I CANT HEAR MYSELF WHILE RECORDING!

im running with both audition 1.5 and 3.0, tried both, neither one will let me hear myself while im recording...my mic is directly plugged into a presonus inspire 1394, as well as my headphones...but i cannot hear myself!...
please help, this is driving me nuts!

Hmm... haven't had to scroll the screen for such a short question before! I'm afraid you get the answer in normal size text though.
SickLLSeLLMusic wrote:
im running with both audition 1.5 and 3.0, tried both, neither one will let me hear myself while im recording...my mic is directly plugged into a presonus inspire 1394, as well as my headphones...but i cannot hear myself!... please help, this is driving me nuts!
Direct monitoring is a function of your Presonus, not Audition. So, you need to read the manual and find out how to set it up on its control panel. You can monitor through the software in Audition 3.0 but this introduces latency, because you have to process everything in and out via the OS, and generally the delays are unacceptable. So for normal purposes, this is done via the direct link in your sound device, which introduces no latency at all.

Similar Messages

I cant hear my video recording voice in iphone 5

i record the video but cant hear my voice after all audio recording is clear and good

Hi Salmanxrg,
So all other audio recording are okay except video recordings.
Note there are 3 micrphones on the iPhone 5. Make sure they are all clear.
iPhone: Microphone issues
2 .Make sure nothing is blocking any of the microphones (refer to the pictures below to find your device's microphones). Check for these:
Dirt or debris
A screen protector or case
If that isn't it, please check out the rest of the article.
Take care,
Nubz

Cant hear audio while capturing

Hi
When I capture video & audio, i cant hear the audio from my source. However, the audio is captured and embedded in the clip when i look at it after the capture.
Do i have to turn on some monitoring function of some sort maybe?
Im capturing with an Black Magic card via SDI Embedded Audio.
Maybe someone have a clue.
//Lukasz

We're here all week, try the liver.
I've always been a believer in monitoring in the signal chain. Granted I don't work much with HDV-- but monitoring what is going into and out of the computer, rather than relying on the computer's built in audio seems to be the way to go. Then you know what's coming off the tape, and what's going back down to the tape.

Cant hear voice while calling...

Most of time it happen when I call I cant hear voice of other person and many time other person cannot hear my voice.
Kindly check for this issue
Regards,

I have the same problem. I have the volume at the max 10, and can hardly hear the other person speaking and this happens on ALL calls.
If it's not one problem then it's another with this phone

Yamaha ES Rack -Setup to hear sounds while recording

I am running my radium controller USB to Computer then USB from Computer to Yamaha Rack. I have audio output set to my M Audio SOLO though dont have ES connected to it.
I have set up the ES to USB (in utility) and created a multi track midi in the environment.
1. Do I set the port for the multi instrument to PORT 1 or to Yamaha ES rack?
2. Do I need to do anything else in the environment other than create multitrack instrument and enable channels (I did 4)?
3!! How can I hear the ES sound while I am recording?
Thank you so much in advance..Im 15 hours in and read every forum I can find..NO answer..
By chance does anyone have the .lso file for the rack?
Mr Hep

Hey Scott
You and ALOT of people are attempting to do this, myself included.
Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
HOWEVER:
A few things CAN be done:
IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
(SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
Good luck!
Treatment

Cant hear what im recording in realtime on my headphones

hello thank you for taking a look at my post, i use soundbooth for little recording music projects, i know its not for that but i use it because its simple and gets the job done. however i got a BOSS dr. rhythm drum machine DR-770 and i have it plugged into the the 3.5 headphone jack on my drum machine going into my mic jack on my computer and it records perfectly in soudbooth but when i put on headphones i can't hear what im playing in real time.
is there a setting i have to change? something im missing? thank you for reading!

There is no way to do what you want to so. No such app exists and there is no way to connect the two devices via Bluetooth for the purpose that you want.

