I cant print with any printers at all...

I try to print using my HP lazerjet 2200 and the computer recognizes the printer. However when i click print it sends the job to the printer and then it never prints. The Print icon shows up on the dock and then after 3 or 4 seconds dissappears. When i look at the printing queue its empty and in colpeted print jobs it shows that the document printed. Ive tried the reset printing system trick and that doesnt seem to work. Ive also tried the Printer Setup Repair program and that was no use either. Iv even deleted the printer from the computer several times and added it again and i still have no luck. How can i fix this problem?

Ive even tried this with several other printers i have and none seem to work. However with my other mac and windows based pc's they work fine.

Similar Messages

HT201407 Hi, I upgraded my Iphone 3gs from version 4.1 to 6.0.1 but upon restarting, the sim card is no longer recognized, i cant restore with itune nothing at all!! i'm so confused and ****** off... please provide any help

Hi, I upgraded my Iphone 3gs from version 4.1 to 6.0.1 but upon restarting, the sim card is no longer recognized, i cant restore with itune nothing at all!! i'm so confused and ****** off... please provide any help

Is the SIM from the carrier the device is locked to?
Has the device ever been hacked or jailbroken?
Have you tried simply removing and re-installing the SIM? What about replacing the SIM?

I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Can ipod3 connect to print with an HP photosmart4500 all in one ?

Can ipod3 connect to print with an HP photosmart all in one 4500?

See:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=115&prodSeriesId=3575173&prodTypeId=18972&objectID=c02775166

Major Printing Problem - Can't Print in any App, with Any Printers

I help my Aunt with her three Macs (2 eMacs, 1 MacBook, all running 10.4.8 right now) at her office, and she had me come to help recently because one of the eMacs stopped printing anything; here's what happens:
In every app besides Word (e.g. Safari, TextEdit, AppleWorks, etc.): If I click File>Print... or press 'Command-P,' the cursor turns into the spinning rainbow for a few seconds, and nothing happens (meaning I can do anything I want in the application, as if nothing at all happened).
In Word: If I click File>Print... or press 'Command-P,' Word sits for a minute with the spinning rainbow, then locks up and quits itself. BUT, if I click the little 'print' button in the toolbar (the one that bypasses the print dialog box), the file will print.
I tried resetting the printing system, setting up different printers on the computer, printing over the network and over USB (directly connected to port 1 on the eMac), and re-downloading/installing the printer drivers for the Brother 5250DN laser printer AND the HP LaserJet 1200 laser printer, but all to no avail.
I can run the Printer Setup Utility and recognize the printers (via Bonjour over the network and via USB), and the computer can run the printer setup utilities, so I know the printer communicates fine with the computer. I also can print to the printers (both the networked one and the Brother) from any of the other Macs (including my own laptop) over the network. But I can't get the print dialog box to show up for any printer on the one eMac.
I'm determined that this problem lies within the OSX printing system, but reinstalling the whole OS is not an option, as I would have to re-setup all the software, user accounts, special network settings, etc. (even if I do an Archive and Install). Is there anything I can do??? (I seem to recall someone else having this problem, but I can't find that thread on the forum).

There's another thread describing this same problem. I am having the issue too. As I posted in the other thread:
"Well, I did a full Archive and Install, with restore user settings, and the thing still won't print! All apps crash when trying to print (except Mail.app, which is odd). So it appears all of the files required for printing are there since Mail.app works, but I still can't print from Safari, Firefox, Preview, TextEdit, etc etc. ARGH!!!!
Next step is to downgrade to 10.4.8."
If that doesn't work, I guess an Erase and Install would be th next step.

Printing with differnet printers

Hi,
I am developing forms using SAp Scripts. The client sometimes uses inkjet printer else dotmatrix printer. Since we have designed form for inkjet printer in print lay out the alignment for dotmatrix printer considerably varies. Is there a way by which we can design form for the two printers with perfect alignment?
Rakesh

