I cant install nw2004s in D or E drive

HI,
I am not gettting to drive to select before installation the installation is by default in c drive under c:\usr\sap by default..
How can i install my SAP in D drive? ro E drive

Hi Surya,
Does the issue still persist? If you have tried using C drive initially and never competed the installation, then chances are there that the installation files are still
pointing towards the C: directory. If you do not have any useful data & u wish to format ( you will lose all data in c drive if u format) & try a fresh installation.
Hope this helps
Sundar

Similar Messages

  • Cant install xp on S-ATA single drive.

    Hey I am building a new machine with a single s-ata hard drive and 3 other ide roms. I am using a 865pe neo2 board. The board has no promise chip so there is only two s-ata conectors. I am using a WD Caviar 80gig with 8mb buffer. I left the jumper on master and pluged it into the s-ata1 port. I have read many s-ata questions on the forum and have tried to change the settings on the bios from legacy to native and also messed with the DDR voltage. I can recognize the hard disk in the bios and it posts succesful. I have the bios set to native, S-ata only, enabled p-ata, both, S-ata first. I can start the install of windows XP pro with service pack1 and it will format and install files but when the system reboots and the xp loggo comes it loads and then goes to a blue screen with a hard disk config error. Please help!
    400w psu
    865pe neo2
    Pentium 4 533/512k 2.8gighz
    WD Caviar S-ATA 80gig 8mb buffer and sure connect cable
    512 DDR 333
    Asus 52x rom
    Creative DVD Rom
    Yamaha Burner
    Radeon Pro 9000 128mb

    :bonk:Ok I changed the overclocking to disabled and then I reinstalled xp. The setup rebooted and went to the windows logo and when the logo screen droped I got a blue error screen asking me to check my Hard disk config. I read the S-ata link and I dont have a cell phone or any  radios in my computer room. I have not tied any cables together and I have used a special sure connect cable made by WD for there Caviar S-ata drives. I have built 2 other systems with raid s-ata 0 configs, but they were both asus boards. I just dont think I understand the MSI board. I really like it and I have thought about changing my computers to MSI boards but I need to get this one working before I would do that. If you have any other ideas I would greatly apreciate it. I dont really understand the shadow cache option or the system cache. Do you think it could have something to do with those?

  • Cant install Tiger to G4/500 (original) drive

    Im really stumped as I can run Tiger on another (slower) drive if I swap, on my old g4/500 dual. Ive run DU on the default IBM Deskstar (7200 rpm) drive and it formats the drive fine. Ive run TTP and it doesnt note any errors with this drive (or with any other part of the g4/500 dual).
    What does happen when you load Tiger Retail OSX DVD ? It gives "Errors were noted during the installation". Choice is consistently to "RETRY". The error log is viewable but not substantive enough to decipher. Ive tried messing with the drives jumper, but system profile notes that the drive is running as Master anyway.
    Any ideas ? TIA

    When you formatted the drive did you select the option to "Zero Out Data"?
    This procedure verifies the integrity of the drive media, and identifies and cordons off the blocks of the drive that are unreliable. The standard format procedure simply erases the directory and does nothing to check which parts of the drive you cannot read / write to without error.
    I suggest you "zero" the drive, but be warned this takes time - many hours, depending on the size of the drive.

  • Cant install from 10.6 to 10.6.2

    Hello. Im the owner of a MacBook 2.0Ghz Core 2 Duo with snow leopard 10.6 and im trying to update to 10.6.2 i downloaded the 10.6.2 and the 10.6.2 Combo in both i cant update in the installer window when i choose the Hard Drive i got the message saying cant install the update in this hard drive . This volume does not fulfill the necessary requirements for the update .
    I got 150GB of free space . I dont understand please help.
    Thanks in advance!

