I cant plug in 2 external hard disks in macbook ?

i cant plug in 2 external hard disks in macbook ?
i have one disk 500gb and ontherwith 160 gb and my macbook just let one of them or else ehen i plug on of, its ok but 2 just appear one !
why ? help me

Are the drives buss powered or external powered? If their buss powered that could be a problem to run both that way.

Similar Messages

Using ipod as external hard disk between macbook and PC

Hello
I have formatted my ipod mini to the mac, but I also have a PC at home which I want to transfer files to and from. Can the ipod still be used as an external hard disk between the macbook and the PC or is that not possible?
Thanks

If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. XPlay for instance gets good reviews and has the added functionality to let you copy your songs back to iTunes. MacDrive from the same company is not iPod specific it's for connecting any Mac formatted drives, if you want to use your iPod as a removable storage device it will work for that. You can get XPlay and MacDrive at these links:
XPlay 2
MacDrive
You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

Recommended external hard disks for macbook??

Hey all,
I am in need of an external hard disk for my macbook, preferably one of decent size cause I wil be traveling in Europe from Sept to Dec. I was looking at the smart disk one.... ideas on what ones to look at and where to buy?
thanks!
erik

I heartily recommend the Mercury drives from OWC. They are small, bus powered and very reliable due to the use of the Oxford chipset.
If you do not mind carrying around a power adapter, then the Mercury Elite Pro drives found HERE come pre-configured up to 500GB and if you want you can buy the enclosure only and add a 750GB drive.
That's a lot of storage!

Why cant I see my external hard disk on finder?

I disconnected mt external backup disk without ejecting it first, now it doesn't show in Finder when I connect it. Is there anything I can do?

On a Windows system, on boot up it would say something like -- this disk is damaged and must be repaired. With Mac it just doesn't mount. As Axeman1020 says, I'd try turning the disk off, waiting 30 seconds, turning it on, bringing up Disk Utility and seeing if the external disk is visible. if so, I'd try a repair, or at least a check.
It's rare that the disk would be unrepairable. If it was disconnected while writing during a power surge like a nearby lightning strike, there could be actual damage to the disk and then you might be in trouble. It could be worse, it could be the internal disk/SSD.

How to search files on a windows configured external hard disk on macbook air

I am trying to search files on my passport Ultra Western Digital, which is configured for windows and has read only permissions for my macbook air, i am unable to instant search results through finder or spotlight. Is there a way to search them?

Well, to clarify:
I want to find all user text files and mail messages on a Time Machine backup disk that contain the word "escalator".
By user files I mean those in
/Volumes/Time Machine Backups/Backups.backupdb/<username>iMac/*/Macintosh HD/Users
and subdirectories thereof.
I was trying to use the find command, but it was taking a very long time, so I aborted it. I then realized that most of the files have many hard links, and therefore will be searched many times. That, of course, is a great waste.
Is there some way to search each file only once?
Thanks.

I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

Cant write/edit data on my external hard disk! Help please!~~

Okay guys, currently, i'm using Tiger version 10.4.11. My problem is that i cant edit data or write data to any external hard disks, like the maxtor One Touch and so on. Only thing i can do is to extract the data from the disks. I have tried to write on multiple hard disks but in all my attempts i have failed. i've tried to edit my network settings, but no results.
So, i seek help from anyone out here!

Hello, yea.. thanks man =)
Basically, its a shared hard disk between my macbook and a windows PC. So i kinda use the PC to write all my backups and data on the hard disk.
I have quite a few hard disk and they all have the same issue. It says 'The item 'file x'cannot be moved because 'my hard disk' cannot be modified.'I've used the software provided from the hard disk manufacturer, Maxtor/Seagate, to reformat the brand new portable hard disk which i bought yesterday.
Its connected via USB, same as all the other ones i have.
eh. the get info for it says
Kind: Volume
Created: --
Modified: Thursday, 23 Aprl 2009 3:24AM
Format: Windows NT Filesystem
Capacity: 232.88 GB
Available: 232.57 GB
Ownerships & Permissions: You can only read.
erm... its a portable drive which i carry around, so i guess its not a network drive? and how doi determine the network settings? Sorry man.. not really good at these =x