Hi
No, Nothing can be controlled from Form side
Certain printers doesn't support certain fonts of data and prints not correctly
see the OSS notes
OSSNote:960341
Symptom
In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
Other terms
CONVERT_OTF, SAPscript, Smart Forms
Reason and Prerequisites
The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
Example:
%Charwidth values from HP4300 HELVE 060 normal
/Widths
[ 278 333 500 633 633 1000 758 333 333 333 633...
Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
Solution
Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 12:44:06
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
OSS Note: 776507
Symptom
Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
Other terms
SAPscript, SmartForms, printing, device types, OTF
Reason and Prerequisites
Help required to choose proper fonts in a SAPscript or SmartForm
Solution
When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
1) The language version of the form used to produce the printout.
Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
3) The output character set of the device type
Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
4) The set of available printer fonts for a given device type
When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
Note on SAPscript/SmartForms Print Preview:
The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
Which fonts are suitable for a given language?
Language(s):            Font family to use in a form:
Latin-1 (Western Europe/Americas) *******
DE,EN,FR,ES,NL,SV       COURIER, HELVE, TIMES
                        (LETGOTH, LNPRINT)
Latin-2 (Central Europe) ****************
PL, CZ                  COURIER, HELVE, TIMES
ISO 8859-4 (Baltic) *********************
ET, LT, LV              COURIER, HELVE, TIMES
ISO 8859-5 (Cyrillic) *******************
BG, RU, SR, UK          COURCYR, HELVCYR, TIMECYR
ISO 8859-7 (Greek) **********************
EL                      COUR_I7, HELV_I7, TIME_I7
ISO 8859-8 (Hebrew) *********************
HE                      COURIER, HELVE, TIMES
ISO 8859-9 (Turkish) ********************
TR                      COURIER, HELVE, TIMES
Simplified Chinese **********************
ZH                      CNHEI, CNKAI, CNSONG
Japanese ********************************
JA                      JPMINCHO, DBMINCHO, DBGOTHIC
Korean **********************************
KP                      KPBATANG, KPDODUM, KPGULIM
                        KPGUNGSE, KPSAMMUL
Traditional Chinese *********************
ZF                      TWDPHEI, TWMING, TWSONG
Thai ************************************
TH                      THANGSAN, THDRAFT, THVIJIT
Arabic (Unicode systems only) ***********
AR                      ANDALE_J
Verify your output by examining the OTF data
When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
Goto->Display Requests->Settings
and choose
Display Mode: Raw
Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
//XHPLJ8000    0700 00000000001
IN04EALEXTEST_ZEBRA
IN05%PAGE1
OPDINA4 P 144 240 1683811906000010000100001
IN06%WINDOW2
MT0024401289
CP11000000E
FCHELVE 120 00109XSF100SF101110000067E X
UL +0000000000000
SW00067
CT00000000
ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
//XHPLJ8000    0700 00000000001
The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
IN04EALEXTEST_ZEBRA
In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
OPDINA4 P 144 240 1683811906000010000100001
The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
CP11000000E
Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
FCHELVE   120 00109XSF100SF101110000067E X
Header Data
Release Status: Released for Customer
Released on: 22.08.2005 09:57:20
Priority: Recommendations/additional info
Category: Customizing
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
BC-SRV-SSF Smart Forms
<b>Reward points for useful Answers</b>
Regards
Anji

Unable to do mobile printing with HP Deskjet 3050 All-in-one J610a (CH376D)

I have a 3050 All-in-one J610a which I am using for about an year now.
In the beginning I was able to print/scan using HP app (probably HP home & Biz) on my iPhone4 but for past few months i didn't use it but kept updating the app to the latest versions. Now, I have tried all HP apps available on itunes App Store but none of the apps are able to detect my printer even though my windows laptops (running windows XP and Win7) are connected with the printer over wireless network and printing seamlessly.
I know my printer is not eprint or AirPrint compatible but am just trying for a regular wifi print sitting within the same network. After wasting about 6-8 hours trying to find a solution, I am posting this. Please help with any clues/ suggestions?
P.S. I am running iOS 6.0 on my iphone 4.

You're right. I have tried everything like Hp Eprint, HP Printer Control etc. but it is just not able to find my printer. I tried ePrint Free from microtech and that provides an option to connect to a printer by entering it's IP and I was able to connect. But then this free app has very limited usability so can't rely on it completely.

I have just started on an Ipad 3. During the the start up it selected an unkown language that I cant return to English so I cant interact with the Ipad at all.

I have just started on an Ipad 3. During the the start up it selected an unkown language.How can I return to English as I cant undrstand orinteract with the Ipad at all.

If you go to you home page choose settings which is the grey app with a wheel on it. When that opens it is automatically on general. On the right side of the screen you need to scroll down to the bottom. When you get there, there will be one white bar at the bottom and then above that there will be a group of four options. If you click on the third one that will open the section with language. The first one in that is language. Tap the arrow and choose English in that. I hope that works.