    Welcome to Apple Discussions.
    There are several steps to try. These are not in order of preference.
    1. Startup from your original disk that came with your MacBook by inserting it, then choose restart and hold the c-key until the grey screen with the Apple logo appears. Choose your language. On the next screen ther will be a menu bar at the top. Choose Disk Utility from the Utilities menu, choose your startup drive and Repair Disk. If any repairs were necessary and done rerun Repair Disk until all is clear, then restart normally. If this doesn't work:
    2. Startup in safe mode by holding the shift key until the Apple logo appears. Then try the installation. If no success:
    3. disconnect all peripherals - printer, external drives, etc. Restart and try again.
    $. report back to this forum!
    Neville

  • Problem Installing NW2004 SP 8 and SP12

    Dear Forum,
    i'm getting really frustrated.
    This is i think now the 7th installation.
    5 of it with SP 12. I read every related thread in the forum.....
    I'm allways getting error messages. i read the all forum entries, but now i cant find a solution for my problem anymore.
    the first 4 attempts i did on an old installation with Win XP usind Drive D:.
    All System requirements are fullfilled. On the old installation i allways got an error in the Java installation.
    Now i reinstalled my system and i tried to install NW2004 SP 12 on Drive C:.
    The installation is allways stopping with 89 % and logfile C:\SAP\NSP\DVEBMGS00\work\sapstart.log and sapstart.trc are filled with pipe_gsoap_accept failed.
    The same problem i am getting now with SP 8 (installing from the ordered DVD).
    Services XServer, SAPNSP_00, SAPDB:  NSP are running and the logfiles are getting bigger and bigger filled only with pipe_gsoap_accept failed....
    my firewall is deactivated, DHCP server is available, Hostname doesnt exceed 13 characters, %WINDIR%\system32\drivers\etc\services does not include an entry for the ports 3200, 3600 and 8000.
    Does anybody have an idea? Searching for SAP Notes related to pipe_gsoap_accept failed did not bring any note....
    I cancelled the installation on SP now and the logfile contains the following:
    (May 12, 2008 1:00:11 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (May 12, 2008 1:00:11 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (May 12, 2008 1:05:19 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (May 12, 2008 1:05:19 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks
    Jens
    Edited by: Jens Hankammer on May 12, 2008 1:08 AM

    Hi,
    please refer to my first post.
    Thanks
    Jens

  • I cant install flash player on my razr i android 4.1.2 what is happen i buy the app and didnt work

    Well when i finally buy my new cell and get out from symbian os one off the first things i gonna do is install flash player for listen my music on last fm and see the movies from streaming but i am too disapoint cause i goo to google store and find a free app from flash this make me soo happy ok i download it when i see its only say the version i need to buy and its 5 euro i am a brazilian here is almost 16 R$ a big assalt for app but i know flash soo good and buyed it via paypal it send me to a download page i get it there but when i gonna install it, it say the app is not install, the pack seens to be corrupt, i see the forum i make my configuration for app from outside but even like this did not install someone can help me i am get crazy with it.

    Hey bro i just asked about a refound but they tell to contact the
    developers cause after 15 min later they cant reefound and other they say
    the app they send is free and i donwload it for free from google play and
    then from there i gef a pay pall link from 5 euro i hope to know what kind
    off app is this cause it is not a official cause is on google play how it
    could be there if this one are discontinued i am assalted:.? In a official
    web site from google or its a official link? I am lost hows i can
    responsability for this? Hope you can help me i know you are not the
    trouble maker but is the only direct aswer i have! Tks about it i was found
    about browser with flash moments ago but i did know about the bateries
    issues good alert hope you can help a litle more too know what happen too
    me and know how responsability for this
    Hope talk too you soon
    Em 21/12/2013 17:28, "Mike M" <[email protected]> escreveu:
        Re: i cant install flash player on my razr i android 4.1.2 what is
    happen i buy the app and didnt work  created by Mike M<http://forums.adobe.com/people/CFMcBlob>in *Installing
    Flash Player* - View the full discussion<http://forums.adobe.com/message/5950011#5950011

  • I cant install or uninstall my itunes. I get this error 'the feature you are trying to use is on a network resource that is unavilable' Now ive seen the solutions on here but im using windows 8.1. Ive tried all options so please can someone help?

    I cant install or uninstall my itunes. I get this error 'the feature you are trying to use is on a network resource that is unavilable' Now ive seen the solutions on here but im using windows 8.1 and none of them work for me. Ive tried all options so please can someone help?

    That doesnt work for me. I removed itunes through the windows cleaner method as shown in other posts and re-installed itunes. Now im getting this error
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 126)
    Also my Microsoft office has stopped working after i deleted Itunes which is really strange.
    Can somebody provide me a solution please....

