I cant make a boot diskette with lan driver

hello
i am trying to make a boot diskette with lan driver for the 865 chipset and for the pt880 m/b
but i cant find the onboard lan driver for dos anywhere
i want the computer to connect to another and take a ghost image from it
i need the lan driver for dos
please help

This one works perfectly with my onboard Intel Gigabit LAN. I use it all the time to make back-up images across my network.

Similar Messages

How can I boot Cisco1841 with USB Drive instead of CF?

Hello
I need to boot Cisco1841 with USB Drive instead of Compact Flash but I don't know what should I do.
I heard I need to format USB Drive with FAT and need to save IOS on the USB Drive.
Before boot, Need to set config register ? I am not sure which parameter should I set config register in detail.
Please let me know if there is URL describing thease steps from the beginning.

http://www.cisco.com/en/US/prod/collateral/modules/ps6247/prod_qas0900aecd80232483.html
     Q. What sizes of USB Flash sticks are supported?
     A. USB Flash sticks are supported in 64, 128, and 256 MB sizes. No other sizes are supported.
     Q. Can I use any USB memory stick for this application?
     A. No. Only Cisco USB memory sticks are supported.
Q. Can I boot an image directly from the USB Flash module?
A. Yes. USB drivers have been added to rommon, starting with version 12.4(13r)
     Q. Can I format the USB Flash module on the router?
A. Yes. You can format the module on either a router or a PC. You must specify "FAT16 file system" as the file system for the PC format process to use.
If your setup satisfies above conditions you can get the router to boot up with the IOS on the USB flash
If you are in ROMMON mode, use 'dev' to find out the name of the USB Flash (should be usbflash0).
set BOOT=usbflash0:
If you are in the router,
boot system flash usbflash0:

Slow boot up with fire drives attached

Hi,
I'm having problems if it I try and boot up my iMac, with 2 firewire drives and a drobo, one of the firewire drives is daisychained... I think that's the right term... through the drobo.
It tends to slow the boot time, it can be as much as 5 minutes.
Any ideas?

Hi,
Okay pending on how you want to look at this, I've got some good news and bad.
Good... When I booted up with the firewire drive on it's own attached, it was fine.
Bad, obviously it's a problem with the drobo... i think it's time for me to have a word with them... ~sighs~
Thanks. I'll keep this open and let you know how it ends up.

Cant make a new password with out the security questions

need help in changing my password !

If you need help changing the security questions-answers, try contacting the Apple ID Security site from http://support.apple.com/kb/HT5699

New Mac Pro - won't boot up with SSD drives attached

I have a new Mac Pro. It came with the stock 1TB HD. I installed two OWC SSD drives in the two optical drive bays. I booted up and the MacPro saw the two new drives. I set up the two new drives into a RAID0 setup with Disk Utility which worked fine. Then I cloned the 'Macintosh HD' drive so that I could use the two new SSDs as my boot drive.
When I removed the stock 1TB drive the machine will not boot up. I am stuck on the gray startup screen and it never even makes it to the Apple logo.
Even worse, when I reconnect the stock 1TB drive the machine will still not boot up if either or both of the SSD drives are connected. When I remove the SSD drives the machine boots fine.
Very weird - must be some weird RAID stuff going on.
Any ideas?
David

Hi dschamis
Just out of interest, what application did you use to clone from your HDD to the OWC SSD?
I had the same problem, but I was using only one SSD, when I cloned from a VelociRaptor 300GB HDD to an OCZ Agility EX SSD in December 2009.
The SSD "bricked", and when I contacted OCZ they told me that they did not recommend cloning from a HDD to a SSD. In fact they definitely advised against doing so.
I had used SuperDuper to clone from the HDD to the SSD.
When I received the replacement SSD ( OCZ sent me their top of their range Vertex EX), I didn't take any chances, and I did a clean install of the Mac OS and all my applications.
Everything was 100% OK, and I have not had a single problem with the SSD since then, but I never clone to it or from it. I just use Time Machine to back up to a WD My Book SE II 2T external drive, but I do have the original 640GB Apple (WD) HDD as a backup/emergency system boot drive in an external enclosure.
I have just ordered, and received, an OWC MercuryExtreme Pro RE SSD, which I will be using as my system boot drive solely for my photography related applications, and I will use the Vertex EX for the remainder of my applications.
However, I am not even going to risk using SuperDuper to clone the OS or any of the applications from the Vertex EX to the OWC SSD, although OCZ said it was OK to clone from SSD to SSD, and I will do a clean install of the Mac OS and the photography related applications on the Mercury Extreme Pro RE SSD.
Hope all goes well when you receive your replacement SSD.
If in doubt do a clean install of the Mac OS!
Regards,
Bill