Troubles printing with networked printers

I have a printer connected to a Mac Mini (with Leopard installed) and am trying to send something to print from my G5. The computer sees the printer but it always comes back saying "com.apple.print.recoverable-warning". Apparently it is having trouble communicating with the printer. The computers are connected through a wireless connection using a airport extreme base station. The printer is physically connected to the Mini since the usb has a external drive connected to it. There are no problems printing from the Mini but only when trying to do it from another computer on the network.
Anyone have any suggestions?
Thanks,
D.J.

I get the same message (com.apple.print.recoverable-warning), but my printer is on, plugged in to a USB hub which is plugged into the TC. I've re-started the printer, plugged it directly into the TC USB port, added it as a new TC printer to my printer list and selected it, but no change. I'm about to give up on shared printing with the TC and just plug the printer back into one of my Macs.
Anyone have any other ideas? (Despite high hopes, the new Airport Utility update did nothing for me.)

Every so often I cant print to Appletalk printers

Hi there,
I am about 60 macs that I look after at my company.
Recently several users phone me up saying they cant print, and its always ones that are using Appletalk.
The only solution that I've found to work is to renew the DCHP lease and then to turn Appletalk Off and then back on. Then they print fine, and can last for hours or usually days without this happening again. Admittedly I haven't tried just turning Appletalk Off and On leaving the DCHP alone.
Just wondering if anyone else had the same issue?
Thanks in advance
newtonajn

I have the same issue and have solved it by using IP Printing instead of AppleTalk. Unfortunately this
introduced a new issue in that when we attempt to print from Photoshop the files are not interpreted and we print the binary file. Still looking for answers to this one as it's impacting about 40 Power Macs and Mac Pros.

Problem in Printing with HP Deskjet F370 All-in-One Printer

Product Name and Number: HP Deskjet F370 All-in-One Printer
Cartridge Number: Black - HP 21 Black Inkjet Print Cartridge (C9351AA)
Colour - HP 22 Tri-color Inkjet Print Cartridge (C9352AA)
Operating System Installed: Windows 7 Home Premium (64 Bit)
Hi,
I am using HP Deskjet F370 All-in-One Printer. Recently I am facing a critcal problem.
I am unable to print anything in red or brown colour.
The cartridges are in good condition with more than 80% ink level in color cartridge and 65% above in black cartridge.
I have done alignment of printer cartridges and also reset the printer.
However after that, I have taken a test print which works fine. I can print in black or any other colour expect red and brown.
Whenever I am trying to print anything in brown it is coming out in green colour.
I don't know what to do....Please help.
Thanks
Suvadeep Paul
Thanks
Suvadeep Paul

Hi there,
This article should cover the missing colors you are experiencing. Give the steps located here a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Printing with Hp psc 1110 all-in-one

Hello, is the first time for me with macbook problem and I hope to find the solution because the question is drive me crazy ...
I've tried to install a printer HP psc 1110 all-in-one, but after te installation of driver and software when i start to print the printer return me every time the same error (that i find in the log of printer)
E [15/Jun/2010:16:39:39 +0200] Unable to execute /Library/Printers/hp/cups/Inkjet7.driver/Contents/MacOS/Inkjet7: no execute permissions (0100664)
E [15/Jun/2010:16:39:39 +0200] [Job 2] Unable to start filter "/Library/Printers/hp/cups/Inkjet7.driver/Contents/MacOS/Inkjet7" - Operation not permitted.
E [15/Jun/2010:16:39:39 +0200] [Job 2] Stopping job because the scheduler could not execute a filter.
I've tried to do the installation of software many times but the problem is still the same.
Can someone help me?
thank you so much

I think you might have installed Old HP SW that is not compatible with 10.6.x. You have 3 choices:
- Delete all the HP SW you installed. The in system prefs, re-add the printer. 10.6 will download the drivers you need.
- Delete all the HP SW you installed. Download the drivers manually from Apple. (http://support.apple.com/kb/dl907) Install them.
- Visit HP's web site and download 10.6 compatible drivers.
Note to everyone, over 2000 drivers are built into the OS. If they work, don;t install older SW on top of them. The list of built-in drivers is here: http://support.apple.com/kb/ht3669

I got Snow leopard and now I cant print with Canon 4350d

Canon 4350 printer problem?
I get this message every time I try to print. I can scan and copy but not print. "Cannot communicate with the printer, or the printer is not supported, check the printer connection and add it again. Then, if the print dialog box has a printer info button, acquire the printer information: 10322"
i tried to download the driver but it gives the same message.
Please help.

