I cant print hp laserjet 1020 plus in domain conttroler system

hi
i have problem with hp laserjet 1020 plus printer i cant got print in doamin network. 

Hi dara_sham, 
Follow the steps in the document at the link below. 
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00381599&tmp_task=useCategory&cc=us&dlc=en&lang...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • HP LASERJET 1020 PLUS PRINTER PRINTING PROBLEM

    HI.
    I AM RAJA PAUL FROM INDIA, I HAVE A HP LASERJET 1020 PLUS PRINTER , NOW A DAYS   I AM FACE ING A PROBLEM , WHEN I AM GOING TO PRINT FROM THIS PRINTER , EVERY TIME PRITING LETEER SHOW  Distorted characters. WHAT I DO?   

    Hi @rajahp ,
    I see by your post that the printer is printing distorted characters. Thanks for providing the screen shot. I can help you.
    It looks like a issue with the toner or possible a hardware issue with the printer or fuser.
    Inspect the toner cartridge for damage:
    1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
    2. Check the memory chip for damage.
    3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
    CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
    Fingerprints on the imaging drum can cause print-quality problems.
    4. If you see any scratches, fingerprints, toner on the drum or other damage on the imaging drum, replace the toner.
    5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
    I have provided a document for cleaning inside the printer and running a cleaning page, resetting the printer and checking the driver settings. Resolving Print Quality Issues.
    Try printing a document again.
    Let me know the results.
    What kind of paper are you using?
    Try another type of paper to see if you have the same results.
    Are you using Genuine HP Toner?
    What is the toner level?
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet 1020 Plus not friendly with MS Excel ???

    Hi, I am having OS Window 8. I am able to print thru HP 1020 PLUS MS Word docs but not able to print MS Excel sheets as Laserjet printer does not appear in printers list. While setting it as default printer devices, i am getting error message "operation could not be completed (error 0X00000709). Plz guide.........
    Bhupender

    Hi Bhupender,
    Welcome to the HP Forums.
    I see that you are having issues setting the printer as the default printer and you can't print from Excel spreedsheets.
    I will do my best to assist you with this issue.
    I would set up a new Admin user account on the computer to see if this will allow you to set the printer as the default.
    Go to start->type change PC settings and press enter. In the opening page, on the left pane, navigate to Users and click it. On the right pane, scroll below, where there is an option Add new user. Click it. Select the appropriate account type and type the username. A new local user account will be created.
    Try printing from Excel again.
    If you are still having issues then I would do a full uninstall and download and install the Full Feature Software drivers.
    The driver might have become corrupted.
    Uninstalling the Printer Software.
    HP LaserJet 1020 Printer Drivers.
    Select your operating system, click next and click on the software to download and install.
    Hope this helps resolve your issue.
    Have a great day.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp laserjet 1020 plus driver for windows 98

    i want to download hp lasejet1020 plus driver for windows 98 ,on hp site win98 operating system are not available on list.
    Please send me driver on my email,because still i am using win98 for some necessary work which are not supported on upper verson.

    I did some research and found at one point Win 98, Win ME, and Win 2000 all used the same driver for this printer (atleast from what i could ascertain). Given that information, I would assume that the current available Win 2000 driver MAY work for Win 98 (can't be certain as I do not have a Laserjet 1020 plus to test this). Here is a link to that software if you wish to try it:
    http://goo.gl/ApsrA
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • HP Laserjet 1020 plus catridge leakage, the product is under warranty, what to do? on windows xp

    HP Laserjet 1020 plus catridge leakage, the product is under warranty, what to do? on windows xp

    If the cartidges you were utilizing were HP cartridges, then I would contact HP @ 800-474-6836 for troubleshooting and service options.
    Good luck
    Brent 
    Good Luck
    Brent
    ***** Please select issue confirmed on the post of the person whom recommended the solution that fixed your issue. This way future board members can quickly access the solution****

  • Printer HP LASERJET 1020 not working in WINDOWS 7 RDP but WORKING IN XP

    Our clients connect to server 2008r2  through rdp when they try to print with hp laserjet 1020 printer Its shows failed to print  would you like to view the print troubleshooter for assistance. This error only to windows 7 clients,.
    Windows xp client can print without any problem. 
    Hope i will get assist from these page.

    Hi Suresh,
    Thank you for your posting in Windows Server Forum.
    Which version of RDP client you are using for your environment?
    I recommend you to use RDP 8.0 or 8.1 for windows 7. Please check that spooler service is started on client side also. In addition you can try to install Hotfix available to resolve printing issue. Please try to download and install below hotfix hope your issue
    can be resolved.
    Update rollup: Fix printing problems in Windows 7 and Windows Server 2008 R2
    http://support.microsoft.com/default.aspx?scid=kb;en-US;2647753
    Apart from that if you are using RD Easy print then you can troubleshoot with below link.
    Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
    http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx
    Hope it helps! 
    Thanks,
    Dharmesh

  • My hp laserjet 1020 plus printer is not working in network in window 98 Pl give me a solution

    hiiii...

