I cant load i tunes on my windows 8 64 bit computer

after sveral attempts cant load i tunes in windows 8 any help please

We might be able to help, but not without first knowing specifically what is occurring and why iTunes is not installing.
Are there any error messages?

Similar Messages

  • I have just transferred elements 11 to a new windows 7 64 bit computer using the original purchased disc. Organiser is working fine, but I cant get the Editor to open at all.

    I have just transferred elements 11 to a new windows 7 64 bit computer using the original purchased disc. Organiser is working fine and all my photos are there, but I cant get the Editor to open. It just says editor workspace is loading and then it eventually gives up.

    Try opening directly from your desktop, by passing the welcome screen.
    Go to Windows Explorer>C drive>Program Files (x86)>Adobe>Photoshop elements 11. Right click, then Send to>Desktop
    Double click on the shortcut and see it will open.

  • HT1926 Why won't i tunes start in Windows 7 64 bit?

    Why won't i tunes start in Windows 7 64 bit?

    Got it working, had to go to the start menu and do a search for "Apple Software Update" and update Quicktime - had an old version that wasn't getting updated. Itunes works without problem now.

  • Why am i having trouble updating itunes  on my windows 7 (64 bit) computer?

    Why am I having trouble updating itunes on my windows 7 (64 bit) computer?

    Doug
    Thanks for the update.
    nothing is getting installed, copied or otherwise loaded onto my computer....first the program starts to load, then it asks for my serial number, then it goes out and seems to check the serial number then it says it can't be installed then it erases everything it just spent 10 minutes loading.
    In view of the above and your prior descriptions, have you tried alternative installation files?
    If you want to give a look to that approach, please download and install the tryout files for Premiere Elements 9 from the following web site and then insert your purchased serial number into them during installation.
    With this route, you need to carefully carry out the web site's "Note: Very Important Instructions" in order to avoid an Access Denied message.
    Photoshop Elements 9 / Premiere Elements 9 Direct Download Links | ProDesignTools
    Back to my questions from post 3
    Are you getting any Shared Technologies error message any where in the installation process that is failing?
    If you follow the following path, do you find an OOBE Folder?
    Local Disk C
    Program Files (x86)
    Common Files Folder
    Adobe
    and in the Adobe Folder should be the OOBE Folder which you rename from OOBE to OLDOOBE to disable it.
    When you are forced into a roll back for whatever installation has taken place, do you ever see a message about Shared Technologies?
    And, whether or not the program installs to any extent, does your computer have the OOBE Folder? If so, then please rename it to disable it before
    you try for another 9 install.
    Looking forward to your results.
    ATR
    Add On....Please remind me....since you purchased Premiere Elements 9, have you ever installed and used it successfully on any computer?

  • How to enable JIT debugging on my Windows 7 (64 bit) computer? I keep getting different Errors popping up on my computer about debugging different programs and that JIT debugging must be enabled!

    How do I enable JIT debugging on my Windows 7 (64 bit) computer? I keep getting different Errors popping up on my computer and the latest one says when I attempted to watch a DVD video with VLC media player but this isn't the first error this week saying
    that JIT debugging must be enabled and I don't know how to do that : ( "Microsoft Visual C++  Runtime Library"  Assertion Failed! Program C:\Program Files (x86) VideoLAN\VLC\vlc.exe  File: vm.c
    Line: 1765
    Expression: pgcit != NULL
    For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts.
    (Press Retry to debug the application- JIT must be enabled)

    Hi Rhondavas77,
    To enable/disable Just-In-Time debugging
    On the Tools menu, click Options.
    In the Options dialog box, select the Debugging folder.
    In the Debugging folder, select the Just-In-Time page.
    In the Enable Just-In-Time debugging of these types of code box, select or clear the relevant program types:
    Managed, Native, or Script.
    To disable Just-In-Time debugging, once it has been enabled, you must be running with Administrator privileges. Enabling Just-In-Time debugging sets a registry key, and Administrator privileges are required to change that key.
    Click OK.
    More information is here.
    http://msdn.microsoft.com/en-us/library/k8kf6y2a(v=vs.85).aspx
    Best Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Has anyone got a solution for the inability to update or reinstall itunes 10.6.3 on a windows 7 64 bit computer