Cant hear audio nor record videos

Just got a new Mac and seem to be missing some features found in my iMovie HD Tiger based Mac.
1. When I wish to import video I usually will play it first and for some reason I cannot hear any sound on my Mac. Why is this? I am using a FireWire based Camcorder and iMovie HD was able to play with sound.
2. Also I want to record a video using my Camcorder and not use up tape space. This could be done easily in iMovie HD. I tried to do this in iMovie 09 but it only recorded like 10 seconds before cutting out. The built in iSight Camera in the MacBook is lousy, so I wont use that instead.
John

1. When I wish to import video I usually will play it first and for some reason I cannot hear any >sound
on my Mac. Why is this? I am using a FireWire based Camcorder and iMovie HD was able to play >with
sound.
iMove 09 does not play sound on import, but the sound is there when you edit. Apple has never said why they chose to do it this way, but a likely explanation is that iMovie was designed to work with many different camcorders including SDHC card, hard disk, DVD, and DV. Of these DV is the only one where it makes sense to play sound on import since the others import faster or slower than real time, depending on your equipment. So Apple probably decided to make the behavior consistent for all formats. Just a guess. Most DV camcorders have a speaker, so you can still get sound if you need it.

Cant hear anything or record

I am trying to use a presonus firebox to record with and I cannot get any sound to record to my computer nor hear anything through headphones I have recorded tons of stuff on Garageband no problem but I cannot get anything though Logic. SOmething I'm missing?

Connect your headphones/monitor speakers to your Firebox, or create an aggregate device in Audio/MIDI set up.
http://support.apple.com/kb/HT1215
Unlike GarageBand, you can't have separate input/output devices in Logic.

Cant Hear My Guitar

Hello I recorded a rythm guitar track and I can hear it but when I press the PLAY button in multitrack it mutes my windows play control line in input lol. So I cant hear myself playing to practice the solo for the solo guitar track before recording and its getting very very annoying. Someone knows how to fix that in AA3 options? Thanks in advance.

It's not really possible to answer this one with the information you've provided (hence the lack of replies so far) but I can try to give you some general guidelines.
For the most part, the routing of signals in and out of Audition isn't handled by AA itself but, rather, by Windows and/or the software that was installed in Windows by your sound card.
The basic thing you need to do is set this software (often the "Windows Mixer") so that, on the playback side, you're listening to something called "Wave Out" or "Stereo Mix" or similar. On the recording side, you will want this selected to "Line In" or "Mic In" or similar.
However, this is where it gets complicated because there are a lot of variations in exactly how to do this, based both on your version of Windows and the make/model of sound card installed in your PC. Complicating this further are things like the rather convoluted audio setup in the most recent versions of Windows (Vista and Windows 7) and also the fact that some basic on-board sound cards are so basic that they don't support the kind of things you wish to do. You MAY find you need to invest in a relatively inexpensive USB2 external card.
There are also a couple of things within Audition to check. Under the Edit menu, click on "Audio Hardware setup" and make sure that the sound card you wish to use is selected as the default output. On the same menu there's also a drop down menu to select the software driver you wish to use--this will likely be correct but if you find more than one option you'll lose nothing by trying another one (so long as you put it back as it was if that doesn't help).
Sorry to be so vague but, as you can hopefully see, giving a specific answer will depend on having details of the Windows version and sound card you are using plus details of how you're trying to route your audio at present.
Bob

Cant hear real instruments on playback in Garage band

Can anyone tell me why I can't hear the real instruments in my song in garage band version 5.1 on macbook. I could hear everything while recording the tracks and the last time I listened to the song but now all I can hear are the software instruments. I can see the WAV data and the VU meters are moving on every track. I opened up a different song and I could here the real instrument on it. All settings etc are the same , nothing is solo'd, ? ! Any ideas please ? !

In the new GarageBand the quantize is per region.
For a real instrument region open the Track editor.
Select the "track" tab and click "Enable Flex"
Select the "Region" tab and you will see the "quantize" control.