The XPS portion of the name is for Windows 7. It's not going to cause a problem, its just an identifier for Windows 7 as the driver is included with that OS.
I have the MF4380dn on my desk and it shows the Printer Info button. So either your MF4350 model does not support this setting or the driver installation was not completed correctly. Since I don't have the same model to check I will suggest you look at removing the driver and installing the latest version, especially if you upgraded to Snow Leopard from Leopard with the UFR2 driver already installed.
To remove the Canon UFR2 driver
Open Print & Fax, select the MF4350 entry and press the minus button to remove the printer
Open Finder and navigate to
[Mac HD]/Library/Printers/Canon and delete the UFR2 folder
Still in Finder, navigate to
[Mac HD]/Library/LaunchAgents and delete the file jp.co.canon.UFR2.BG.plist
Still in Finder, navigate to
[Mac HD]/Library/Printers/PPDs/Contents/Resources and delete all the files showing CNTD***Z*2*.ppd.gz
Where *** indicates a character string that represents the printer model, and *2* indicates a character string that represents the corresponding language, most likely US for your region.
The last action is to open Activity Monitor and locate UFR2 Backgrounder. Select it and then select Force Quit.
With all the above steps completed, restart your Mac and then download and install the UFR2 v2.24 driver.

Photosmart 7520 prints with green tint on all photos

Need help in finding cause and correcting printing problem that causes all photosto have a green cast to them.It is actually most notable on in darker or shadow areas of the photo.It almost has a sepia appearance to it in those areas only. Cartiages are new, alignment is good.I use Google Picasa for storage and printing, the problem also occurs with Canon DigitalPhoto Professional software from my Canon Ti4 camera.

Hello gclyde991, Welcome to the HP Forums. I see that you are having some issues with the print quality of your print outs. I do have a few steps that we can attempt to troubleshoot this issue. First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. I have also located a document that deals with Fixing Print Quality Problems for the HP Photosmart 7520 e-All-in-One Printer Series. If you are still having issues, or if you have any other questions, please feel free to write me back. Cheers,

