I cant install firefox 4 not doing anything after extracting 99%

i uninstalled firefox beta 12 to install firefox 4 rc but RC not installing :( its showing extracting then no change..!! :(

Similar Messages

P67A-GD55 (B3) Not doing anything after three beeps

Hi
I recently purchased an R9 280X GPU and tried to use it with my P67A-GD55 (B3) mobo.
I don't change hardware without switching the PSU off and removing the power cord.
After getting power back on the computer it wouldn't even beep. There were lights on the motherboard and all the fans were spinning. Still, no video and nothing happening.
I switched back to my old GPU (a Radeon 6950) and the computer worked fine was again.
I read some older mobos have some problems with PCI 3.0 cards and a bios update is in order. I purchased my mobo back in 2011 so I thought this'd fit me.
I first found the live update tool and was about to try that but the manual says not to use it for bios updates.
So, next step was looking to manually update. Used the instructions from the msi website
- Updating BIOS in Windows Mode for Intel (PXX/ZXX/X79) - Updating System BIOS version with Intel ME 7 to BIOS version with Intel ME 8
Got me up to the point where the PC reboots but then instead of the message it was supposed to show me it didn't show anything.
There were 3 beeps (1 long, 2 short) and then a reboot. Then it made a long beep, a pause and 2 paused beeps (toooooot - tooot toooot if that makes sense) and afterwards, nothing. Fans and lights on but no video and nothing else happened for an hour.
I found some bios recovery instructions under -> MSI USA Online Technical Support FAQ <- but at this point I don't know if I should follow those or something else in oder to recover my computer and not permanently brick it (if I haven't already).
Any help would be more than welcome.
Thanks in advance.

Quote
- Updating BIOS in Windows Mode for Intel
Should have read further down in the SOP and seen the flash method done in DOS mode and used that. Your board is now bricked. A shop with an SPI flash programmer device can restore it, or an MSI Service Center. Both ways will incur financial costs.

On shut down I always get the message Program Not Responding. This happened before I installed Firefox. It does not pose a problem, that I know of but it does concern me.

On shut down I always get the message Program Not Responding. This happened before I installed Firefox. It does not pose a problem, that I know of, but it does concern me because I always have to End Program manually when I get this message.
== Over a year ago.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
SeaMonkey

I cant install firefox,i was using it before and when it try to update to the new version18.2,it didnt install,so i uninstall it & couldnt install it again

i am using Firefox as my primary browser and to a much little degree chrome, i have noticed that after i installed some programs like new acrobat, new Java update and Microsoft visual c +++ 2010 that first chrome is not playing videos anymore and the plug inn were disabled. in the same time a new auto update for Firefox failed to install, then i tried to uninstall fire fox and chrome and install them again but after successful uninstall i couldn't reinstall them again, when i click on the installation file just it doesn't give me anything after extracting....
ialso uninstalled all the program i mentioned before and try to install firefox but i failed
i am using windows 7 64bit

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. Help!

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. These extra pages resulted from using Autoflow and now we can't seem to get rid of them. Help!

Good morning Old Toad.
I did as you suggested:
1) Booted from install CD.
2) Ran Disk Utilities on internal hard drive--no repairs necessary. For good measure, did the same thing on external drive. Also no repairs necessary.
3) Checked software update--no updates found. About this Mac said I was already running 10.4.7. For good measure, I downloaded the latest and installed it. Since it let me run the install, I'm not sure if I installed something new or reinstalled what I already had.
4) I rebooted from CD, ran disk utilities, ran repair disk--no repairs necessary. Repaired permissions and a lot of permissions repaired.
5) Tried to delete the files and the same old thing happened: kernel panic. The specific message:
panic(cpu 0 caller 0x00102A08): jnl: transaction too big (1587712 >= 1572352 bytes, bufsize 8192, tr 0x29f1fb0 bp 0x2801de40)
So there's no change in my status.
I'm trying to delete the files because:
A) They already take .5 Gb.
B) I can't get rid of them ever. If I move the problem files to a different folder, I can only do one successful drag-and-drop backup to the external drive until the "new" thumb segments become unerasable just like the previous versions and crash the system.
C) I can't even "just" drag and drop every file/folder except the thumbs, because that ends up crashing the system as well. So I have to drag and drop every file/folder in the iPhoto hierarchy individually. Which makes me less inclined to backup, which defeats the purpose of a backup.
D) After the iPhoto fiasco I'm just crabby about all the Apple screw-ups I'm experiencing and I want to get them fixed.
Thanks for your help. Any additional suggestions would be appreciated.
G4 Mac OS X (10.4.6)

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

After I tried to update my Ipad mini, it kept saying hello in different languages on my lock screen and then when I slide across, it says connected to itunes but it's not doing anything!! Please help!!! And by the way it's plugged into the laptop to itune

After I tried to update my Ipad mini to the newest update, it kept saying hello on my lock screen in different languages and then when I slide the screen across, it says connected to itunes but it's not doing anything!! By the way my Ipad mini is plugged into my computer and connected to itunes!! Please help me!!