    I have been unable to update or reinstall Itunes to my windows 7 64 bit computer.  I have tried most of the suggestions to date to no avail.  My outcome is a dialog box that says itunes was not installed. . .  At one point, it created a situation where my CDDVD drive was disabled but a windows troubleshooter got that back working citing a "class filter driver problem" that it repaired.  Also, Itunes comes up and plays from the optical drive (and the hard drive) but will not write to the CD or refresh my podcast list.  Anyone?

    hi b Noir -
    Since you were so helpful to Michael - I'm wondering if you may have the insight/answers to help me?
    I asked this question yesterday but so far - radio silence.... How are things in NZ, you kiwi!? (Aussie - Canadian myself
    Cheers and thanks for any help.
    fruitc88
            Jul 24, 2012 8:52 PM    
    Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community,  I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 10.6.3.25
    QuickTime 7.7.2
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    VoiceOver Kit 1.4.2 (222093/222742)
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0043AC7C0368E428
    Current user is not an administrator.
    The current local date and time is 2012-07-24 23:43:08.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.6.3.25 (x64) is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    iPod nano (6th generation), Windows 7

  • I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

    I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

    For such situation, I'd suggest the following:
    1. Remove current installed office with the fix-it tool in
    KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
    2. Either download a trial version of Office 2013 from
    http://office.microsoft.com/, or from
    http://technet.microsoft.com/en-us/evalcenter/jj937170
    3. Reboot your computer in clean boot mode, and run setup again
    Max Meng
    TechNet Community Support

  • How do I share my P1102w printer between a Windows 7 (32-Bit) and a Windows XP (32-Bit) computer

    I added a Windows 7 (32-bit) computer to my home network and installed an x86 printer driver through HP's website. The printer works fine from my Windows 7 computer, but now I am denied access to this printer from my Windows XP (32-bit) computer. Any suggestions on what I need to do?

    And how is the printer connected??
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I operate a windows 8,  62 bit computer.  I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word.  It is not doing so. Is this a wrong order?

    I operate a windows 8,  62 bit computer.  I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word.  It is not doing so. Is this a wrong order?

    if you're trying to convert pdf files to word files, you want acrobat pro or acrobat standard, Buying guide | Adobe Acrobat XI Standard
    http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Adobe R/W from CS6 installed on a Windows 7 64 bit computer keeps crashing

    Adobe R/W from CS6 installed on a Windows 7 64 bit computer keeps crashing

    There isn't such a thing. If you are talking about the free Adobe Reader, you are at the right forum, but if your problem is with Adobe Acrobat Pro, you should post here:
    http://forums.adobe.com/community/acrobat
    In any case, I suggest that you explain what "crashing" means in your case, including any error messages.

  • Error on Creative Cloud Windows 7 64-bit computer

    We have Creative Cloud installed on a Windows 7 64-bit computer.  When we try to use Media Encoder we get an error message "The program Can't start because MSVCP110.dll is missing from your computer.  Try reinstalling the program to fix this problem."  We have to continually reinstall Adobe CC.  What needs to be done to fix this so we don't need to continually reinstall CC?

    I received a response to download Visual C++ but I've tried that before and we still have to reinstall Creative Cloud.  Any suggestions?

  • Do I have to give up Palm Desktop 4.2 with my new Windows 7 64-bit Computer?

    Just got a new Windows 7, 64-bit computer. I am completely dependent on my Palm Desktop 4.2 software and don't want to give it up. However, I was told by an online chat rep. that I needed a bluetooth connection to hot synch my Centro with my new computer. Ran out and bought it, but it seems that on Palm Desktop v. 4.2 there is no option to hot synch via bluetooth...obviously, the program is too old.
    Does this mean I have to "upgrade" to Palm Desktop 6.2? Yuk! This version stinks! 4.2 is the reason I'm on my 3rd Palm product. Is there a different calendar software that you can hot synch with a desktop calendar? Has anyone had any success with this?
    Any advice would be appreciated!

