I cant reboot my Presario CQ58 using my new HP system recovery DVD

My wifes computer slowed down and i tryed to reload windows for the back up but was unable too. i wiped the drive and ordered system recovery DVD from HP which i received today. I tryed to reboot the computer but kept getting the message No bootable device I tryed a recovery disk from a differant laptop anf it did attemt to reboot but stoped haf way as the recover disk was for a differant PC Please helpthanksJohn

Hi TJA ,
Here is video how to use them ( hope newer ):
https://www.youtube.com/watch?v=NBrBJ7sAqTo
All the best!!!
Dindin
<<<-------***
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HT4623 Is anybody having trouble with your ringer after installing OS 6.0 and using the new GPS system?

Is anybody having trouble with your ringer after installing OS 6.0 and using the new GPS system?

The good (?) news is many people are have OS 6.0.1 wifi problems.
I could not connect to my home network. What eventually worked for me (twice now), though it makes no sense, is to go to the particular connection you want to use, hit the little blue arrow on the right to get the details screen. Scroll down to the bottom and change "HTTP Proxy" from "None" to "Auto". Then leave the "URL" field that pops up blank.
This should not work. However, it has for me where many other suggestions have not.
*shrug*
Best of luck.

Diff bet args and using BufferedReader(new InputStreamReader(System.in))

What is the differece between getting a string via args and using BufferedReader(new InputStreamReader(System.in))??????
Please help me to know

via argsI presume you mean the command line arguments? Well that'd be the command line arguments: ergo: "Hello World" would be the arguments in: java -cp . Say "Hello World"
System.in is the standard input stream... The console (ie the keyboard) when a java program is run within a "standard" command line environment.
Cheers. Keith.

My iphoto library was opened remotely on a computer using a newer operating system. Now it won't open on mine!

My iphoto library was opened remotely via sharing on a computer using a newer (10.7) operating system. Now it won't open on mine (10.6). It says it needs a newwer version of iphoto, and I want this computer to stay at 10.6 for compatability with other programs. How can I access my photos?

When the library was opened you were warned this would happen.
You can restore your Library from your back up.
You can try revert the Library to the earlier version using iPhoto Library Manager
Or you upgrade to the same version.

Compaq presario cq61 312sa wont perform a system recovery from hard drive

When i turn on my Compaq Presario CQ61 312SA it looks like it is going to start ok then flicks to a white page with page cannot be found???
i have tried and would like to completely restore to it's original settings but when i turn it on and repeatedly press F11 it just beeps constantly and has a blank screen for ages.
any clues or quick fixes?
from searching online i gather i can't get hold of any recovery discs?
thanks, hope somebody can help

Hi:
If you can still read the windows 7 product key on the bottom of your notebook you can make your own W7 installation disk.
Here's how:
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Questions RE: Using System Recovery Discs on HP G71-358NR (Options?)