I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please help

I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please helpand also note that my hard drive was formatted on a Windows 7 Laptop.

thats the problem, its in MSDos (Fat) or NTFS for Windows.
Options.....
1. offload all that data on the HD onto your PC, THEN format the HD in EXFAT for use on BOTH PC and Mac for read/write.....then reload all (or as you need) that data back onto the HD
2. get another HD, and format it for Mac OSX extended journaled.
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64) ------Can read/write from both PC and Mac
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

I cant able to copy my files from my macbook to external hard disk,its showing "read-only",but i can able to transfer files in windows os,why cant i able to do tht in here?

i cant able to copy my files from my macbook to external hard disk,its showing "read-only",but i can able to transfer files in windows os,why cant i able to do tht in here?

to frederic1943
Its in NTFS Format...and i hav downloaded the file NTFS-3G,but still i dont know wht to do with that.will u pls help me here.

Disk write cache corruption on an external hard disk

Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.

Disabling a write cache would not help you with the problem you are having. Besides the write cache is on the hard drive and operates independently of the operating system. But nothing can protect you from disconnected an external drive improperly, and if the drive is in the process of being written to, and the problem comes from directory corruption, not file corruption, as in the case you have described, disabling a write cache would not have made any difference.
For the future the magic word is: Backups.
< Edited by Host >

Problems with iPhoto after exporting library to external hard disk

Hello all,
I am using iPhoto 8 on an iBook G4. I recently attempted to back up my iPhoto library to an external hard disk. I did this by dragging the iPhoto library to the external hard disk. I did not delete the library on my own computer. Since I've done this, iPhoto has not been problematic. For instance, when I attempt to open an event on my computer, I can not see the thumbnails of all the photo's in the event - iPhoto will display each individual photo in sequence. If I want to print a picture, I have to export the entire event - I can't just drag the thumbnail to my desktop. Also, when I attempt to upload new pictures from my camera it produces an error.
Does anyone know what might be going on? I need to be able to access my photo's, so can anyone give me some advice on how to fix whatever I've done?
Any help you can give me would be much appreciated.

Gina2008
iPhoto will display each individual photo in sequence.
There's a slider lower right of the iPhoto Window - drag it left.
Why are you exporting to Print?
when I attempt to upload new pictures from my camera it produces an error.
What does the error say?
As for accessing your pics:
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto. With 10.5 you can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

I can't copy my itunes library to an external hard disk drive!!

this is my first time at the forum and i dont find a better way to ask, i want to copy my itunes library to an external hard disk drive for have a back up, but when i try to copy it it appears this message "the item "itunes music" has 1 or more items that are in use and cannot be modified", i dont know why, then i search for help in apple support and this article http://support.apple.com/kb/HT1751, but i do what it says and i still having my problem, i can't copy my music, that message keep's appearing and it dont let me copy my music.

forget it i discover my problem, this message gives u 2 option stop or continue i just click continue and it get copied, i think this is normal but like this is my fisrt time i dot this i get confused, i think i still used to windows, i cant believe because i have a ear with this computer. well anything is a good experience.

I currently have a MAC Mini, which has 1 Firewire 800 port. I have a 1TB external hard disk that runs at Firewire 400. Can I insert another external hard drive that runs at Firewire 800?