Msi Z87-GD65 Booting Failure With eSATA Drives

Hi Folks,
Before I go down the (probably ill-fated) Customer Service path I thought I'd address the forum here on a little problem I'm having with my Z87-GD65.
IN essence, if I have a hard drive connected to my eSATA port the PC won't boot. I'm using an ICYDOCK 4 bay external enclosure (MB561US-4SB if interested). If the drive itself is on but the HD trays are ejected then it boots. If any of the drives are secured then it'll hang at a post-BIOS/pre-Windows screen where all I get is a blinking cursor for about 30 seconds and then it disappears to a plain black screen. If the device is powered off then it boots.
I've checked the BIOS with one of the HDs running and it doesn't appear within my boot list - in fact, except for one selection in the bios allowing me to disable eSATA there really isn't much I can do there.
I've upgraded my BIOS to 1.30 from 1.00 and the process seems to move a bit further - now I get the oh-so-pretty ugly Windows logo and that's all.
When I do actually boot the PC with the ICYDOCK off then I'm able to get into Windows normally, and turn on the ICYDOCK. After a few seconds all 4 hard drives report in and everything's fine.
I've been using this ICYDOCK for about a year and a half, with 2 other motherboards (neither were an MSI) and i7 cores, and neither of them caused me any issues. I remember that neither of those boards had the port multiplier eSATA capability so I had to buy a controller card with that capability. I could probably dig that up and see if the problem remains.
In case you're wondering, if it helps, I built a Msi Z87-GD65/4770 i7 - based PC with 2 internal 2TB Hard Drives, and 16gb RAM. I already mentioned the ICYDOCK. I used LiveUpdate to install all the latest drivers & BIOS before uninstalling it.
I build & repair PCs for a living so I'm pretty familiar with what's going on with the system. I figure that there must be something happening between the BIOS and Windows "handoff" of the ICYDOCK, but I'm damned if I can figure out just what.

More information please. PSU, OS being used, etc..
Live Update is best uninstalled. Flash UEFI/BIOS the safer way;
https://forum-en.msi.com/index.php?topic=169827.0
Recommend to download drivers and utilities from the MSI Websites and install manually.
>> Posting Guide <<

Installing XP using boot camp with partitiion drive?

I recently re-installed Leopard on my mac, and i decided to partition the drive.
Then, when I went to install XP using boot camp it said that it only works with 1 partition!
Is there any way round this without re-partitioning my drive?
I also have an ext drive now so maybe I could install it there, but that would be slower.

I just tried to run the hardware diagnostic test, half way through, the screen started to flicker so much, I had to abort the test. Please help!

Macbook not booting up with hard drive in optical bay

I have a SSD in the main bay and have my stock Toshiba 500GB 5400RPM installed in the optical bay with a hard drive caddy. When I boot up I get stuck at the White Apple scrren with the spinning dotted wheel or it boots up to the desktop and my mouse and keyboard freezes. Has anyone else experienced this problem or have a resolution? I tried two separate hard drive caddys and two separate hard drive thinking these might be the problem with no luck. Please help I'm getting really frustrated with this problem and would love to start using the hard drive in the optical bay. Thanks in advance!

This is considered a "hardware hack" outside of Apple guidlines and unfortuntly not really addressed in this forum or by many members really.
However I can point you into the correct direction of Dave Merten (aka "Bmer) of the Mac Owners Support Group as he has done such a hardware hack and best can tell you how to fix your particular issue
http://macosg.com/
Good luck.