  • I updated to ios7 on my iphone 4 and now cant install apps and one app says waiting for 2 days now. Also it started ading apps from my wife's phone onto my phone even though we have separate apple ids.

    I updated to ios7 on my iphone 4 and now cant install apps and one app says waiting for 2 days now. Also it started ading apps from my wife's phone onto my phone even though we have separate apple ids.

    We do not share an apple ID and her phone is now logged in with her account and I have since backed it up on itunes under her account as well. I have turned off automatic downloads on her phone but they still keep downloading. I delete one app and then another one just appears on the phone.

  • I cant install adobe master collection cs5 or cs6 in maverick 10.9.4

    i cant install adobe master collection cs5 or cs6 in maverick 10.9.4, i cant install, the instalation stop in 4% in adobehelp ... any idea?

    I can't get into the installation menu. The third CD does work correctly, i'm not sure about the second CD. Is it possible that the CD is broken? Like maybe there is one file missing or something I don't know.
    Date: Sun, 9 Oct 2011 02:21:36 -0600
    From: [email protected]
    To: [email protected]
    Subject: Cant install Adobe Master Collection cs5.5
        Re: Cant install Adobe Master Collection cs5.5
        created by Mylenium in Creative Suites Windows - View the full discussion
    Have you tried to install in English instead of Dutch? Did you check the various tips from the knowledge base? Can't see anything obvious here - it seems to correctly recognize everything but then still refuses to install... Mylenium
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3961325#3961325
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3961325#3961325. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Creative Suites Windows by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Error when installing NW2004S ABAP + Java

    Hi,
    I'm having a problem installing NW2004s ABAP + Java.  I receive the following during the create secure store phase.  Any help is appreciated.
    WARNING 2007-01-23 14:50:28
    Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/exception.jar:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/logging.jar:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar create -s GTT -f /sapmnt/GTT/global/security/data/SecStore.properties -k /sapmnt/GTT/global/security/data/SecStore.key -enc -p XXXXXX" finished with return code 1. Output: The java class is not found:  com.sap.engine.offline.OfflineToolStart
    ERROR 2007-01-23 14:50:28
    CJS-30050  Cannot create the secure store; see output of log file SecureStoreCreate.log: The java class is not found:  com.sap.engine.offline.OfflineToolStart.
    ERROR 2007-01-23 14:50:28
    FCO-00011  The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .

    Hi,
    - go to the install dir (/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install)
    - unpack the J2EEINSTALL.SAR via
    /sapmnt/FND/exe/SAPCAR -xvf /sapcd/java/J2EE_OSINDEP/J2EE-INST/J2EEINSTALL.SAR
    then retry. It works!

  • HT1926 cant install itunes on windows 7 64bit . cant run a required dll

    i cant install itunes on windows 7 64bit . when i run the setup and reach the status : "performing installation checks" , it said "there is a problem with this Windows Installer Package . A Dll required for this install to complete could not be run.v..v" what should i do now ?

    That's a bit rarer. It's a 1723 error message. (1721 and 1722 are more common.)
    Even though the following user tip is about slightly different errors (the 1721 and 1722), perhaps try it with your one too:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I ran a disk verify & disk repair on my macbook.. both said my system was fine. I keep getting the underlying task reported failure on exit when trying to do disk permission or repair permissions. Also get cant install files in "/applications error. Help

    m was fine. I keep getting the underlying task reported failure on exit when trying to do disk permission or repair permissions. Also get cant install files in "/applications error when ever trying to install a driver or update. Help

    Hi,
    Here's an article for that:
    http://support.apple.com/kb/ts1901

  • I cant install I tunes I keep getting the following message: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start system services."

    I cant install I tunes I keep getting the following message: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start system services." I have Windows 7 - can you tell me what is wrong?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Cant install windows 8 on macbook pro 13 inch mid2010

    Cant install windows 8 on macbook pro 13 inch mid2010 Mountain lion 10.8.3. When i insert the windows 8 CD and try to install it on bootcamp Version 5.0.2 it say "Windows 8 is not supported on this Mac, Boot Camp only supports installing Windows 7 on this Mac. Please insert a DVD which contains a full version of Windows 7." i saw other topics using same mac and they installed it.
    Please need help