Here's the deal. Currently running SL 10.6.8 on a MAC Mini. Planning for eventual upgrade to ML. Have a 1TB external hard drive partitioned into two volumes, one volume for Time Machine and one volume for SL which I periodically update using Superduper. Thus I always have a point-in-time bootable backup on the external hard drive.
The MAC Mini supports Firewire 800. However, booting from my current external hard disk is pretty slow, since it only supports Firewire 400. I am considering buying an Iomega MiniMax which supports Firewire 800. Then, I would use the MiniMax as my bootable backup volume, and relegate the older hard drive to Time Machine.
So, question #1 is, can I daisychain the new MiniMax between the MAC Mini and my existing external hard drive? My expectation is that the new Mini Max would run using Firewire 800 and that the existing hard drive would run at Firewire 400 speed as it does today. If it doesn't (e.g., daisychaining in the Firewire 400 external disk with the MiniMax Firewire 800 external disk ends up running the whole leg at 400), my resolution will be to run the existing hard disk off an available USB port and have just the MiniMax running at Firewire 800.
Why am I going to all this trouble? That's question #2. I don't trust upgrades; they always break something. When I upgraded from 10.5.x to 10.6.x, the web directories got renamed, and all of my web apps 403'd until I figured out what happened. Plus, I have accounts for other family members, and in order to ensure their ability to use the computer during my upgrade process, I need to have the ability to fall-back quickly to a known-stable version of OSX. So what I'm trying to do is insulate myself from problems by partitioning the MiniMax into two volumes, taking a Superduper image of my current installation on the Mac Mini to MiniMax external drive volume 1, then upgrading to ML on the MAC Mini, and take a SuperDuper image of that to MiniMax external drive volume 2. Then, if the upgrade results in problems I can't resolve immediately, I can simply reimage the MAC Mini from MiniMax volume 1. BUT ...
... I've read that the ML installation creates a "service and support" partition that is different than the startup disk. I'm concerned that I won't be able to reimage the hard disk in the MAC Mini once I upgrade it to ML because of the partitioning changes it introduces on the startup disk. Theoretically, I +should+ be able to use the disk utility on my SL system to repartition the disk in the MAC Mini prior to reimaging it from my backup, but I'm considering the possibility that the new partition may be of a type that the SL disk utility cannot identify, and might therefore be unable to delete or even detect. So I'm hoping someone else has been down this road and can advise me. Even at Firewire 800 speeds, booting from an external disk is still going to be slow, so I want to be able to restore my SL image to the MAC Mini hard disk.
A little background on me. I work for a major disaster recovery provider. I used to have a Mac PRO G5, which I got used, and the first thing I did with it was install a second hard disk, SuperDupe an image from the first disk to the second, and made sure I could boot from the second. THEN I started using and customizing the MAC. I really feel vulnerable with the MAC Mini, since it only has the single internal hard drive - sort of like going out in public dressed only in a long T-shirt. So my whole thing is, I ABSOLUTELY MUST BE ABLE TO PUT THINGS BACK THE WAY THEY WERE before I do the migration to ML.
Obsessive-cumpulsive? Yep. Anal? You got it. That's why I'm in the DR business.

You may have overloaded the port, following the instructions below it should reset:
+1. Shut down the computer.+
+2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
+3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
+4. Plug the computer back in and turn it on.+
+5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
http://support.apple.com/kb/HT1317?viewlocale=en_US

Malignant secondary boot device. When I plug in an external hard drive which has time machine in one partition and a secondary boot device in another, the secondary boot takes over and wipes existing files. How do I turn it off but keep the time machine

Please help new (senior) convert to Mac Pro (OS X). Am following the 'switching to a Mac' portable genius 2nd ed, and as it advised, I bought an external hard drive (a Mac My Word) and partitioned it with one partition for a secondary boot device and another for time machine. Book implied I needed both. Seemed to download OK but now when i plug in the external hard-drive it wants to reboot me fresh all over again. How do I keep the time machine partition going but have the secondary boot device only in case of emergencies? Do I 'eject' that partition- and if so how do I do it from outside the hard drive (I am not game to reattach it currently)

Launch the System Preferences application (under the Apple menu) and select the Startup Disk preference pane. Set your internal drive as the startup disk. Close the window.

Finder freeze when opening folders of my Western Digital external hard disks

I'm facing a big issue. I'm runnin' Mac Os Lion, I realized a clean install a few days ago. Everything is going fine, but every time I plug an external hard disk on my MBP, I can see the disk appearing on my desktop or in the finder, and when I open it, the finder freezes, I have to reboot manually, or wait to relaunch the finder. My disks are in HFS format, used to work great on Snow Leopard no longer than a week ago... What is weird is that my time machine (external hard disk usb) works fine... Moreover, I can see the disks in the Disk Utility, I can't click on "verify permissions" but on "verify disk" and it says that the disks are fine... Any idea ?
PS : I could have erase everything on them and reformat, but I need the files inside...
Thanks

Hi!
Here's a suggestion from BDAqua:
In finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra number on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a number, and reboot.
cornelius

I cant plug in 2 external hard disks in macbook ?

Similar Messages

Maybe you are looking for