Recently got a iphone5s can hear someone call me but they cant hear me

Hello i recently got a new phone iphone5s and i can hear someone call me perfectly fine but they cant hear me and also the phone wont recognize the headphones. it would treat it like the headphones arnt in and also i tried to make a video and cant hear myself speak

Hello Sylviaxox,
It seems you are experiencing an issue with the microphone of your iPhone. That does sound troublesome. The following article provides troubleshooting guidance which may help you find a solution:
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
Fix common issues
Follow these steps, testing after each with Voice Memos.
Unplug anything plugged into the headset jack.
If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
Restart your device.
Update to the latest version of iOS.
If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Cant hear song playback while recording with external USB Interface Mic in Garageband

Hi there
There must be something wrong with my settings in Gargaeband/Mac Sound Settings.
I have Garageband 9 (V5.1) running a song I have already recorded using a USB keyboard.
I want to record using my external mic and my USB Audio Interface, so
I select New Track> Real Instrument
I plug in my Yamaha Audiogram 3 USB AUdio Interface and I get a pop up stating
"Garageband is scanning your system for audio devices, and has detected a device named "USB Audio Codec"
If you want to use this device do not disconnect it during the scanning process.
Do you want to use this devise No/Yes."
I select Yes and INPUT SOURCE changes from
Mono 1 (Built-in Microphone)
to
Mono 1 (USB Audio CODEC)
I can see the signal lights lighting up on the audiogram 3 when I talk into the mic, so theres no problem there.
Also when I hit record I can record audio using the mic, and can see the levels (and the audio wave I am creating being drawn on the screen) but I cannot hear the track itself when I am recording using the mic. Nor can I hear the track or the new mic recorded audio AFTER I have hit stop.
The only way to hear the song again with the newly recorded mic track is to unplug the Audiogram 3 (Then I get another Pop-up stating
"The audio device "USB Audio CODEC" has been disconnected!
Do you want to switch to Built-in Audio or quit Garageband?"
I select USE BUILT-IN AUDIO)
Then the input source changes back to
Mono 1 (Built-in Microphone)
And I can hear the track again.
So my problem as you can see if that I cant hear the track while recording using the microphone with the Audiogram 3.
But I can record video with audio using the audiogram 3 USB Audio Inteface and mic using photobooth when I select change Sound>Input to USB Audio Codec in system preferences
It therefore assume it must be a problem with the internal audio settings of the mac/garageband.
Can anyone advise?
thanks!

I can see the signal lights lighting up on the audiogram 3 when I talk into the mic, so theres no problem there.
Also when I hit record I can record audio using the mic, and can see the levels (and the audio wave I am creating being drawn on the screen) but I cannot hear the track itself when I am recording using the mic. Nor can I hear the track or the new mic recorded audio AFTER I have hit stop.
In order to hear yourself while you are recording, you need to set Monitor to "ON" under the Track Info panel.
Also, what are your sound output settings? It sounds like you haven't selected the right output source.
If your speakers or headphones are plugged into your audio interface, then you need to go into Preferences -> Audio/MIDI and select your audio interface under Output as well as Input. If your speakers or headphones are built-in or plugged directly into your computer, then you need to select Built-In under Output.
I have a sneaky feeling that you are in the latter scenario, and that when you plug in your audio interface Garageband is automatically switching both Input and Output over to your interface, which means no sound output as long as the interface is plugged in.

I hear myself twice while i record myself....help!

I hear myself twice whilst the actual recording records one time. I have tried if it has anything to do with my usb mic but I checked using the input and output from my laptop and there i have the same problem. So it must be something in the settings of the laptop or Logic? Any ideas....?

It´s latency. Go to Audio preferences and reduce buffer setting to 64 or 32. There will still be some delay, but not that much. To avoid latency: record through an audio interface, mute the input channel and monitor through the interface.

Error while trying to synchronize Audio and MIDI. plz help i cant hear anything

plz help me i cant hear nothing and its says: Error while trying to synchronize Audio and MIDI.
Sample Rate 38536 recognized.
Check conflict between Logic Pro X and external device. ???????? PLZ HELP

It means you are overtaxing the CPU, likely with just one (3rd party-)software instrument plugin. Ignore the word "external", in this context it often means "3rd party plugin".
So what synth is it? Since you're Dutch, it's probably one of the trancy dancy synths, such as Albino, Diva, Sylenth or Massive... I could be wrong though...
The best way to avoid this message is to Freeze the track with the guilty synner - however, a frozen track cannot be edited, so if that is a problem, you will have to make the synth itself run lighter, which can be achieved by turning of internal effects that are ON the synth itself, especially reverb.
http://help.apple.com/logicpro/mac/10/#lgcpf1cbfd51

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

I CANT HEAR MYSELF WHILE RECORDING!

Similar Messages

Maybe you are looking for