I cant do compile any packages at all

hi, I am trying to install yaourt... but it seems as if I can't;
I cd in to the folder where the PKGBUILD file are in, I run
makepkg PKGBUILD -si
and I missing some dependencies...
ofcourse I lookup it and cat install package query at all, I run the very same command (after I cd into package query folder)
makepkg PKGBUILD -si
but now it says this:
checking whether the C compiler works... no
configure: error in '/home/gilga-nnoitra/builds/package-query/src/package-query-0.8.1'
configure: error: C compiler cannot create executable
==>: A failure occured in build ().
Aborting...
so I took a look in the config.log file, but it is hard to read, and I do not understand much >.<
so now i am going to give you the config.log file an see if you guys can find anything wrong with it
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by package-query configure 0.8.1, which was
generated by GNU Autoconf 2.68. Invocation command line was
$ ./configure --localstatedir=/var --prefix=/usr --sysconfdir=/etc
## Platform. ##
hostname = Nnoitra
uname -m = i686
uname -r = 2.6.33-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = i686
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /bin
PATH: /usr/bin
PATH: /sbin
PATH: /usr/sbin
PATH: /opt/java/jre/bin
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
PATH: /opt/qt/bin
## Core tests. ##
configure:2251: checking for a BSD-compatible install
configure:2319: result: /bin/install -c
configure:2330: checking whether build environment is sane
configure:2380: result: yes
configure:2521: checking for a thread-safe mkdir -p
configure:2560: result: /bin/mkdir -p
configure:2573: checking for gawk
configure:2589: found /bin/gawk
configure:2600: result: gawk
configure:2611: checking whether make sets $(MAKE)
configure:2633: result: yes
configure:2767: checking for gcc
configure:2783: found /usr/bin/gcc
configure:2794: result: gcc
configure:3023: checking for C compiler version
configure:3032: gcc --version >&5
gcc (GCC) 4.6.1
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3043: $? = 0
configure:3032: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-pc-linux-gnu/4.6.1/lto-wrapper
Target: i686-pc-linux-gnu
Configured with: /build/src/gcc-4.6.1/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --disable-multilib --disable-libstdcxx-pch --enable-checking=release
Thread model: posix
gcc version 4.6.1 (GCC)
configure:3043: $? = 0
configure:3032: gcc -V >&5
gcc: error: unrecognized option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3043: $? = 1
configure:3032: gcc -qversion >&5
gcc: error: unrecognized option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3043: $? = 1
configure:3063: checking whether the C compiler works
configure:3085: gcc -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu conftest.c >&5
/usr/lib/gcc/i686-pc-linux-gnu/4.6.1/cc1: error while loading shared libraries: libppl_c.so.4: cannot open shared object file: No such file or directory
configure:3089: $? = 1
configure:3127: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "package-query"
| #define PACKAGE_TARNAME "package-query"
| #define PACKAGE_VERSION "0.8.1"
| #define PACKAGE_STRING "package-query 0.8.1"
| #define PACKAGE_BUGREPORT "[email protected]"
| #define PACKAGE_URL ""
| #define PACKAGE "package-query"
| #define VERSION "0.8.1"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3132: error: in `/home/gilga-nnoitra/builds/package-query/src/package-query-0.8.1':
configure:3134: error: C compiler cannot create executables
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu
ac_cv_env_LIBCURL_CFLAGS_set=
ac_cv_env_LIBCURL_CFLAGS_value=
ac_cv_env_LIBCURL_LIBS_set=
ac_cv_env_LIBCURL_LIBS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib/pkgconfig:/opt/qt/lib/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
## Output variables. ##
ACLOCAL='${SHELL} /home/gilga-nnoitra/builds/package-query/src/package-query-0.8.1/missing --run aclocal-1.11'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='${SHELL} /home/gilga-nnoitra/builds/package-query/src/package-query-0.8.1/missing --run tar'
AR=''
AUR_BASE_URL=''
AUTOCONF='${SHELL} /home/gilga-nnoitra/builds/package-query/src/package-query-0.8.1/missing --run autoconf'
AUTOHEADER='${SHELL} /home/gilga-nnoitra/builds/package-query/src/package-query-0.8.1/missing --run autoheader'
AUTOMAKE='${SHELL} /home/gilga-nnoitra/builds/package-query/src/package-query-0.8.1/missing --run automake-1.11'
AWK='gawk'
CC='gcc'
CCDEPMODE=''
CFLAGS='-march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CPP=''
CPPFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR=''
DLLTOOL=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
FGREP=''
GIT=''
GIT_VERSION=''
GREP=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu'
LIBCURL_CFLAGS=''
LIBCURL_LIBS=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAKEINFO='${SHELL} /home/gilga-nnoitra/builds/package-query/src/package-query-0.8.1/missing --run makeinfo'
MANIFEST_TOOL=''
MKDIR_P='/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='package-query'
PACKAGE_BUGREPORT='[email protected]'
PACKAGE_NAME='package-query'
PACKAGE_STRING='package-query 0.8.1'
PACKAGE_TARNAME='package-query'
PACKAGE_URL=''
PACKAGE_VERSION='0.8.1'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib/pkgconfig:/opt/qt/lib/pkgconfig'
RANLIB=''
ROOTDIR=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRIP=''
USE_GIT_VERSION_FALSE=''
USE_GIT_VERSION_TRUE=''
VERSION='0.8.1'
ac_ct_AR=''
ac_ct_CC='gcc'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include=''
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /home/gilga-nnoitra/builds/package-query/src/package-query-0.8.1/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='/var'
mandir='${datarootdir}/man'
mkdir_p='/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "package-query"
#define PACKAGE_TARNAME "package-query"
#define PACKAGE_VERSION "0.8.1"
#define PACKAGE_STRING "package-query 0.8.1"
#define PACKAGE_BUGREPORT "[email protected]"
#define PACKAGE_URL ""
#define PACKAGE "package-query"
#define VERSION "0.8.1"
configure: exit 77

f4rm0r wrote:
pacman -Syu
I get this:
alot of questions to update core linux and firmware kernels... then this;
:: tiacx: requires kernel26>=2.6.33
:: tacx: requires kernel26<2.6.34
how to fix this?
Remove the offending package so that you can update the kernel.
BTW, you have a typo in the second line: it's tiacx, not tacx. Did you copy-paste it or did you type it in?
Last edited by karol (2011-08-23 18:35:54)

I cant print with any printers at all...

Similar Messages

Maybe you are looking for