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Redirect rule not doing anything

Note that the email account the the follwing applies to is a gmail account
I have a rule in Mail that sends all emails from Macworld, Mac-Forums, and MacWeek to a folder (OK, a label in gmail parlance) and flags it "green" (so I can find them easliy and read them later). Problem is the rule is not doing anything. Ideas?

Doesn't work for three days, but as soon as I post a message it starts working. #sigh
Actually, restarting the Mail program seemed to fix it.

I came home and i came home and my iphone is now frozzen on the applmy iphone is now frozzen on the apple screen and it hasnt been doing anything i put it in the charger and its not doing anything how do i get it to work so i can text and call and stuff

i came home and my iphone is now frozzen on the apple screen and it hasnt been doing anything i put it in the charger and its not doing anything how do i get it to work so i can text and call and stuff

I got to that page but clicking on the Subscribe Free had no effect.
Nothing showed in the Podcasts nor the iTunes U.
In fact I also subscribed to Stanford's lectures and despite actually managing to DL them there is still no subscription in iTunes U, just the Intro to Computer Science belatedly.
Peter
I'd like to attach the screen grab of the out of order and randomly DLed selection of Harvard's course, but the forum won't let me attach it even though it is only 456k. Correction, close post and retry and now it lets me. NB how intermittent the DLs are and in no particular order.

HT203548 I'm having problems with Siri on my iPhone 6. It worked briefly yesterday and now its not doing anything. I have turned phone off and on and made sure everything is on in settings. Please help!

I'm having problems with Siri on my iPhone 6. It worked briefly yesterday and now its not doing anything. I have turned phone off and on and made sure everything is on in settings. Please help!

Do you have an active data connection (wifi or cellular)? Have you tried resetting the phone by pressing and holding the Home and power buttons until the apple appears (this is different than just turning it off and back on).

I lost my contacts on my 3gs and was not doing anything with the phone.. it was plugged into the wall charging

I lost my contacts on my 3gs and was not doing anything with the phone.. it was plugged into the wall charging... can anyone help??

cannect it to a computer and let it sync through iTunes. Contacts are a broad problem. You need to state where your contacts are located i.e. do you use yahoo mail? do you sync to iCloud? there are alot of answers for you problem but you need to be a little more detailed

HT4623 I updated my iphone to the new version and now it tells me to connect to itunes which I did and it's not doing anything else, what do I need to do?

I updated my iphone to the new version and now it tells me to connect to itunes which I did and it's not doing anything else, what do I need to do?

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore

My network symbol keeps working on my home page even when I'm not doing anything, I know there has been problems in the past with this so has it come back, help it's killing my battery!

My network symbol keeps working on my home page even when I'm not doing anything, I know there has been problems in the past with this so has it come back, help it's killing my battery!

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I am trying to use the "This solved my question - 10 points" and the "This helped me - 5 points" but they are NOT doing anything. How do I award the points ?

I am trying to use the "This solved my question - 10 points" an the "This helped me - 5 points" but they are NOT doing anything. How do I award the points ?

Are you talking about the "Legend" panel at the right of the window?
Those text are just help texts explaining the reputation points. You can only award points, if you are the original poster of a question. Then you will see active buttons to award points below the answers you receive. See here for more information: https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards
Léonie

I just got a new docking system so i plugged it in and put in my ipod, then straight away my screen went white and now its not doing anything! please help!!

! just got a new docking system so i plugged it in to my computer because it wasnt the wall charge type, so I put in my ipod, then straight away my screen went white and now its not doing anything! i press the home and lock button nothing happens... then i plug it in my computer it doesnt come up in itunes or even the copmuter. please help i can not live with out my ipod!

Your post is abit confusing, especially on getting those weird messages and emails,( assumed in your Windows machine.)
Most likely you have Restored the iPod using the new Macbook pro, using the same name as that in your Windows machine, hence the duplicate name warning, as it is trying to sync Automatically.
If you are syncing your iPod to both the Mac and Windows, you must set it to Manually Manage Music, in the first machine that you setup iTunes with the iPod. Read thsi Apple Support Article
In iTunes, Preference, tick on Prevent devices syncing automatically
Hopefully your music are still in both your iTunes library,
Connect the iPod to the Mac
Restore it (just to fix any filesystem corruption by the Windows end)
Set it to Manually Manage Music
Sync your selected songs in your library.
Whern sync complete, Eject it
Connect it to your Windows PC.
Select the song in the library
Sync it.
It should work if your ipod Hardisk is not giving any problem.
Good luck!

I cant install firefox 4 not doing anything after extracting 99%

Similar Messages

Maybe you are looking for