I cant open the iworks 9 in snow leapord os 10.6.8

i cant open the iworks 9 in snow leapord os 10.6.8.

Thanks Fruhulda,
I recently upgraded my ios from tiger (10.5.8) to snow leapord (10.6.8), owing to which my iworks9 had to be reinstalled. I had taken a back-up of iworks in my hard disk and once the new ios was installed, I transferred the file back to the mac. When I try to open pages, numbers or keynote I got a message saying that this programme cannot be opened because of a problem, pls contact apple.
Kindly suggest.
Just few minutes back I downloaded a iworks9 trial version since most of my files are in numbers, keynote and pages format and needed to access them urgently! I can access the numbers and pages files, but the keynote files cannot be opened. I still get the 'because of a problem' message.
Tc
Vikram

Similar Messages

YOU CANT OPEN THE APPLICATION --------- BECAUSE POWERPC APPLICATIONS ARE NO LONGER SUPPORTED.

Hello
My problem when start (game) i see this error YOU CANT OPEN THE APPLICATION --------- BECAUSE POWERPC APPLICATIONS ARE NO LONGER SUPPORTED.
mac book pro 2.2gh i7 Mountain Lion
Please help me

Power PC applications - which your game evidently is - are not supported by Mountain Lion (or Lion, for that matter). You either need to make a partition/disk which runs Snow Leopard and run your game from there. Or you need to update your game to be compatible with the current Mac OS.
charlie

HT1338 i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

I note this information from Wikipedia: "DVD Studio Pro was a high-end software tool published by Apple Inc. to allow users to create DVD masters to be sent out for replication at production houses. Its tight integration with other Apple applications allows users to take Final Cut Pro and Motion projects and render them into the DVD format without encoding to intermediary formats. This streamlines the production workflow and reduces overhead."
If that is your intent, finding a substitute program that will run on your Mac may not be as efficient. Others can advise you on alternatives, or you can post a new thread specifically with that question.
BTW: what Mac and what version of OS X?
If it is important to you to continue to use DVD Studio Pro, consider the option of installing Snow Leopard (with Rosetta) into Parallels on your Mac:
[click on image to enlarge]
Full Snow Leopard installation instructions are here.

When I try and open a word document I received the following message: "You cant open the application Microsoft Word because PoerPC applications are no longer supported". What is up with that?

When I try and open a word document I received the following message: "You cant open the application Microsoft Word because PoerPC applications are no longer supported". What is up with that?

Here is a post that I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

When I try to open the Iphoto it keeps on asking for the software update but when I click on the software update tab, it says that all updates are up to date. I still cant open the Iphoto, what should I do?

When I try to open the iphoto it keeps on asking for the software update, but when I click on the software update it says that all the software in the computer are up to date. I still cant open the iphoto, what should I do?

How old is your Mac? If it's very recent you need to update via the App Store
If you purchased at the App Store you need to update via the App Store
Otherwise you update via Softare Update
If you have moved iPhoto from the default location (i.e. into a Folder) then the updater won't find it. Move it back.
If you have renamed iPhoto, the updater won't find it. Change it back.
Regards
TD

You cant open the application " read before install itunes" because it is not supported on this architecture

what does this mean you cant open the application " read before install itunes" because it is not supported on this architecture

Where are you seeing this?
Which computer?
Which OS? iTunes comes preinstalled on all Macs.

I cant open the Guess site in Safari in my iPhone 4S. Message appears "Adobe Flash Player not supported".

I cant open the Guess site in Safari in my iPhone 4S. Message appears "Adobe Flash Player not supported". What can you suggest to solve this problem?

Flash player is not supported in iOS and probably soon no phone will.
Adobe kills Flash on smartphones to focus on apps | T3

HT4796 I just downloaded the Windows Migrator and tryed to open it. A window popped up saying "YOU CANT OPEN THE APPLICATION BECAUSE MICROSOFT APPLICATIONS ARE NOT SUPPORTED ON OS X". How do i transfer my file?

I just downloaded the Windows Migrator and tryed to open it. A window popped up saying "YOU CANT OPEN THE APPLICATION BECAUSE MICROSOFT APPLICATIONS ARE NOT SUPPORTED ON OS X". How do i transfer my files?

