I cant join my wifi
my ipod touch (5 Gen on IOS 7.0.4 says "Unable to join WIFI". And when i click on the info for the wifi no information is displayed(Settings>Wifi>Network name).If any body know how to fix this please help
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
Cant join home WiFi after upgrading software
4s iPhone. Upgraded to the new software 06. At first I could acess my home wifi but now, it will not connect. Tried "Forget this Network, Renewed Lease, turned off phone and restarted...nothing. As I said for the last four or five days, I connected fine however, not any longer. My wife's phone connects with no problem. any suggestons?
Power cycle the router.
-
I need help I cant connect on wifi just "unable to join the network"
I have problem to my WiFi connection
I cant connect on WiFi home
and i have MSG unable to join the network
but my Iphone this is old iPhone 3
I need help how can I fix it and i don't know if my phone or the router the problem.
Pls help give me a easy answer and how i solve it.Hello, thanks for your answer, I try that reset, nothing change but my WiFi router when I off it my WiFi it is back after a minute my WiFi it doesn't work again. I think my router WiFi is the problem because I try everything apple community they suggestion still not working.
-
HT4623 why cant i join my wifi at home?
Why cant i join my wifi at home?
Tried the hard reboot earlier today. Just tried the airplane/DoNotDisturb combo. That did work. I was able to reconnect to my wi-fi. Now 2nd problem. My wife can not send imessage to me. I thought it was because I was not connected to wi-fi. She has iphone 4(not on ios7). I have iphone5(ios7.0.3). When selecting my phone# to txt to me, it shows as "green", not "blue" which would send as imessage instead of SMS. I have a work phone which has SMS texting turned off due to company policy. I can send her txt message. He txt returns as "undelivered".
I also tested the imessage by sending a txt to my apple ID. That seemed to work. So, I don't understand why txt to my phone # do not work but txt to my apple ID is working. Any thoughts on this? -
Macbook ver 10.6.8 after update 10.6.8 combo cannot join open wifi anymore
I am using Macbook ver 10.6.8 after update 10.6.8 combo i cannot join open wifi anymore.it shows me no internet connection.in fact before this i can acces any open wifi smoothly.it makes me annoyed and regret my action updating the combo.almost 3weeks i try to find the solution by read any suggestion from community but it makes me frustrated. for sure i refuse to send away my macbook to technician because what i knew they also take solution from here.i state here my macbook details :
Model Name: MacBook
Model Identifier: MacBook3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MB31.008E.B02
SMC Version (system): 1.24f3
Serial Number (system): W8744400Z63
Hardware UUID: 6172E4C5-C120-5C8A-9B2E-430B3D42C912
Sudden Motion Sensor:
State: Enabled
this the details my current network:
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 169.254.70.222
IPv4:
Addresses: 169.254.70.222
Configuration Method: DHCP
Interface Name: en1
Subnet Masks: 255.255.0.0
IPv6:
Configuration Method: Automatic
Ethernet:
MAC Address: 00:1d:4f:fc:c2:34
Media Options:
Media Subtype: Auto Select
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Service Order: 2
this is the open wifi i always acces smoothly before i update the combo:
Software Versions:
Menu Extra: 6.2.2 (622.2)
configd plug-in: 6.2.5 (625.6)
System Profiler: 6.0.1 (601.1)
Network Preference: 6.2.2 (622.2)
AirPort Utility: 5.6.1 (561.3)
IO80211 Family: 3.2 (320.1)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x88)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.42.4)
Locale: APAC
Country Code: MY
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Connected
Current Network Information:
TM WiFi:
PHY Mode: 802.11g
BSSID: 0:19:be:80:20:1a
Channel: 1
Country Code: MY
Network Type: Infrastructure
Security: None
Signal / Noise: -77 dBm / -94 dBm
Transmit Rate: 36
Other Local Wireless Networks:
TM WiFi:
PHY Mode: 802.11g
BSSID: 0:19:be:80:21:96
Channel: 6
Network Type: Infrastructure
Security: None
Signal / Noise: -78 dBm / -99 dBm
Location (8/1/12 8:22 AM):<<<<<<<<<-------------------------At this time i can acces this open wifi with auto-login
Active Location: No
Services:
Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:1b:63:a6:2e:44
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:1d:4f:ff:fe:72:00:d4
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:1d:4f:fc:c2:34
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
DNS:
Search Domains: , 94C723E0-B495-45CF-8ACE-279AF0F2D687
Server Addresses:
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
IEEE80211:
Join Mode: Automatic
JoinModeFallback: Prompt
PreferredNetworks:
SecurityType: Open
SSID_STR: TM WiFi
Unique Network ID: 94C723E0-B495-45CF-8ACE-279AF0F2D687
after i update the combo:
and the page which the open wifi load automatically did not appear as before.
if the update affect the wifi,cant i just downgrade and remove the annoyed combo?any expertise r welcome to give great solution..plzz!!!need your help!!!!cant believe it nobody reply.. very dissapointed ..i bring my mac to experrt and he reset my mac to the original version 10.6.8 .. n seriously after it done.. the connection as i mentioned which annoyed me settled and it works like a charm.. when i try to check update my software ...it showned combined software for 10.6.8.. however i still afraid to update it.. i'm still in trauma...