    Hi Gaurav,
    The printer is not compatible with Mac as you may see below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01973413&tmp_track_link=ot_faqs/top_issues/en_u...
    You may try the following workaround and check if tha may work:
    Download and install the following package:
    http://support.apple.com/kb/dl907
    Ensure the printer is powered on and connected to your Mac.
    Go to System Preferences > Printers & Scanners.
    Click the plus sign and select the printer.
    Click the Use menu and then click on Select Software.
    Select the HP Laserjet 1022 from the list and click on Add.
    Now try printing using the added Print Queue.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Print to Laserjet 1020 hosted by Windows 7 64 bit via network from Windows 7 32 bit

    I am trying to print from Win 7 32 bit to a HP 1020 connected to a 64 bit Win 7. (the 64 bit is a new computer).
    I have tried all the suggestions posted:
    Downloaded updated 32 bit driver to the 32 bit PC.
    I have also assigned the printer to a port on the computer.
    I enabled on the 64 bit printing from a x86 computer.
    Nothing helps.
    When I print, the job gets stuck on the computer connected to the printer. When i release the spool, it then prints the page.
    I was able to print when all the PCs were 32 bit (and XP before that).

    Hi NDK
    The host base driver is the same for both Win 7 32 & 64 bit operating systems.
    Win 7 32-bit:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-88660-1&cc=us&dlc=en&lc=en&...=
    Win 7 64-Bit:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-101596-1&cc=us&dlc=en&lc=en...=
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Hp laserjet 1020 plus

    i have hp laserjet 1020plus i am install in windows xp and shaed the printer some time working some time when the restart mechin only the printe is working

    Hi @Ravikumarmdu, 
    My best recommendation is to contact or reach out to Linux. I am sure this is not what you hoped to hear, but I thought it would be better to refer you then to leave you wondering!
    You might also find the follow Linux driver helpful. I am not 100% certain as the driver is not provided to you by HP, it can be found on the Linux Imaging and Printing Web site; Driver Support for Linux OS.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Hp Laserjet 1020 plus .how to reset the paper left margin based on Tray adjustment

    Paper Left Margin always set to an printer left margin .
    how do i Set paper Left margin set based on Input tray.pls. help me

    Hi,
    not sure if I understood your question well but here is some thought:
    we can't change the input tray margin and paper has to be placed on center and both gude should be adjusted properly. however if you want to set any margin on output, you can set margin on application.
    ExpertOne
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

  • HP LASERJET PRINTER 1020 PLUS

    Dear Sir / Madam
                  I WANT TO USE HP1020 PLUS LASERJET PRINTER   WITH B& R PC . PC HAVING TWO FLASH CARD EACH HAVING MEMORY OF 1GB.  WINDOW XP EMBEDDED SERVICE PACK-3
      How much memory will be covered during printer driver installation.

    Hello kavyasuresh,
    Welcome to the HP Support Forums!
    Thank you for posting your question regarding the LaserJet 1020 Plus and what system requirement are needed to install. I was able to find some information to answer this for you. It would appear that on XP the printer needs at least 128 MB of RAM and 150 MB of free disk space.
    To view the information your self, it is available here: Product Specifications. 
    I hope this answers your question.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Airport Express Base Station and HP Laserjet 1020 printer connected

    Dear all,
    I have a Laptop (PC) Sony Vaio PCG-Z1XSP and an Airport Express Base Station which work perfectly together (internet access and I-tunes). I recently bought a printer HP Laserjet 1020 and connected it to the Airport Express USB soket. I managed to make it work and print a couple of times, but as soon as I turn off the printer or the computer or Airport Express, the next time I want to print, it doesn't work anymore.
    The Airport Admin Utility recognises the printer (I can see it listed). I have updated the Airport Express software to the Firmware version 6.3 as well as downloaded the latest driver available on HP's website for my printer. I've also substituted the USB cable. Can anybody help me here? Thank you very much and best regards.

    Hallo everybody,
    Thanks for all the answers. I have contacted HP's chat online and gone through the problem with 3 different technicians. I've tried a lot myself too. The issue was partially solved by restarting the printer spooler, i.e. stop, then start and then restart it.
    However after I was so happy that the printer worked, I turn off everything. When I turn on again, it was not working anymore. Then I tried to see by exclusion what the problem is, I had to restart the Hardwar I don't know how many times.
    Conclusion:
    1. The USB cable must be plugged into the airport express before turning on anything.
    2. Turn on the printer first.
    3. Turn on the airport express and the computer.
    4. If you try to print it doesn't work, even if you reset the airport express through the airport express utility software. The printer is recognized and appears in it though.
    5. Disconnect the USB cable from the airport express and connect it to the PC directly.
    6. Print a document.
    7. Disconnect the cable and reconnect it to the airport express.
    8. Now you should be able to print wireless. You may need to reset the airport expresst with the utility softwar, but I managed to print without having to do it.
    9. The pörinter works even if you turn off and on again the computer, or you suspend the windows session and restart it, or if you put it in standby and restart it.
    10. The printer works even if you turn off the airport express and the computer, or the airport express alone and restart them/it.
    11. The printer doens't work anymore if you turn it off and onn again. In such a case you have to plug in/out as discribeb above.
    Solution: Leave the printer always on, or make the plug in/out every morning when you start the computer and print one page direclty before being able to print wireless.
    Does anybody have a solution to this problem? I mean it prints, but it is annoying to plug in/out every day, no?
    HP's technician says that it is not a recommanded solution the HP Laserjet 1020 with the airport express, since the printer works on a host based server basis... I mean it is easy to say that, but one expects to buy a printer that works always and not to have to plug in/out everyday, restart spooler and so on.
    Can anybody comment or suggest anything I can do to avoid this? Thank you and I hope this helps others too.

