I cant hear voice from other side and sometime they cant hear me any suggestions please

Hi there,
    While calling lot of times I am not able to hear voice from other side and sometimes they are not able to hear my voice but call continues and voice start coming and stops suddenly, I have tried with other sims too. I have tried on other set they are fine but this problem is with only iPhone 4. Please help me out for this problem.
Harry

Hi, are you still having this problem? or what did u do to get rid of that problem? I started having this problem yesterday. Calls from skype, viber and others app are working fine. but when I call from my operator it does exactly same as you are experiencing. Please reply me if you have made it working fine again.

Similar Messages

  • I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

    I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

    RE: SATA Bus speed:
    Typical Rotating drives available today, whatever their SATA spec, can source data off the spinning platters no faster than about 125MBytes/sec.
    SATA 3 is rated at 6G bits/sec, which theoretically is about 750 Mega Bytes/sec
    SATA 2 is rated at 3G bits/sec, which is theoretically about 375 Mega Bytes/sec
    SATA 1 is rated at 1.5G bits/sec, which is theoretically about 187.5 Meg Bytes/sec
    None of the SATA Busses is a bottleneck for consumer Rotating drives you can buy today. Trying to speed up the SATA Bus will not provide any real-world performance increases for Rotating Drives.
    https://discussions.apple.com/message/22690384

  • I bought a iPod from my friend and erased all content from the iPod and the screen is white? Any suggestions

    I bought a iPod touch 4g from my friend and I erased all content from the iPod and the screen went black, to the apple sign, then to a white screen and stayed like that, what do I do?

    Did you try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

  • When i open my emails with outlook first and then with my ipad 4, the ipad does not show me that i have new mail despite that it actually downloads them. iphone 3g and 4s used to do that. any suggestions please?

    when i open my emails with outlook first and then with my ipad 4, the ipad does not show me that i have new mail despite that it actually downloads them. iphone 3g and 4s used to show them as new emails. any suggestions?

    1. Open iTunes.
    2. Click the View option in the iTunes menu.
    3. Select the Show Sidebar option.
    Connect your phone, select it in the Sidebar...the various tabs will now show as before.

  • Samplitude 2496 and Audigy 4 sound card problem any suggestions please

    Hello
    I have a problem. I have installed Audigy 4. All looks good. I am editing music in a software called Samplitude 2496. But I simply cannot playback. I beleive Samplitude needs ASIO support to be able to playback. A window pops up when ever I try to playback saying
    "Cannot open waveform output device 'SB Audigy 4[D800]'!
    "The specified format is not support or cannot be translated. Use the capabilities function to determine the supported format".
    I cannot find any ASIO in my system yet Audigy 4 says it has ASIO2 support. Does this mean Audigy software has the ASIO or does this mean I need to download the ASIO for the Samplitude playback.
    Any suggestions most welcome urgently.
    Thank you Philip

    If you have installed Creative bundled drivers for your card, ASIO drivers are installed already. Check on Samplitude Audio settings, if you see those drivers listed there -> NOTE:! you need to select ASIO 24/96 driver for 24/96 data. AFAIK, other (two) CT ASIO drivers supports 6/48 only (least this is the situation w/ Audigy 2).
    You can find more information on ASIO @
    http://forums.creative.com/creativelabs/board/message?board.id=profaudio&message.id=726
    jutapa

  • Trying to upload to websites today from Adobe Muse and get error:21 message. Any help please?

    Hi,
    I keep getting this message. Can anyone help please?
    An unknown authentication error has occurred using your AdobeID
    (SHARED_UNKNOWN_ERROR:21)
    THANKS
    Celia

    Hi, as no response from anyone and the issues still causing problems this morning, I uninstalled Muse and Re-installed. Seems to work ok now. Hope that helps anyone else with same issue.

  • I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

    i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

    Did you fix the problem? I have the same problem and it has been pain in the neck.