    Your computer is not supported for Windows 8. Read the System Requirements here http://support.apple.com/kb/HT5634. In case you missed the table of supported systems I'll repeat it below. Please note that your computer is listed as not supported.
    Mac model
    Windows 8, 64-bit
    Windows 7, 64-bit
    Windows 7, 32-bit
    Windows Vista, 64-bit
    Windows Vista, 32-bit
    Windows XP, 32-bit
    MacBook Pro (Retina, 13-inch, Late 2012)
    5
    5
    MacBook Pro (Retina, Mid 2012)
    5
    5
    4
    MacBook Pro (13-inch, Mid 2012)
    5
    5
    4
    MacBook Pro (15-inch, Mid 2012)
    5
    5
    4
    MacBook Pro (17-inch, Late 2011)
    5
    5
    4
    MacBook Pro (17-inch, Early 2011)
    5
    5
    4
    MacBook Pro (15-inch, Late 2011)
    5
    5
    4
    MacBook Pro (15-inch, Early 2011)
    5
    5
    4
    MacBook Pro (13-inch, Late 2011)
    5
    5
    4
    MacBook Pro (13-inch, Early 2011)
    5
    5
    4
    MacBook Pro (13-inch, Mid 2010)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, Mid 2010)
    5
    5
    4
    4
    4
    4
    MacBook Pro (17-inch, Mid 2010)
    5
    5
    4
    4
    4
    4
    MacBook Pro (13-inch, Mid 2009)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, 2.53 GHz, Mid 2009)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, Mid 2009)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, Mid 2009)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, Early 2009)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, Late 2008)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, Late 2008)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, Early 2008)
    4
    4
    4
    4
    4
    MacBook Pro (15-inch, Early 2008)
    4
    4
    4
    4
    4
    MacBook Pro (17-inch, 2.4 GHz)
    4
    4
    4
    MacBook Pro (15-inch, 2.4/2.2GHz)
    4
    4
    4
    MacBook Pro (15-inch, Core 2 Duo)
    4
    4
    MacBook Pro (17-inch, Core 2 Duo)
    4
    4
    MacBook Pro (17-inch)
    4
    4
    MacBook Pro (15-inch, Glossy)
    4
    4

  • Cant install Windows 7 on MacBook Pro running snow leopard.

    I just got a shiny new Macbook Pro and i tried to install Windows 7. I partitioned the drive using Boot Camp assistant and proceeded to install Windows 7. Windows 7 Installation started and then it said it cant find device drivers for CD/DVD drives. Since my Windows 7 disk was stuck inside the drive at this point with no way to eject it, i took the Leopard installation disk and connected it through a external USB DVD drive. Then was able to browse the DVD and look at the Bootcamp drivers. But pointing the windows installer to all the directories still came up with "No device drivers found". Though, my leopard installation disc has a folder called x64 drivers etc... Any suggestions ?
    Thanks.

    1) BootCamp .rtf at root of Leopard disk:
    Double-click setup.exe, in the root level of this disc, to install the following:
    • Boot Camp drivers, which allow you to use your Mac-specific hardware with Windows, including your Apple keyboard, mouse, trackpad, and built-in iSight camera. For more information on Boot Camp, see <http://www.apple.com/bootcamp>.
    • Remote Install Mac OS X, which allows MacBook Air users on your local network to install Mac OS X using a Mac OS X installation disc in your computer's optical drive. For more information, refer to the MacBook Air User's Guide.
    • DVD or CD Sharing, which allows MacBook Air users on your local network to use your computer's optical drive. For more information, refer to the MacBook Air User's Guide.
    If you can't find the MacBook Air User's Guide, download it from <http://www.support.apple.com/manuals>.
    For more information on installing Boot Camp, restart your Mac in Mac OS X, open Boot Camp Assistant (in the Utilities folder in the Applications folder), and click Print Installation & Setup Guide. 
    2) You can eject without having right click by clicking desktop Computer icon which opens Windows explorer and a view of drives C:, E;(likely your cd/dvd.) if you highlight this with mouse cursor, you can Eject from column above drive icon.
    Using Windows Explorer, In the Boot Camp Folder on the Leopard disk is Setup.exe Running this should install Bcamp & drivers for you.
    For me autorun at leopard disk insert has 3 icons to select from; for boot camp installation is third or one on the bottom. Maybe you don't see it due to screen resolution setting.

Maybe you are looking for