  • HP Laserjet 1020 problem with double-side printing

    Hi, everyone!
    I have a problem with my printer HP laserjet 1020. From the community I know that there is no driver for 1020, but there is for 1022 (http://support.apple.com/kb/DL907). I installed it and everything was fine until I tried to print 2-sided page... It appears 2-sided option disappeared and I don't know how to fix this...
    Can anyone help, please?
    Thank you for looking.

    AMW122,
    The part in the photograph appears to be part of the fuser assembly.  If it is part of the fuser assembly, I would recommend you replace the fuser.  An internet search on "LaserJet 3300 fuser" found several links.  
    From what I can see, it appears that the fuser sleeve is damaged which will continue to worsen.
    If it is not the fuser, can you post another photograph further away so that we can see the location on the printer where it is located, etc...
    Kaz
    Kazman
    I am an HP Employee
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Problems printing w2k8 + terminal services + hp laserjet 1020 printer

    Hi!
    I can not print from terminal services (w2k8 server r2) with a hp laserjet 1020 .document remains in the local print queue  but does not end,only in  RDP. I've
    searched through the HP's website  but they know nothing about it.I have another server with the same features and this all works well  and I've checked all the settings and are equal, only a difference:
    when printing from the server with problems in the local  print queue information shows the port where it is printed in this case is usb but when printing from the server to work properly, the print queue nothing is displayed in the column port.
    windows server 2008 r2 , 32 bit(terminal services) ,(isn't a dc server)
    windows 7 bussines 32 bit (local pc)
    printer:hp laserjet 1020
    please help me!!!!!
    Thanks in advanced

    Hi,
    Firstly, have you check the printer spooler service is started?
    Check the latest printer driver is installed on server?
    Apart from this you can check basic printer redirection requirements must be there for successful printer redirection.
    -  RDP 7.0 or above
    -  .Net Framework 3.5 or above
    -  If you connect over RD Gateway, ensure that the policy that disables printer redirection is turned off.
    -  GPO setting "Use Print printer driver first” must be set to “Enabled” for Easy Print redirection, and it has to be “Disabled” for Legacy Print. 
    More information.
    Printer redirection not working
    Apart there is update rollup for printing issue for Windows 7 and Server 2008 R2, you can try to download and install might this help to resolve your issue.
    Update rollup: Fix printing problems in Windows 7 and Windows Server 2008 R2
    Hope it helps!
    Thanks,
    Dharmesh

  • Wanting to connect my HP Laserjet 1020 to my new Mac OS.X 10.7.2

    can not print with my hp laser jet 1020 from mac Mac OS.X. 10.7.2.   Any help? Thx

    Quote taken from the HP web site:
    "We have received inquiries about Macintosh support for the HP LaserJet 1018, LaserJet 1018s, LaserJet 1020, LaserJet 1020 Plus, LaserJet CP1215, and LaserJet CP1217 printers. We are sorry to inform you that there is no Macintosh support available for your HP product."
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01973413&cc=us&dlc=en&lc=en &product=439320

Maybe you are looking for

  • Default cost center not appearing for certain users

    Hi Gurus, We are on SRM 4.0 classic scenario. For certain users when they create SC in SRM the default cost center is not automatically taken into account even if they change it to it. The default cost center was changed for these users and some of t

  • Division wise Aging for Customers

    Hi, Can we take division wise ageing for customers and add the division field at the time of payment entry(F-28)? Thanks in advance

  • Some nagging CSS image rollover questions

    Hi, I'm using DW CS4 here. I finally got a Top Horizontal Inline CSS navigation to work with CSS image rollovers. Here's the site: http://www.brightbeltmusic.com And here are my questions: -Why, when my original images are 90 px  wide x 30 h, do I ha

  • Itunes Match makes Music App stop working on iPhone 4

    I've had iTunes Match for about a month and my iPhone 4 music app has been sluggish throughout. Today when I tried to play any music on the phone it refused, I can't play anything. I pick an album, press play and nothing happens - it just stays stuck

  • Touch Apps for Creative Cloud Users

    I recently took a survey for Adobe and in that survey there was a question asking if I knew that Touch apps were available to Creative Cloud subscribers as part of our membership.  Maybe I misread, because this definitely doesn't seem to be the case.