I bought my HP G71-358NR Notebook in Dec 2009. It has Windows 7 Home Premium x32/x64 ). I am on my second hard drive (had to replace in Feb 2012), and I do have the HP System Recovery DVDs (there are 2 of them), and the HP Driver Recovery CD (1 disc).
Short version (my actual question) - obviously I did a "clean re-install" the first time, since it was a brand-new hard disk, so everything on the Recovery Discs was used, and I don't remember exactly what happened during the install. But is there a way to do a "short version" - re-installing JUST the Windows OS (or "repairing" just that) - so that I don't have to also re-install everything already on my laptop (which all seems to be working fine - the only thing is I can't do the Windows/MS security updates, or any of their updates at all - but everything else seems to be working as normal - I did get my HP Support Assistant back, which runs and always tells me there are no problems to report). I don't remember if the Recovery discs ask you if you want to "ire-nstall or repair only the OS" or "do an entire, clean re-install" or not.
Here's the long version - as to what happened - in case anyone cares to read it - because it may give some insight, and since it involves 3 original HP software programs being "Uninstalled" - even though the HP Support Asst. is now back and seemingly running, maybe my problem stems from one of the other 2, and there IS something simpler I can do to fix this - I will tell you what I found that is "now wrong" in my laptop, how it got that way, and what I've already tried, obviously to no avail):
About 2 months ago my niece's boyfriend decided to "help me out" and make my computer faster, by looking at things - he looked at my programs, and for some of them he would ask me what it was and/or if I used them at all. He did not bother to ask me about the HP ones (which, up to this point, I had not removed because I did actually like them and find them useful - I had no idea he wouldn't ask me about them first, before arbitrarily uninstalling them). I wasn't exactly sure what he deleted at first (as I was busy chatting with my niece and sister). Right before he "cleaned things up," he also installed a new keyboard and screen. I dropped my laptop on cement a few weeks prior, and the screen broke (it was "blank" when I turned the laptop on, and completely unuseable). Also, I had gotten water in a few of the keys approx. 1-1/2 yrs ago, so a few keys didn't work right, so for any "major" writing, I used a wireless keyboard - so I figured that since I had to replace the screen I may as well also buy the keyboard to replace at the same time.
Everything worked fine after he replaced the screen and keyboard - I used my laptop for a few hours afterword, then turned it off. Before it turned off, it installed 28 updates (there were so many because I had not used my laptop for about 2-3 weeks, from the time my screen broke until I got it replaced). The next day it was working fine, but suddenly I was getting the message that I needed to Activate my Windows 7 Home Premium (that I may be using a "pirated" version, etc.). In trying to figure out what happened, I noticed that he "Uninstalled" 3 HP programs/software. The reason I know exactly which ones is because I decided to just do a "System Restore" to the time right before he messed around with things. At some point in my "looking around" in my laptop, I noticed that the BIOS wasn't right - I don't know a whole lot about it, so I rarely go in there, but I did notice one thing - that a lot of information was "missing" - info I KNOW should have SOMETHING there. When I ran the restore from the function key (F10?) I think it worked the first time - I believe that may be how I got my HP Support Assistant back - but when I tried it again a week or two later, it kept running the same 2 things (the "hard disk scan" and something else, I can't remember off-hand) over and over and over - each time saying that there were no problems.
The 3 he "Uninstalled" each had a "Restore Point" (I'm not sure if he put them there, of if HP automatically does it, as a "precaution"). The 3 are: 1) HP Setup, 2) HP Update and 3) HP Quick Launch Buttons. I tried using the System Restore several times - each time, it went through all the motions, but at the last step, when it "restarts" the laptop, it restarts and I get the message that "the System Restore was NOT successful," etc. And it tells you to try turning off your antivirus, etc. I did whatever it says to do, and it kept being "unsuccessful." I tried (again, several times) putting in my Product Key - which I KNOW for a fact is correct - but MS won't accept it. I cannot make out about 3-4 digits/characters of the COA - it's on the bottom of my laptop and they are "worn" to the point that I'm not sure exactly what they are (just those 3-4 ones, the rest I can read). I now know that there is a difference between the OEM-SLP and the COA-SLP keys (which I DO have a copy of the OEM-SLP key, from running a Belarc Advisor shortly after receiving my new laptop - mistakenly thinking that that was the only "Product Key" I ever needed - I was not aware of the COA-SLP, or the importance of saving it somewhere, until just recently, after all this happened). I don't really want to "change the Product Key" to the COA-SLP one, anyway, because during my research, I found one website that said:
“COA SLP: This is the Product key that you see on the sticker on the side or bottom of your computer. It is a valid product key, BUT SHOULD ONLY BE USED IN LIMITED SITUATIONS (such as if the OEM SLP key stops self-activating for whatever reason). The key must be activated by Phone. (Note: All manufacturers that use the OEM SLP system are required by contract to include a Certificate of Authenticity (COA) sticker, that has a COA SLP key, on the computer.”
(Note, other than those 3-4 digits/characters of the COA-SLP key, I can read everything else - Model #, Serial #, etc. - nothing else seems to have rubbed-off)I have been troubleshooting (researching and), ever since this happened approx 2 months ago. I have run the MS Genuine Advantage Tool (have the printout), ran the "scannow" (whose results said, “Windows Resource Protection did not find any integrity violations.” - ? Go figure), and even one solution that said to "Rebuild the license store" - which again did absolutely nothing. I have tried every "fix" except reinstalling via my Recovery Discs. At some point I became suspicious that my problem, was, in fact, due to him uninstalling any or all of those 3 HP programs. Then I found an answer to just about my same exact problem on an MS Windows troubleshooting page - they said:
“the HP OEM OS requires information in the HP motherboard to cause the OS to activate”
then it also listed WHY - it gave a couple examples from what the person's "Microsoft Genuine Advantage Diagnostic Tool" printout says - and those examples/results are EXACTLY what my printout says.
So I'm concerned that one of those HP programs contained information crucial - that communicates with BIOS/Motherboard, and tells them that my Windows 7 Home Premium x64 not only exists on this laptop, but is also LEGAL. If that's correct, is there a way to remedy it (and putting back those programs/software) via the HP website, without having to do a clean re-install and lose everything? Again - don't forget, the System Restore won't work, either (which I assume has something to do with the BIOS info being gone?)