Help me make a boot disk

hi, i have tried all sorts of ways to make a boot disk with a working Disk warrior, i have tried bootcd( but doesnot work on 10.4) i have tried CLoneX, but it wont load Disk warrior, i have even created a disk image of my mac os X up grade disk and then put diskm warrior on it, (just drag and drop form the orginal disk image) , but itg wont load, at the moment, i am tring to use my mac os X install disk.....any tips would be great
i am trying to repair my catalog file , whihc apparently has an illegal name..... alos ii need to fix my 250gb hard drive that crashed, and now my computer wont even reconize,,,,,,,now, i have at my disposale aa 10gb hard drive and a 20 gib drive, i have installeed mac os x on the 10 gb, but it wont boot form it ( it is in a fire wire enclousre)...... my other 20 gb is crashed, and i cant mount it, in order to format it....... HElp plz
all3 haard drives are western digital,, and the enclousre is a A-Power.....here is a link to some info on the enclouure..... http://www.geeks.com/details.asp?invtid=AP35-C&cat=CAS
Help me plz
also any tools besides disk warrior would be a great help, because when the device is connected and i try to run diskwarrior, it just freezzes......

Hello,
I am following the video Alsoft recommends in order to create an emergency disk.
http://www.macworld.com/quicktime/webbungalow12-01.mov
It is very helpful. I only purchased Disk Warrior a few days ago.
I am trying to install from the download I received. My CD will arrive in the mail at some point
I can only get so far. As it is installing to the emergency disk it stops with an error message:
An error occurred while trying to complete the installation. Installation was canceled, leaving your dis untouched.
Any idea what am I doing wrong?????
Thank you

HT204347 Has anyone ever booted from an external drive? System 10X6+

Has anyonetried to boot computer with removable drives? or any body knows?
My super drive broke down. I replaced it with external. How do you boot from this drive. Pressing "C" is ineffective?
don't have another Mac, so Target Disk Mode is not an option. Any advice ? I paid 80.00 for the same problem the last time. I ran this progam bundled with the drive called DriveGenius to rid my hard drive of binarys (Intel and 64) localizations, duplicates within the system, and what I thought were two systems, a 10X6.8 and 10X63. When the .8 wasn't working right, and I couldn't fix it-or find an answer for it--I figured I would go back to the 10X6.3 But no. I changed it in the system preferences (only the dock responded to commands and the tab bar's secondary files. so I rebooted. Nothing but I blue screen. I know it doesn't have to be erased, like they did before. for $80.00 and waiting 4 days something they 'fixed' in 20 min?
Thanks for you comments and advice in advance.Thanks for listening. I'm using the PC I had before, and I'm wondering has anyone tried or heard of using PC to/from Mac? I have Drive Genius and it boots for both system. The CD?DVD drive is broken here too. so we're back to the 1 st question

I wonder... Can you use the carburator from your Grampa's wheels on your new car? "No way!", you'll say; it's a whole different ballgame. But you can still use the stereo, the speakers (if not busted) or even the GPS, right? Maybe the core of the old vehicle (engine & its management, transmission, chassis, suspension) can't be used in a modern car, but many of the accessories can. Same thing here: the newest Macs have the latest from Intel, which is a world apart from processors 2-3 generations ago. And the Operating System that talks directly to the hardware has to follow suit.
At First Start, the Setup Assistant did give you the option to migrate your stuff from the older computer. Were it a Mac, settings, files and compatible applications could have been transferred over (in many cases, even with their registrations or activation codes). Had it been a PC, only files and compatible settings could have likewise moved over. If that wasn't taken advantage of at the time, two options remain for getting the stuff over without too much hassle:
Run Migration Assistant and use that instead. Migrating user accounts and files contained in their Home directories can be tricky if they are named the same as those already on the new Mac, but apps and non-personal files (not in duplicated Home directories) can transfer fine.
Reinstall the OS to redo the First Start.
And FYI, a new Mac from last week will ONLY run the latest Mavericks.