An .exe application is compiled for Windows. It will not run on a different OS. If you need to run this program, then you will have to install Windows on your Mac. Either as a separate bootable partition, or running in a virtual machine, such as Parallels or VMWare.

Safari cant open the page because its not connected to the internet

iPhone 3g connected to my wifi at home just fine for first 3 weeks, now wont connect and getting error message "safari cant open the page because its not connected to the internet" Signal strength is excellent, other wireless devices are connecting fine.
Ive reset network settings, modem and router but still getting error messages.

Hey man, I have this same problem and it all started with 2.0.2. This is the worst update Apple could have given us. I love Apple products, and I loved my iPhone 3G until this update. I think 2.0.2 has caused more bugs than it claims to have fixed. Safari doesn't work anymore (3G or WI-FI) and I can barely pick up 3G unless I'm outside or near a window (whereas before 2.0.2 I could get 3G even in the underground tunnels of my university campus). My iPhone is no fun anymore and actually pointless, I might as well revert back to my original RAZR v.3, at least that thing worked as it was designed to.
I hope Apple issues a new update that just cancels out 2.0.2 and reverts back to 2.0.1....that one worked absolutely fine (at least I got no crashes of any kind with that version).

I have a subsription to the cloud indesign and I cant open the application without a serial number?

I have a subsription to the cloud indesign and I cant open the application without a serial number?

http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
-has a link about why you are prompted to enter a serial number

HELP! Safari says cant open the page, too many redirects occurred trying to open (web address) when trying to access research paper sites - doesnt happen elsewhere

Hi there,
Ive been trying to open research articles through google scholar, when i click to open the page it doesnt load and comes up with Safari cant open the page, too many redirect occured trying to open (then the web address). This might occur if you open a page that is redirected to open another page which is then redirected to open the original page.
This also happens when i access the databases through my universitys library web page - and it still wont let me load even the actual webpage let along particular article.
This is happening on my ipad as well - but this is not happening on my iphone or on my other lap top which is not an APPLE.
i know its not my internet as i used the same internet on the other comp and i also used it as wifi and without out wifi on my iphone.
PLEASE HELP! i need to study!!
thanks

Safari 6
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Remove website data.
Safari > Preferences > Privacy > "Remove All Website Data".
http://support.apple.com/kb/TS3320

Adobe cant open the pdf it may be damaged or corrupted this happens for all pdf documents

Adobe cant open the pdf it may be damaged or corrupted this happens for all pdf documents
Steps to resolve
Uninstalled and restarted the server
Installed agan same error
Uninstalled and restarted the server
- Installed version 9.5
- Same error

Is this happening for brand new files downloaded from the internet?
Or only for existing folders of PDFs on the server?
Has the modification date changed on the PDFs?