    No windows 7 64 bit USB driver, PALM is SO OVER.
    Sad I love my CENTRO on SPRINT.  I have 3 on my account and 2 7xx.  USB Bluetooth dongles are cheap but annoyingly flakey because of the crummy software that comes with them AND will they work with PTunes?  It didn't when I tried Bluetooth on Windows XP.
    At the END of the day, if PALM is not committed enough to put out a windows 7 64 bit USB driver how can I be committed to this phone.  Looks like Android is getting help from palm, although I don't want to deal with learning a new phone.
    If you find a good USB Bluetooth dongle device that works let us know here.
    By the way, this ANNOYING chat board says me first name is an OBSCENE word.  PALM is insulting their loyal customer base.  I'll see if the Android board will let me use my first name.  :-)
    Thanks,
    **bleep**

  • Anyone have a driver for the ImageClass D860 that works with a Windows 8 64 bit computer?

    Please help.  If anyone has or knows of a driver for the ImageClass D860 that works with a Windows 8 64 bit computer, please send it or the link to me at [MOD removed email address per FORUM GUIDELINES].     Thx.

    I am trying to do a wedding and now spending too much time searching the web for tutorials and reviews to try to figure out what is going on. There needs to be better detailed help.

  • IPod Nano vs Windows 7 64 bit computer

    I have an iPod Nano 6th Gen and a Windows 7 64 bit computer.  With the latest iTunes 64 bit software updated on my computer, when I sync my Nano, it will no longer one finger swipe (like my iPhone), or rotate, I have to double click on any item there is a line around (box) the item I click, and it takes two fingers to swipe.  I restored the Nano on a 32 bit computer and it works fine but my music is all on the 64 bit computer.  Is this a compatibility issue?  When I restore the Nano on my 64 bit computer it reverts to the "broken" mode.  My iPhone and other iPods sync fine with the Windows 7 64 bit computer.
    Thinking that it might be the software on my computer, I completely removed iTunes and all drivers and then reinstalled iTunes 64 bit.  Still have a problem with the Nano.  But, again, when I restore it with a 32 bit computer, it works fine.

    Yes, a huge difference. At present Muse makes a very large number of small reads of the .muse file during open and throughout working on the file. Due to the latency overhead for each individual read from a server, this makes working with a file on a server painfully slow.
    Planned changes to Muse should significantly improve this, but working directly on a file stored on a server will always be noticeably slower than working with the same file stored locally due the latency associated with each file access.

  • Adobe Acrobat Standard 9.3.1 loads pages very slowly with Windows XP 64 bit version

    Our company has purchased Dell Precision T3500 workstations with Intel XEON processor and 6 Gb of RAM. The operating system is Windows XP 64-bit version. The systems came with Adobe Acrobat Standard 9.3.1. Each one of these workstations load PDF files into Acrobat very slowly. Does anyone have a answer why?

    Quote
    Originally posted by Some1ne
    Here's a step-by-step description of how to install the RealTek RTL8169/8110 driver, as the process isn't quite as straightforward as it should be:
    1.  Download the Windows AMD64 Drivers available here:
    http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=16&Software=True
    2.  Extract the files in the archive to somewhere like c:\win64drivers\ethernet
    3.  Once inside Win XP 64, do the following:
    a.  Click Start -> Settings -> Control Panel -> System -> Hardware -> Device Manager
    b.  Go down to the "Other Devices" section (they'll have yellow ?'s)
    c.  Right click on the ethernet controller and click "Update Driver"
    d.  Click "Install from a list or specific location (Advanced)"
    e.  Click "Dont search.  I will choose the driver to install."
    f.  Double click the "Network Adapter" entry, and then click "Have Disk..."
    g.  Select the directory which you extracted the driver files to
    i.  You will get messages saying that Windows cannot verify that the driver matches your hardware, and that the driver is not WHQL certified.  Ignore these and click "Continue"/"Install Anyways" and your RealTek RTL8169/8110 ethernet adapter will spring to life
    after i have done this the pc just stops. and if i reboot it stops at the loading screen :/ can you tell me whats wrong i got a k8t neo serie card and windows 64 bit edition
    edit: i did it :D works now

Maybe you are looking for