me. My mac is an Intel-based mac, Running off of Mac OS X 10.4.10, not the one made out of aluminum. what should i do?

Hi, it's the old favorites - Repair Permissions, Run OnyX Maintenance App. Reboot, reset Keyboard/ Mouse settings, run Tech Tool. Try another usb keyboard on the mac or try your k/b on another computer (laptop or desk) - If have AppleCare - Call Apple. You can get a new KensingtonMac USB K/B for around $30.00 online..L

I cant get the letter A and number 1 to work on my ipod touch screen can you help me

i cant get the letter A and nimber 1 to work on my touch screen on my ipod to work.

Try the stand fixes, one at a time:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults/new iPod.

My Creative Cam wont work properly in MSN Messenger! I cant get the effects to work PLEASE HELP!

When I open the webcam centre everything works fine I can get all the effects...BUT when I open messenger (MSN) I get a good picture but when I open the effects window I cant get the effects to work in there.... I went to the creative site which tells me I can use this cam ok in MSN Messenger....Please help before I pull my hair outThankyouBillie-Jean x

I had the exact same issue but finally after much reading found that the Advanced Video FX utility must be activated first, then open the Web Cam Center.
On the upper left side just above your image is a Device Selection box. You may not redily recognize it as such.. Click on the down arrow just to the left of the Format tab and select the "Creative WebCam(With Video Effects)". Now try the effects. This did the trick for me. Hope it works for you!

My volume button seems stuck,i cant get the volume to go up,any ideas?

ON my ipad2 the volume button is stuck,i cant get the volume to go up.any ideas?

Thanks for the link ..so far I was only able to acces the utility disk, it says my disk needs repair but while attempting to repair it I get the following: Invalid record count...Any ideas on what should I try next????
I appreciate your help!

I have a ipad 2 3g and i cant get the 3g to work

i have a ipad 2 3g and i cant get the 3g to work

Well .... there's zero useful information there. Absent any other information, I guess I could say go to Settings and turn Cellular ON.
Seriously, try writing things more like this:
I don't understand what you're saying. Please try the following if you'd like to save yourself and others a lot of time:
Describe what you are trying to do
Describe how you are trying to do it, in as much detail as you can.
Describe what you expect to see or have happen when you do it that way
Describe what you see or what happens instead of what you expected; include any error messages that appear.
Provide some idea of what you have already looked at or already tried doing to fix the problem, along with the results of those attempts.

[SOLVED] how do i get laptop volume control to function?

On my toshiba laptop, my sound "works" however the rotary volume control at front of the laptop does not affect the volume. When I turn it the volume bar appears on the display but nothing happens. This used to work but I have been "playing" with my arch system to try and gain knowledge of arch et.al and now I have broke something and cannot remember how to revert back.
I am running kdemod(4.2). SystemSettings->Multimedia shows four "cards":
HDA Intel ALC268 (analog)
HDA Intel ALC268 (digital)
Esound (ESD)
HDA Intel ALC268 (IEC958 (S/PDIF) Digital Audio Output)
p.s. I can only get sound of the Analog device. The "test" button doesnt do anything with the other devices selected.
Soundchip reported by "lspci":
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Soundmodules reported by "hwdetect --show-sound":
SOUND : snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore
modprobe.conf:
# /etc/modprobe.conf (for v2.6 kernels)
options i915 modeset=1
alias net-pf-10 off
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(mii r8169 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="daz"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#eth0="dhcp"
# Wireless: See network profiles below
#eth0="dhcp"
#INTERFACES=(eth0)
wlan0="wlan0 192.168.0.10 netmask 255.255.255.0"
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(preload hal @cpufreq @networkmanager @kdm)
would really appreciate if someone could get my volume control working.
Last edited by keratos (2009-05-04 12:33:57)

Wilco wrote:Edit: misread your post..., anyway you need to set the main volume control to the one that produces sound, in your case analog.
eh ?? how is a volume control 'set' to the analog card?
Last edited by keratos (2009-05-04 08:10:52)

Tecra P5 - Volume control doesnt work properly

Hi
Since upgrade to Windows 7 64 bit I can't turn the volume all the way down by using the volume control at the front of the notebook. Worked fine under Vista 32 bit.
The volume control still works but no matter how far I wind it to the left there is still sound coming from the speakers.
Any help appreciated.
Thanks
Warren

As far as I know volume control in the past was mechanical but now it works on different way and it is controlled by specific tool/utility.
To be honest Tecra P5 is not known to me but obviously it is Australian notebook model and according to Australian support page this notebook model is not supported for Windows 7.
That doesnt mean you cannot use it but this means there is not software package designed for Windows 7 that can be installed so I think there is no much you can do about it.
I know it is annoying but for volume control you can use Windows option placed in task bar.

Hp pavilion g6 1b60us, cant get the WIFI, Ethernet, ex, drivers to install

I have a hp pavilion g6 1b60us
And I reinstalled Windows 7 Home Premium (64 Bit) with a fresh install of Windows 7 ultimate (64 Bit)
removing the recovery partitions too.
Now i cant get the drivers for the wifi and Ethernet to install...the ones i get from HP driver support install up to the point of right after the extraction,
it opens the installer and then a short glimpse of CMD box then the installer just poofs away.
I tried reinstalling windows and tried using other versions of the drivers, nothing worked all the same thing.
so there's no way for me to get online from that laptop and let it grab it's own drivers
i need help on getting the wifi or Ethernet to work
i herd there might be a chip-set that i might need that's got all the drivers in it? O.o

You're very welcome.
Sure you can do that, or copy them to a usb flash drive...
First you have to go to the AMD website and download the chipset driver. First file listed.
Install this driver first and reboot. This will install the SM Bus controller.
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2
Then you can install these driver in whatever order you wish.
ETHERNET CONTROLLER
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-1&cc=us&dlc=en&lc=en...=
NETWORK CONTROLLER
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111781-1&cc=us&dlc=en&lc=en...=
PCI DEVICE
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-1&cc=us&dlc=en&lc=en...=

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

Select_list_from_lov, cant get the returning value

Hi
I try to use a apex_item.select_list_from_lov in a wizard. The LOV that I have is a dynamic list.
everything works fine, only I cant get the return value of the selected items.
multi select list
htp.p(apex_item.SELECT_LIST_FROM_LOV
( 2,
'MOS_ROL_OMSCHRIJVING',
' MULTIPLE HEIGHT=5',
'NO',
null,
null,
null,
null,
'NO')
trying to see what the return values are, but got nothing.
:p12_test := :f02;
(p12_test is a textfield)
any assistance would be greatly appreciated.
Thanks
using apex 4.0.

>
trying to see what the return values are, but got nothing.
:p12_test := :f02;
(p12_test is a textfield)
>
f02 is an associative array. See Referencing Arrays in the APEX API Reference for information on how to access values of items created using apex_item methods.

I cant get the volume controls to work. The only sound it will make is the ringer

Similar Messages

Maybe you are looking for