I cant open any pfd from explorer. i get the error message 0:104. HELP !
I cant open any PDF from internet explorer. I get the error message 0:104 . I already reloaded adobe and I already did the fix adobe. Help
Hi Catherine ,
I would like to know which version of Acrobat are you using?
If it is Acrobat 10 , go to the "General" settings, and uncheck "Activate the protected mode at start up ".
If this does not work ,try uninstalling Acrobat once with the help of Cleaner Tool .
Here is the link for the same.
http://labs.adobe.com/downloads/acrobatcleaner.html
The try re installing it .Make sure all the third part software are disabled while you install Acrobat .
Try these solutions and see if that works for you.
Regards
Sukrit Dhingra
Similar Messages
-
Can't open web addresses from an email-get an ERROR message saying-no application could be found
Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!
-
i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?
Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD. -
I have CS4 installed on two computers however none of the applications will now open on one machine and I get the error message 150:30
Your best bet is probably to start over by cleaning off the old software with the Adobe Cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then reinstall from your original media, or download it here:
http://www.adobe.com/downloads/other-downloads.edu.html -
Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file. You may no have th appropriate permissions to access the item. I have changed the permissions to everyone and it doesn't work
Any suggestions please?
-
Hi guys,
I need some everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.
Kind regards
IanOne correction, from the icloud I was not able to listed to the entire song. So when you purchased the song if it wasn't downloaded to your library, chances are you have lost your opportunity to listen to it.
-
I cant use my iphone because I'm getting the error message that I must connect to Itunes and when I do it says the only option I have is to restore my phone.
Try using RecBoot or TinyUmbrella to kick it out of Recovery mode.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
When i open a picture from photos, i get an error message
Hi please can any one help me , this problem has only just started when i open a picture from photos it disappears and i get a black screen with a clear circle and a ! in the middle , it happens on all of my pictures , please can any one help , thanks
Welcome to the Apple Discussions.
The only thing i have done was empty my all image folder in finder under the search for triangle
By empty do you mean move to trash? Messing with the contents of the iPhoto LIbrary package using the Finder is tantamount to committing the cardinal sin of iPhoto.
Open the iPhoto Library package like this. and look inside the Originals folder and its subfolders to see if the full sized image files are still there. If so you'll be able to create a new library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
If there are no full sized files inside the Originals folder and you don't know where they are on the hard drive, i.e. you deleted them via the Finder, you'll need to use a file recovery program like SubrosaSoft FileSalvage to recover those image files.
Please expand on exactly what you did using the search. -
This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
EDIT: [Redacted]
EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
second time, it installed fine.
I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
That is when I tried another install of Server 2008 and received this error message about an answer file.
I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
answer file.
I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!Hi,
As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
I asked "OEM or retail" because of this known issue:
"Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2425962
An answer file may already contain in the disc which causes the issue.
If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
If you have any feedback on our support, please send to [email protected] -
Photos that ive previously saved and opened on numerous occasion will no longer open. i receive error message telling me that the file is not supported or has been damaged. Help.
Hi cragside,
Which Adobe application are you using, and what format are those photo files? I'd love to help, but need a bit more information to go on.
I look forward to hearing back from you. When you reply, please let us know what Adobe application you're using (name and version), what types of files you're trying to open, and whether you're on Mac OS or Windows. It'll also be helpful to know whether any files open for you, or if the problem is specific to certain files.
Best,
Sara -
please help I downloaded Digital Editions to use e-book and when I got to open I get an error message
It says file could not be opened because it was either not a supported type or it was damaged. I have already had the file resent and in talking to the American Medical Association (purchased from their site) it appears when I go to open the file it is in Adobe Reader and I do not see an option to move it to Adobe Digital Editions,
Kathy Harlan
<mailto:[email protected]> [email protected]
Cell: 214-850-6427 -
I have been trying to email pictures from Iphoto, but it tells me that the email server doesn't recognize the username/password combination. How do I go about changing this?
no problem if you don't like Mail - I do and most iPhoto users do not relealise that with '11 this changed and is easly moved back
Oh, I like it - I just don't like it when the built-in iPhoto mailer does not work, for it should work. I like to use both - Mail and iPhoto. To have both, I have set iPhoto as mailer, and when I want to use Mail.app, I simply drag the photos from iPhoto to the Mail icon in the Dock. -
i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry. -
Cant's connect my Google and Yahoo calendar's. I am getting the Error message :A secure connection could't be established". Any recommendations on how to fix it? iMac/Mavericks
This article has a link for more information on finding your profile directory: [[Fix the "Could not initialize the application's security component" error message]]. On Windows 7, you can try this (either in a Windows Explorer window address bar or from the start menu search box):
%APPDATA%\Mozilla\Firefox\Profiles
You may see one folder in there and that's the one you want. If you see more than one, look for the one with the most recently modified files. -
I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?
Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Maybe you are looking for
-
Please help with Motion Crashes.
Hello Mac People: I recently purchased a new MacBook Pro and I was excited to have a faster machine to edit video on than my several years old iMac with less memory, older graphics card etc. But, alas, my new machine keeps repeatedly crashing on a Mo
-
Hotspot click for only some rows in ALV grid for a particular column ?
Hi there, In ALV grid, we can make Hotspot enable for all rows in a specified column by specifying in the fieldcatalog with Hotspot attribute set as true. But I want to enable Hotspot only for certain rows in the particular column. I tried wi
-
I am using an apple TV to show a slide show which is sent via WiFi from a mini computer. The slide show repeats for a few hours and then stops and shows "no signal". What's going on- and how do I get the show to cycle indefinitely? (I have set the
-
How to deleted warning this accessory is not optimized for this iPhone
How to deleted warning "this accessory is not optimized for this phone"
-
It reads exactly like this: "Are you sure you want to reset the printing system? This will delete all of your existing printer queues and all pending print jobs." Who would expect this will delete all the installed printers?? Apple should really chan