-
i just updated my ipad to ios 8 but i cant connect to wifi network..its says my password is incorrect although i know my password is correct as successfully updated 2 iphones and connected to same wifi network
I had the same problem. I reset my network settings as iOS 8 on my iPad 3 seemed a bit slow. When I tried to reconnect to the wifi the correct password was not accepted immediately.
after retrying several times it did manage to join the network. The only observation I had was that I had a weak signal and an iPhone next to me at the time.
make sure you are close to the wifi signal away from any other wifi devices. -
My iPhone 4S has stopped receiving/sending iMessages, cannot send/load any pictures over whatsapp and cannot join the wifi in my house anymore.
Essentially all the things I use my phone for have now stopped working. I constantly have 3G connected (even though i dont want to use it, i want to connect to the wifi in my house) but still when I try to download/ send a picture over whatsapp it comes up with an error message saying the server is unverified, or something equally ridiculous.
I deleted the app so i could reinstall it (as if that would help), but the app store is started saying "unable to connect", despite 3G, so that bright idea died out pretty sharpish.
Whenever i try to turn on iMessage, it asks for my Apple ID password, which I know I've typed in correctly because I reset the **** thing about 4 times due to it apparently being "incorrect". Even so, it repeatedly asks for the password over and over as soon as I've entered it, saying it was "unable to connect" before a final "incorrect password" message pops up just to add an extra smack of annoyance.
I haven't changed a single setting on my iPhone whatsoever. It just suddenly started spiralling into what is now £28/month-worth of pure frustration.
I don't even have any music or photos on it as I had to free up 3.5GB of space on the **** thing to allow it to update, naively thinking that would solve the problem, but alas it did not.
I have seen a few questions posted like this one, usually just one of the problems I have, but I seem to have rounded up the whole bunch (lucky me). None of the previously posted questions have received any replies.
Can some please help me! Honestly, if i see another "unable to..." or "unverified source" pop up again I'll probably smash the thing against the side of my house.
Cheers.On your iPad, go to [Settings > General > Reset > Reset Network Settings] Once that is done, re-connect your iPad to your wifi network.
-
Cant join PC to domain and not able to send emails
Hi
I'm having a few issues with a SBS 2011 Standard server. To give you a setup overview
Server x1 (SBS 2011)
Workstations x6 (4 running Windows 7 Pro and 2 running Windows 8.1 Pro)
The server is used as domain controller and exchange. It doesn't host the web domain - emails are directed via a pop3 connector to exchange accounts
Main use for server is file sharing, domain control and exchange
The server and workstations connect into 8 way Ethernet switch
This switch is then connected in BT 2wire business hub
The LAN ran from 192.168.0.69 (server) to .70, .71 etc while BT hub was 192.168.0.253
OK now the problem.
Everything was setup and working fine until BT decided to block the IP from web. BT said to factory restart the hub which we did. This fixed the internet to hub but screwed up the LAN. The new hub IP was 192.168.1.254 so the LAN was moved from 192.168.0.x
to 192.168.1.x
The first issue I am having is that I cant join a new pc that was rebuilt to the network. I have tried joining via right clicking my computer and changing domain, but when I enter in the domain and admin password it says it cant find the domain?
I then tried the http://connect but that just loaded a blank page. I'm struggling as to how to connect this pc now. I tried to change the DNS on pc to the server LAN address but that didnt work either. I'm not sure if the domain controller is working or
if its another issue?ow.
Also on the pcs that are still connected, every time they login the mapped drives to the server dont open. the user has to try to open the drive and then enter in their username and password to open the drive. The drives are all shared correctly and this
is only happening now.
The 2nd issue I have is unclear as if its still a BT issue or not, but when a user tries to send an email the get an instant bounce back saying
COL004-MC1F51.hotmail.com gave this error: OU-002 (COL004-MC1F51) Unfortunately, messages from 86.XXX.92.XX weren't sent. Please contact your Internet service provider since
part of their network is on our block list.
This happens on a number of emails not just hotmail
When I checked that IP on the spam networks it had no record of it being blocked.the server has internet access ok and can receive emails fine, just not send them.
I dont know it both issues or connected or not.
would anyone have any ideas on what to try? first issue is getting this pc on the network. have been told that it needs all sorting for Monday morn, so any quick advice would be great.
thanks for any inputHi,
Could you please share the IP Address of the server ?
