I cant read my number on my i tunes card i purchased

i cant read my i tunes card some of the numbers are missing

See:
iTunes Store: Invalid, inactive, or illegible codes

Similar Messages

  • TS1292 I cannot read code on back of I tunes card what can I do

    I cannot read the code on an I tunes card what can i do???

    If the page that you posted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • Cant read code to redeem money from gift card

    hi all merry christmas and happy holidays.
    i scratched off the back code of my $50 itunes gift card and the middle section is mostly white, and i cant see any letters or numbers on the card.
    these are the ones you need in order to redeem, surprise!
    i called apple support but they were trying to redirect me to weird numbers so i hung up and decided to try this
    so if anyone can help me id appreciate it thank you very much!!

    Click here and fill out the form, including the card's serial number and as much of the code you can read. This issue needs to be resolved by Apple Support; nobody here can help.
    (39142)

  • HT1349 i have a itunes card and cant read the number after i scratched it off

    < Serial Number Edited By Host >

    iTunes Support: http://www.apple.com/support/itunes/
    Perhaps Cards & Codes: http://www.apple.com/support/itunes/cards-codes/ ?
    Specifically the article about Invalid, inactive, or illegible codes may hekp: http://support.apple.com/kb/TS1292
    P.S. In the future, you might not want to post serial numbers in these public discussions.
            I have asked the Hosts whether your S/N should be edited out.
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • Msprot: cant read profile parameter rdisp/mshost

    Hi
    When I run : msprot -name <SID> -l it returns:
    cant read profile parameter rdisp/mshost
    rdisp/mshost is set in the default profile to : sapms<SID>
    in etc/services  sapms<SID> is assigined to   <port_number>/tcp
    If you change rdisp/mshost to the port number rather than sapms<SID> it works....but we don't want to change the parameter to the port number.
    Thanks
    Jim

    Thanks.....i've being testing the command....it's like it can't read the default profile...
    if i use mshost switch it complain it can't read msserv.....once I use both switch it runs ok....
    I changed default profile to 777 just to test if it was a permissions issue but that didn't make a difference.
    Thanks for the note but that seems to be dealing with windows...i'm working on sun...tried it on linux also and get
    the same problem....
    Cheers
    Jim

  • My computer shows the wrong reg key inslde i cant read the sticker what can i do

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer does not have the correct registration key needed to update your system to Windows 10, and I would be happy to assist you in this matter! To find out the product activation key for your computer's version of Windows, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
    www.hp.com/contacthp/
    I hope this helps!
    Regards

    My computer has the wrong registration key displayed inside and the one on the outside,(the sticker)there is one letter i cant read because it is worn. How can i get the original reg key before the upgrade on the 29th?

  • I cant get the number for imessage

    I cant get the number for imessage
    i press receive at and it only gives me my email

    An iPod uses the email address that you assign for Messages to receive messages. It is usually your Apple ID email address but you can add others to.

  • How to read a number from a web page

    hello everyone
    I need to read a number from a webpage. This number is online electricity price which is updated every 5 min. I need to use this price as a parameter in my controller
    any suggestion will be appreciated in advance
    Reza
    Solved!
    Go to Solution.

    "Scraping" is regarded as hacking by many sites.  Make sure what you are attempting is not violating their Terms of Service (if applicable).
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • How do I read the number of dropped frames in a 1394 session?

    I'm using a C program to acquire image data using the imaq1394 library. I am dropping frames at 30FPS and want to use the imaq1394GetAttributes call with the IMG1394_ATTR_LOST_BUFFER_NB parameter to read the number of dropped frames. I am doing this at the end of the acquisition before the camera is closed. The value always comes back as 0. What is wrong? Here is the line that makes the call:
    imaq1394GetAttribute(Sid, IMG1394_ATTR_LOST_BUFFER_NB, (unsigned long *) &lDroppedFrames);
    Thanks in advance...

    Hello spcmicro,
    Thank you for the email.
    For the IMAQ 1394 driver (version 1.0), the lost buffer attribute does not work properly.
    - The issue is not known to the developer lead, and it will be investigated for the next release of the IMAQ 1394 driver.
    Please let me know if you have any additional questions,
    Alan Hagler

  • Nook e-reader serial number produces error message 'not a valid serial number'

    Anyone know why my Nook e-reader serial number is not recognised when I try to register it?

    I've given up trying and found that I can download books onto my PC then onto the Nook.  Would have preferred to get them straight to the Nook but life's too short to be spending so much time making things work! Thanks for replying :-)

  • I got an itunes card cant read letters apple sent me a form in the email was no form just a link that brought me to support page i wasted 25$ for this card i just want anotheer code

    i got an itunes card and i cant read the letter i wasted 25$ for nothing since i cant use it i called customer support they said they sent me a form in my email to fill out there was no form in my email to fill out just a bunch of links that brought me to the main screen in the support page ive went all throughout the support page and cant seem to find this form or something that will help me all i want is a new code so i can use this card can you please just send me a new 25$ code

    See:
    iTunes Store: Invalid, inactive, or illegible codes

  • Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

    hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
    iv unistalled flash, iv checked plug ins it just wont work,

    It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    (If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.
    You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
    Use the FULL installer for 12.0.0.44:  Flash Player 12 (Mac OS X)
    And the instructons are here: Snow Leopard Clean Install.pdf
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • External hard drive seagate 3.0 cant read and not showing in disk management.

    Why my external hard drive seagate 3.0 cant read and not showing in disk management, while 2.0 can read. please help me to solve it. BIG THANK YOU.. 

    Hi,
    Yes, like Vegan said, you should check if your Seagate hard drive if it could available in USB 3.0 port. This is hardware related.
    Karen Hu
    TechNet Community Support

  • Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

    Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

    iPads do not do SMS.

  • I bought a 15$ i tunes card and i was scratching it and it peeled off and i cant read 9 or 10 letters and i cant find were to go can anyone help me im 14 and i have never done this before

    hi im 14 and i was scratching a i tunes card i got from macs across town and it peeled off so now i am stuck and cant get to the place were to fill out the info for it so i can buy black ops zombies ascension for my iphone and ipod and i cant see 9 or 10  digits and i am realy stuck please message me or help me please i really wanna buy it kk thanks for having ur time

    See http://www.apple.com/hk/en/support/itunes/store/giftcard/

Maybe you are looking for

  • GL Query 0FIGL_C10_Q0002

    I can't get the previous year in this query to populate with data. I checked the infocube for 2006 data and its there but it doesn't show up when I run the query. Anyone know of any solutions? Here is a link to the documentation on the query: http://

  • Document Splitting Characteristics

    What does the zero balance indicator do when defining document splitting characteristics for GL?  For example if we were splitting by Segment what is the significance of checking of the zero balance indicator?  How is the partner field used on that s

  • Thumbnail rendering

    Hi I like everything about Lightroom 2 except it's treatment of thumbnails. I have reams of similar photos so find that picking out the correct one from its thumbnails is slow and tedious. The wait whilst it twice re-renders every thumbnail seems int

  • Another about inheritance

    Well, in my monopoly game there is something I don't in the right way I guess. What I want to do I'd like, when the player lands on on a square, to display a panel in the center of the board with the square fields - say price, rent, owner for a stree

  • Agent Team Statistics summary display - CUIC

    Hi, We are using ICM8.x and trying to get the data that will display in Cisco Supervisor Desktop as Agent Team Statistics summary display and display them as a report in CUIC tool. Can some give me an idea of how to achieve that in report Definition.