If your BIOS is missing critical info which id's it as an HP machine, such as model,serial,etc it usually requires service from HP to correct it. I will try a contact I have to see if he can help. He stays quite busy so it may take a few days before I know anything.
The fact that your Windows is requiring activation would cause the failure of Windows updates, etc since MS thinks you re running pirated software. The info in BIOS is what defines whether or not you are legally running OEM Windows. This is when the COA license would help, since it would replace the OEM key used to install at the factory -which "appears" to be running illegally now if pertinent info is missing in BIOS.
I have seen it suggested that sometimes you can make out all of the numbers by focusing a bright flashlight on the COA label
Removing the HP software you mentioned should not have any affect on BIOS info. However you can install/reinstall most software/drivers from your Support page:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4080...
OR-by using Recovery Manager-Reinstalling Drivers/Software>> Windows 7
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I cant reboot. Shutdown freezes at sending SIGTERM to processes

I could use some advice. For the past 4 months or so I have not been able to do a full shutdown or reboot. When I run the shutdown -r now or reboot commands the process starts but freezes at Sending SIGTERM to processes. At this point I can switch to diffrent terminals with Ctrl+Alt+F? but I cant type.The only thing I can do is hold my power button down to shut off. I have been searching online fore awhile and restored my rc.shutdown script to the original backup I have from months ago but I am still having the same issues. Ill attach my local and shutdown scripts
Thanks for taking a look.
rc.local
#!/bin/bash
# /etc/rc.local: Local multi-user startup script.
#/bin/plymouth quit --retain-splash
alsactl -f /var/lib/alsa/asound.state restore
#rm /tmp/.X25-lock
mount LABEL=Backup /home/ahron/Dropbox/Backup
mount LABEL=FatBackup '/home/ahron/Backup Images'
#su ahron -c "vncserver -geometry 800x600 -alwaysshared -localhost -dpi 96 :25"
rc.shutdown
#!/bin/bash
# /etc/rc.shutdown
. /etc/rc.conf
. /etc/rc.d/functions
# avoid staircase effect
stty onlcr
echo " "
printhl "Initiating Shutdown..."
echo " "
run_hook shutdown_start
[[ -x /etc/rc.local.shutdown ]] && /etc/rc.local.shutdown
stop_all_daemons
run_hook shutdown_prekillall
kill_all
run_hook shutdown_postkillall
stat_busy "Saving Random Seed"
RANDOM_SEED=/var/lib/misc/random-seed
install -TDm 0600 <(:) $RANDOM_SEED
POOL_FILE=/proc/sys/kernel/random/poolsize
if [[ -r $POOL_FILE ]]; then
read POOL_SIZE < $POOL_FILE
else
POOL_SIZE=512
fi
dd if=/dev/urandom of=$RANDOM_SEED count=1 bs=$POOL_SIZE &>/dev/null
stat_done
[[ $TIMEZONE ]] &&
status "Saving Time Zone" \
cp --remove-destination "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
# Write to wtmp file before unmounting
halt -w
status "Deactivating Swap" swapoff -a
# stop monitoring of lvm2 groups before unmounting filesystems
[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) && -d /sys/block ]] &&
status "Deactivating monitoring of LVM2 groups" \
vgchange --monitor n &>/dev/null
# if we don't have devtmpfs support, /dev is mounted as tmpfs, so don't unmount it
status "Unmounting Filesystems" \
umount -a -r -t nodevtmpfs,notmpfs,nosysfs,noproc,nodevpts -O no_netdev
run_hook shutdown_postumount
# Kill non-root encrypted partition mappings
if [[ -f /etc/crypttab && $CS ]] && grep -q ^[^#] /etc/crypttab; then
stat_busy "Deactivating encrypted volumes:"
# Maybe someone has LVM on an encrypted block device
# executing an extra vgchange is errorless
[[ $USELVM = [Yy][Ee][Ss] ]] && vgchange --sysinit -a n &>/dev/null
do_lock() {
stat_append "${1}.."
if $CS remove "$1" &>/dev/null; then
stat_append "ok "
else
stat_append "failed "
fi
read_crypttab do_lock
stat_done
fi
[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) && -d /sys/block ]] &&
status "Deactivating LVM2 groups" vgchange --sysinit -a n &>/dev/null
status "Remounting Root Filesystem Read-only" \
lsof /
mount -n -t ext4 --verbose -o remount,ro /dev/sda3 /
reboot -d -f -i
run_hook shutdown_poweroff
# Power off or reboot
printsep
if [[ $RUNLEVEL = 0 ]]; then
printhl "${C_H2}POWER OFF"
poweroff -d -f -h -i
else
printhl "${C_H2}REBOOTING"
# if kexec is installed and a kernel is loaded, use it
[[ -x $(type -P kexec) ]] && kexec -e &>/dev/null
fi
# End of file
# vim: set ts=2 sw=2 noet:
Last edited by ahronzombi (2011-11-12 17:10:43)