Make sure the server is set to Static IP Address. With one NIC card enabled. DNS IP should be pointing to the server IP itself.
On Client machine assign an IP address and make sure the DNS is set to Servers IP Address.
Once that is done , Try to ping the server.
Also ping connect from the client machine , Connect should show servers ip address.
Keep me posted.
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd -
I cant connect to WiFi on my iPod Touch 1G?
I have had an iPod Touch 1G for quite some time now, but I recently upgraded the iOS firmware to 3.1.3, and I just noticed that I cant connect to wifi! Nothing is grayed out, but it cannot find any connections. Ive tried resetting my router and wifi settings, but that diddnt seem to work either.
So it is not this problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Teh try:
Does the iPod connect to other networks? (noit clear if you have access to more than one)
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
How do I get a 1st generation time capsule to join a wifi network?
OK, I've searched the groups but no luck. Here's my situation;
I'd like to configure a 1st generation time capsule to join a wifi network ideally with a printer attached to the USB. My set up is an iMac running 10.9.3, Airport Utility 6.3.2 and a 1st Generation TC with the latest firmware (7.6.4). I'm trying to connect it to an ADSL Wifi Modem/Router. I know a cabled connection would give better performance but want a wifi only connection as the printer is in a different room.
I've disabled the network functions (bridge mode) but I can only see wireless options to Create a Wireless Network, Extend a Wireless Network or Off, not to Join. If I try to extend I get the option to add an SSID, security & passwords but it doesn't seem like parameters to join -the drop-down doesn't list available networks to join & manually entering the main wifi network and password doesn't work.
Is my desired config even possible?
DaveSomething.....a Mac or PC will need to have a 5.x version of AirPort Utility installed on the computer.
Perform a factory default reset on the Time Capsule by powering it off for a few minutes. Then, hold in the reset button first and keep holding for an additional 10-12 seconds while you simultaneously plug the power back into the Time Capsule. Release the reset button after the hold period and allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Open up AirPort Utility on the computer, select the Time Capsule and click Manual Setup
Click the Base Station tab below the row of icons to type in a device name and password that you want to use for the Time Capsule, set Time Zone, etc.
Click the Wireless tab next to the Base Station tab
Hold down the option or Alt key while you click on the Wireless Mode setting box
Select the Join a wireless network setting
Select the name of the wireless network
Enter the password for the wireless network
Verify the password
Click Update to save the settings
Note....everything here assumes that the router that provides the wireless network is using WPA2 Personal security, which is the default setting for the Time Capsule. -
hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining .is possible that to return to older version? if there is any solution share with me and i be very thankfulness of you.tanks againIt is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update -
hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining . if there is any solution share with me and i be very thankfulness of you.tanks againIt is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update -
I did the software update ios 7 and now i cant hardly get wifi and my calls are being dropped.
I did the software update ios 7 and now i cant hardly get wifi and my calls are being dropped.Can anyone help me?
I updated my ipad to the ios7.4 and my wifi connection just wouldn't work any longer.
-
I reset my network settings, and when I went to join my wifi network i typed in the correct password, but it will not let me join. Other iphones and devices can however....
Try rebooting the router
-
I cant turn on wifi on ipad mini please help??
Hi guys I cant turn on wifi on on my ipad ios 7 1.2 I try restore network and didn't work please help
I Don't know what you did in order to restore your network. I'm not sure what that means exactly. But take a look at this, if your WiFi settings are greyed out.
iOS: Wi-Fi settings grayed out or dim
Maybe you are looking for
-
Computer shuts down then starts right back up
So I'll be working on my iMac (got it in July 2005) and it's like it will suddenly go into sleep mode on it's own. The screen just goes dark! Ever time this happens I tap the space key and it starts right back up, exactly where I left off. This start
-
Hi I am working in CE 7.2 and I want to declare a method that returns ArrayList<String>. How is it done? regards Yuval Peery
-
Removing Flex Stack Configuration from a removed member
Hi all I'm pretty new to Felx Stack.I tried to stack 4 C2960-48TDL switches.All four switches were configured seperatley with different Managment IPs(192.168.172.11/12/13/14) before stacking.And The highest Up time switch became the master as expecte
-
I am having the following error when loading itunes AppName: itunes.exe AppVer: 10.5.0.142 ModName: ntdll.dll ModVer: 5.1.2600.6055 Offset: 0000120e In the brief occasions that it loads and does not immediately come up with this error, if I plug in a
-
Error in OPEN_FORM for document 6000000078
Hi Guys, I'm experiencing an error : Error in OPEN_FORM for document 6000000078. This form is an enhanced form for RFQ and an enhanced print program ZSAPFM06P. What would be the possible cause of this error and how could I avoid this error? Please gu