  • Count moving object (Inter the ROI from one side and leave ROI from other side)

    Hello All
    I want to design program that can counting moving object that inter ROI from one side and come out from the other side, I want to give each object ID number
    I have design a program that compare between object distances from one frame to the next frame, but the program efficiency is very low
    If any one can give me a sample code that I can use or modify it to suite my application

    Hello,
    you will find the code in the attachment (saved for LV2013). There is a longer delay inside the loop, remove it for efficiency.
    Roughly measuring the time to read an image, the processing takes ~8 ms on my computer (~500x200 image resolution). That is ~125 samples/images per second. Is this not fast enough for you? Considering better image resolution, the time is of course increased.
    My specifications:
    Core i7 3632QM
    6 Gb RAM
    Win 7 x64 (Labview x86 though).
    Best regards,
    K
    https://decibel.ni.com/content/blogs/kl3m3n
    "Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."
    Attachments:
    IDMovingObjects.zip ‏64 KB

  • I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

    I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

    There is nothing anyone can do.
    Sorry.
    You will have to keep looking for it

  • I can only hear sound from one side of the head phone

    I've plug in my bass guitar through a cord and a converter in the line in port on my PC. Then checked 'listen to this device' (head phone) which is connected properly as it worked perfectly when I play any sound in ma PC. But when I play my guitar, I can
    only hear it from one side of the head phone. How to fix it!?

    Is that compatible to give output from both sides (R + L) ? Can you check same thing on other system ? 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but fro

    ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

    ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

  • Iphone 5 broke switched to old iphone 4 but cant get texts from other iphone users cant do anything with iphone 5 like i said its wayy broke

    IPhone 5 broke switched to old iPhone 4 but cant receive texts from other iPhone users cant do anything with iPhone 5 screen does not work

    I'm guessing that you turned off the iPhone 5? If so, then are you using the same phone number as the 5? You need to go into Settings>Messages>make sure that iMessage is turned on and activated. Then go the Send & Receive and find out if your current number is checked.

  • Switching from Iphone 4 to Android, now i cant get txts from other Iphone users... any suggestions?

    switching from Iphone 4 to Android, now i cant get txts from other Iphone users... any suggestions?

    http://support.apple.com/kb/TS5185

  • TS5185 Hi After I have report a junk message I coudl not get Imessge from other iphone. and could not send any message in blue color but green which need to pay for.

    Hi After I have report a junk message to 7726, I coudl not get Imessge from other iphones. and could not send any message in blue color but green which need to pay for. Does Apple blocked my imessage ? I have checked the setting. imessage is on.
    Thanks,
    J

    Make sure that your date and time settings and time zone are accurate (Settings - General - Date and Time). Reset your phone to 'Set Automatically' and then try signing in again - this worked for me.  My date/time settings were not automatic (candy crush cheats!!).

  • When i use head phones i can hear sound from other people in the room

    when i use head phones i can hear sound from other people in the room

    Can you please tell us which notebook model do you have?
    Is some sound manager preinstalled on your notebook? You can find it in control panel. Is there something like Realtek sound manager?

Maybe you are looking for

  • Error While Deploying OSM Cartridge

    I am getting the below error when I try to deploy my composite cartridge. Can you anyone help me out with this, has anyone faced a similar issue. <27-Jan-2015 3:38:36,349 IST PM> <ERROR> <cartridgemgmt.DeployCartridgeMDB> <[ACTIVE] ExecuteThread: '13

  • How to create image swap buttons

    I'm not sure where to post this question, but it involves images and was wondering if Fw is the place to start. I want to create a retro car radio navigation for a web site. Old push-button radios usually had an indicator that travelled behind the nu

  • Machinarium - a new game with a Linux client

    Machinarium is an indie adventure game written in Flash. You steer a small robot through a wonderfully painted robot world. To get a feel of the game play, you can play Samorost, an earlier game by the developers, for free or try the demo. To get the

  • SQL data extraction?

    Hi, can nay one here tell me what is SQL data extraction? in one on my requirements it was written simply SQL data extraction as flat file then modelling the data flow for the falt file to the BW. is it something related to database? explain me Thank

  • Can't create OBD for Stock transfer order

    HI gurus , I created an allocation table with the type 0001 standard allocation ,item category C ,and saved it . Then I created the follow-on doc ,a PO generated for DC to vendor  ,and I have done the inbound delivery for this PO of DC . After that ,