Cant open the database

hi
i ve two server... test1 and test2
i have shutdown instance and copy all files redo, control , and init from TEST1 TO TEST2 at same location.
now i cant up the database..
i tried to backup controlfile to trace of TEST1 and tried to open database on TEST2
but it i cant open the db
here is some example ...
SQL> CREATE CONTROLFILE REUSE DATABASE "AMD751" RESETLOGS NOARCHIVELOG
2 MAXLOGFILES 20
3 MAXLOGMEMBERS 5
4 MAXDATAFILES 999
5 MAXINSTANCES 1
MAXLOGHISTORY 292
6 7 LOGFILE
8 GROUP 1 (
9 '/oravl04/oradata/amd751/rdl/redo01a.log',
10 '/oravl03/oradata/amd751/rdl/redo01b.log'
11 ) SIZE 50M,
12 GROUP 2 (
13 '/oravl04/oradata/amd751/rdl/redo02a.log',
14 '/oravl03/oradata/amd751/rdl/redo02b.log'
15 ) SIZE 50M,
16 GROUP 3 (
'/oravl04/oradata/amd751/rdl/redo03a.log',
17 18 '/oravl03/oradata/amd751/rdl/redo03b.log'
19 ) SIZE 50M
-- STANDBY LOGFILE
20 21 DATAFILE
22 '/oravl04/oradata/amd751/dfl/system01.dbf',
23 '/oravl04/oradata/amd751/dfl/undotbs01.dbf',
24 '/oravl04/oradata/amd751/dfl/sysaux01.dbf',
25 '/oravl04/oradata/amd751/dfl/users01.dbf'
26 CHARACTER SET AL32UTF8
27 ;
-- Commands to re-create incarnation table
-- Below log names MUST be changed to existing filenames on
-- disk. Any one log file from each branch can be used to
-- re-create incarnation records.
-- Recovery is required if any of the datafiles are restored backups,
-- or if the last shutdown was not normal or immediate.
RECOVER DATABASE USING BACKUP CONTROLFILE
-- Database can now be opened zeroing the online logs.
ALTER DATABASE OPEN RESETLOGS;
Control file created.
SQL> SQL> SQL> SQL> SQL> SQL> SQL> ORA-00279: change 2797632 generated at 09/22/
2009 12:36:30 needed for thread 1
ORA-00289: suggestion : /oravl01/oracle/10.2.0.1/dbs/arch1_1_698243790.dbf
ORA-00280: change 2797632 for thread 1 is in sequence #1
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log '--'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00308: cannot open archived log 'ALTER'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00308: cannot open archived log
'/oravl01/oracle/10.2.0.1/dbs/arch1_1_698243790.dbf'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-00308: cannot open archived log
'/oravl01/oracle/10.2.0.1/dbs/arch1_1_698243790.dbf'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
SQL> select open_mode from v$database;
OPEN_MODE
MOUNTED
SQL> alter database noarchive log;
alter database noarchive log
ERROR at line 1:
ORA-02231: missing or invalid option to ALTER DATABASE
SQL> alter database noarchivelog;
Database altered.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/oravl04/oradata/amd751/dfl/system01.dbf'
============================================
============================================
specially
'/oravl01/oracle/10.2.0.1/dbs/arch1_1_698243790.dbf' this file don exist on test1 or test2
any idea guys how to open db in this situations.....
Edited by: jignesh kankrecha on Sep 22, 2009 2:24 AM

SQL> connect / as sysdba
Connected to an idle instance.
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 687865856 bytes
Fixed Size 1981192 bytes
Variable Size 369100024 bytes
Database Buffers 314572800 bytes
Redo Buffers 2211840 bytes
SQL> CREATE CONTROLFILE REUSE DATABASE "AMD751" RESETLOGS NOARCHIVELOG
2 MAXLOGFILES 20
3 MAXLOGMEMBERS 5
4 MAXDATAFILES 999
5 MAXINSTANCES 1
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 (
9 '/oravl04/oradata/amd751/rdl/redo01a.log',
10 '/oravl03/oradata/amd751/rdl/redo01b.log'
) SIZE 50M,
GROUP 2 (
11 12 13 '/oravl04/oradata/amd751/rdl/redo02a.log',
14 '/oravl03/oradata/amd751/rdl/redo02b.log'
15 ) SIZE 50M,
16 GROUP 3 (
17 '/oravl04/oradata/amd751/rdl/redo03a.log',
18 '/oravl03/oradata/amd751/rdl/redo03b.log'
19 ) SIZE 50M
20 -- STANDBY LOGFILE
21 DATAFILE
22 '/oravl04/oradata/amd751/dfl/system01.dbf',
23 '/oravl04/oradata/amd751/dfl/undotbs01.dbf',
24 '/oravl04/oradata/amd751/dfl/sysaux01.dbf',
25 '/oravl04/oradata/amd751/dfl/users01.dbf'
26 CHARACTER SET AL32UTF8
27 ;
Control file created.
SQL> recover database until cancel;
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> RECOVER DATABASE USING BACKUP CONTROLFILE
ORA-00279: change 2797631 generated at 09/16/2009 18:13:06 needed for thread 1
ORA-00289: suggestion : /oravl01/oracle/10.2.0.1/dbs/arch1_70_681310441.dbf
ORA-00280: change 2797631 for thread 1 is in sequence #70
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL> ALTER DATABASE OPEN RESETLOGS;
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/oravl04/oradata/amd751/dfl/system01.dbf'
HI HEMANT THIS WAT I GOT AFTER RUNNING COMMANDS....
IS THERE ANY BAD SEQUENCE OF COMMANDS ????

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please help maybe its a firewall? Cheers Dave

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

I cant open the iworks 9 in snow leapord os 10.6.8

Similar Messages

Maybe you are looking for