I cant open my ipad , the logo charger appears and an arrow pointing to itunes
Hi Somebody help me on this, I cant open my Ipad. The Itunes logo appears with the charger logo pointing to itunes. Please help, thanks
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Similar Messages
-
When I tapped on the ios 7.0.3 update, my screen went blank then an itunes app appeared centre page with a charge lead and an arrow pointing to the itunes app. When I switch it off and on again it just back to the same screen. been like this for 6 days now. Can anyone help?
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
NOTE:
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download -
my iphone 3 when turned on shows a picture of the jack and an arrow pointing to Itunes. I can't get it off this screen. help!
Do what you are being told. Plug the phone into a computer running iTunes and restore the phone.
-
Trying to down the latest update to my iphone 4s but my phone is now frozen with a picture of a USB cable visible and an arrow pointing to itunes. This remain whether my phone is connected to itunes or not. Any help please?
Hi d_diotte,
Thanks for using Apple Support Communities. If you're unable to update your iPhone and keep seeing the "Connect to iTunes" image, this article has some steps you can try:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Ari -
When I opened my ipad cover the keyboard was up and locked so no other screen is accessible. It was not up when I closed it earlier. How do I get the keyboard unlocked and down?
You could press the keyboard down button (shown bellow), or hold it if its not going down. OR Hold the power button for about 8 seconds until it asks you if you want to reset (slide to unlock). OR switch the little switch located on the side of your ipad (shown Below)
-
i pad wont start up
Hey stevesutton,
It sounds like you're seeing an image like this:
If that's the case, follow the steps in this link to resolve the issue:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Welcome to Apple Support Communities!
Have a good one,
Delgadoh -
can antone please help me.
Hi there
Press ON/OFF button by 5 seconds;
(when monitor goes off) press by 10 seconds the ON/OFF + HOME (10 sec)
Then ONLY HOME BUTTON (10 sec).
......wai wai wai wait.....and It recovers.....
Best compliments
Tiago Cunha
Portugal -
please help, thanks.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
can someone help with the new software update? It has my phone froze
http://support.apple.com/kb/HT1808
-
When I try to turn on my ipad, all I get is a picture of an USB cord with anrrow pointing to an itunes icon. How can I fix this? pls help
Getting started
http://support.apple.com/kb/HT4053 -
i cant open my ipad 2 i upgrade it and he requst id icloud and pass and it still unlock
If you don't know the iCloud/Apple ID and password, you are stuck. You cannot bypass this and active the iPad without them. If you bought the iPad from someone else you will need to contact them and ask them to remove the device from iCloud and erase the device for you so that you can activate it.
The previous owner needs to follow the instructions here in order to erase the device.
http://support.apple.com/kb/ht5661 -
I've plugged it into the computer and nothing happens...nothing changes....the screen still has a pic of the computer charging cord with an arrow pointing to a music symbol at the top of the screen. I can't seem to get it to do anything.
For how to restore see:
iTunes: Restoring iOS software
Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
i updated my ipad in ios 6Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off. -
My ipod touch showing that it is. Charging the syncing symbol appears next to the device in itunes but i cant open or see the content of my device since it goes on sycing....btw i hav latest itunes
michaelfromstockton on tees wrote:
I've found an easier way, just go to settings>general>usage>music. Then swipe it and press delete, i think this deletes the database described above, then re-sync, this worked for me anyway. Good luck, you need it with Apple software.
I don't have a large library of music on my iPhone 4s since I've only had it since Oct 2012, but since the update to iTunes 11 in early December, my album artwork has been all messed up. Everytime I would try to add new music, it would assign the wrong album artwork to anything new coming in. And in addition to that, it would also mess up album artwork of music already on my phone. Everything looked correct in iTunes, but on my phone, not so much. After trying to unsynch, then synching again, my frustration level was at an all-time high. This problem seems to be everywhere online, but no concrete solution for everyone.
I finally came across your simple solution (at least for me because of my small inventory of music) of just deleting all the music through the settings, and then re-synching to add back my music. Now all of the album artwork is correct again. I'm almost afraid to add new music for fear the artwork will get mixed up all over again! I still think my issue is somehow connected to the iTunes 11 update because up until then I had no issues whatsoever. Anyway, thanks for an easy solution that worked for me. -
HT1414 dont know what to do. i cant open my ipad. it just turned off. help me pls. thank you
dont know what to do. i cant open my ipad. it just turned off. help me pls
If you are sure that the battery didn't die on you and that the battery has some power left in it, reboot the iPad and see if it starts up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Maybe you are looking for
-
Leopard re installation on new hard drive issue.
Hello, Recently my girlfriend and myself took a vacation so we had to bring the Macbook of hers... Unfortunately the laptop fell out of the luggage and landed FLAT on the bottom. Looking at the Macbook we got the dreaded gray question mark of death
-
Problem configuring WSN network in MAX
HI, I am facing this problem suddenly in using my NI 9792 gateway .The module is getting detected in MAX It is that I am not able to find the Node option under devices and interfaces of the gateway in MAX. I am using LV2010 and NI WSN 1.2. Correspo
-
Printing files stored on a NAS with an Officejet Pro 8600
Sorry if this has been asked before but if it has I can't find it Is there an app which will allow me to print some commonly used forms which I have stored on my NAS? (A bit like the Google docs eStorage app but direct from my NAS ) Thanks
-
Updated iPod to 1.2 , now it tells 'use itunes to restore'. How ?
Hello, sorry my english. I have just updated my iPod nano from firmware 1.1.1 to 1.2 using latest iPod Updater 2006-06-28. It went ok. Then i entered iTunes 6.0.5 and made an eject. The iPod showed "OK to disconnect". I disconnected. But now when I t
-
How can I save the modulation I apply to an instrument during recording such that it remains during playback? For example, I apply modulation #8 during recording, but when I play the track back the modulation is not incorporated.