Laptop won't boot in windows with lan enabled in BIOS

Hi,
Toshiba A200-AH3. Windows 7.
So at one point it stopped loading windows 7, it would load until this point (loading screen for windows 7). So, I reinstalled Windows 7 (once format). Twice. It still didn't work. So, somebody gave me the idea to disable everything in bios, which I did. And then it worked. So I went back and just enabled the 2nd CPU in bios and that's about it. A few days ago I needed to connect the lan and I went to bios and enabled lan. Guess what, it would stop at the loading screen just like before.
Safe mode does not work either.
With lan turned off in bios, I went to Toshiba.ca and installed the Realtek-Network-Driver6.189.1213.2006 for Windows Vista (as they say this should work on win7 too). Enabled lan and it still didn't boot windows.
What are my options?

I would need to make the Lan work.
You can obtain an ExpressCard for the LAN. Here are a few at NewEgg.
how do I flash the bios.
I'm assuming you have 32-bit Windows. This should work in Windows 7 as well.
   BIOS Update (Windows Installation) Toshiba Windows Vista 32bit, 1.80, 9/17/2007
   A200-PSAE0-PSAE1-180-WIN.exe
   BIOS update instructions
-Jerry

Can I Make a Leopard Boot disk with my Free Agent Desk 1.5TB External Hard Drive?

Can I Make a Leopard Boot disk with my Free Agent Desk 1.5TB External Hard Drive? Using my Power Mac G5 Dual 2.0Gig original computer?

Only if it is a FireWire interface. The G5's won't boot to a USB 2.0 drive.

Hi. I cant open my icloud account coz i forgotten my password and my icloud and apple i.d have different account and the worst is i just only make an icloud id with no email add....i cant activate my iphone 5 now because of that.what will i do?thanks

Hi. I cant open my icloud account coz i forgotten my password and my icloud and apple i.d have different account and the worst is i just only make an icloud id with no email add....i cant activate my iphone 5 now because of that.what will i do?thanks

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

HT201328 after clicking on ''reset all'' on my iphone4,it has refused to come on. All i see is a prompt on the screen asking me to connect to iTunes. I cant make any calls or do an6ything with the phone. Anone with any advice?

After clicking on ''reset all'' on my iphone4,it has refused to come on. All i see is a prompt on the screen asking me to connect to iTunes. I cant make any calls or do an6ything with the phone. Anone with any advice?

Hi Tonma,
Sounds like your device is in recovery mode. Follow the instructions in this article:
http://support.apple.com/kb/ht1808
Cheers,
GB

XSERVE G4 cant boot up with CD?

I got old "Xserve 1GHz DP/512 SDRAM/ 60GB HD/2XGIGE/VGA" - contacted tech support but its way out of support and tech told me to "hit the forums"
Here is the issue - Xserve loads up to login screen - however I don't have root non any other account on this box - but i need it for my work ASAP.
I followed 2 manuals from the site and many advices on how to start up Xserve with CD-rom - nothing worked so far.
This manual doesn't look like working http://manuals.info.apple.com/en/Xserve1.0.1_UserGuide.PDF
Powering Xserve holding serviceID button in the front, doesn't eject CD-tray.
All those blue lights seems to be blinking by themselves regardless of what i hold or push - Nightmare!
tried using root with pass of my serial number(also with first 8 char of my serial)
nothing - just STUCK on login screen.
Please help either get root or boot from CD(reinstall etc)
I'm trying to boot up from Mac OS X version 10.1 CD.

not so quick :((...
Tried to boot up with "T" hold - nothing, no reaction on my input - jumps straight to login screen. Keyboard works, here is combinations that i've tried
so far with no success :
pressing and holding C
pressing and holding N
pressing and holding D
pressing and holding Command-Shift-Option-Delete
pressing and holding T
pressing and holding Command-Option-P-R
pressing and holding Command-Option-O-F
pressing and holding Command-Option-D
I notice one thing, serviceID light goes off amber by itself, even when was previously off.
Never though resetting root will be that hard - done it dozens of time on macs - umount -u / passwd and done, but this nightmare already took my third working day. Should i just smash it and throw outside the window?
P.s
will clearing CMOS help in any way ? what are really my options if there looks like no keyboard input accepted on bootup process by mac?
Message was edited by: unsobill

I cant make a boot diskette with lan driver

Similar Messages

Maybe you are looking for