So installing the testing initscripts seems to fix the reboot command, but still the most commonly used command shutdown -r now still wont do a full reboot.
/etc/rc.local.shutdown
#!/bin/bash
# /etc/rc.local.shutdown: Local shutdown script.
#killall dropbox
#umount /home/ahron/Dropbox/Backup
#killall Xvnc
#fuser -vm /
/etc/rc.d/functions
NETFS="nfs,nfs4,smbfs,cifs,codafs,ncpfs,shfs,fuse,fuseblk,glusterfs,davfs,fuse.glusterfs"
# Check local filesystems
fsck_all() {
fsck -A -T -C"$FSCK_FD" -a -t "no${NETFS//,/,no},noopts=_netdev" $FORCEFSCK
# Single-user login and/or automatic reboot after fsck (if needed)
fsck_reboot() {
# $1 = exit code returned by fsck
# Ignore conditions 'FS errors corrected' and 'Cancelled by the user'
(( ($1 | 33) == 33 )) && return 0
if (( $1 & 2 )); then
echo
echo "********************** REBOOT REQUIRED *********************"
echo "* *"
echo "* The system will be rebooted automatically in 15 seconds. *"
echo "* *"
echo "************************************************************"
echo
sleep 15
else
echo
echo "***************** FILESYSTEM CHECK FAILED ****************"
echo "* *"
echo "* Please repair manually and reboot. Note that the root *"
echo "* file system is currently mounted read-only. To remount *"
echo "* it read-write type: mount -n -o remount,rw / *"
echo "* When you exit the maintenance shell the system will *"
echo "* reboot automatically. *"
echo "* *"
echo "************************************************************"
echo
sulogin -p
fi
echo "Automatic reboot in progress..."
umount -a
mount -n -o remount,ro /
reboot -f
exit 0
mount_all() {
mount -a -t "nosysfs,no${NETFS//,/,no}" -O no_netdev
umount_all() {
# $1: restrict to fstype
local mounts
while read -r target fstype options; do
# match only targetted fstypes
if [[ $1 && $1 != "$fstype" ]]; then
continue
fi
# don't unmount API filesystems
if [[ $target = /@(proc|sys|run|dev|dev/pts) ]]; then
continue
fi
# avoid networked devices
IFS=, read -ra opts <<< "$options"
if in_array _netdev "${opts[@]}"; then
continue
fi
mounts+=("$target")
done < <(findmnt -runRo TARGET,FSTYPE,OPTIONS / | tac)
umount -r "${mounts[@]}"
remove_leftover() {
stat_busy "Removing Leftover Files"
# handle this separately until we declare the non-symlinks obsoleted
[[ ! -L /var/lock ]] && rm -rf /var/lock/*
if [[ ! -L /var/run && -d /var/run ]]; then
find /var/run/ \! -type d -delete
ln -s /run/daemons /var/run/daemons
fi
/usr/lib/initscripts/arch-tmpfiles --create --remove && stat_done || stat_fail
bootlogd_stop() {
[[ -f /run/bootlogd.pid ]] || return 0
touch /var/log/boot
kill $(< /run/bootlogd.pid)
rm -f /run/bootlogd.pid
sed -i -r -e 's/\^\[\[[0-9]?;?[0-9]?[0-9]?;?[0-9]?[0-9]?[ms]//g' \
-e 's/\^\[(\[1?[0-9][0-9]|%)G//g' -e 's/\^\[\[0;1//g' /var/log/boot
# Custom hooks in initscripts #
# Hooks can be used to include custom code in various places in the rc.* scripts
# Define a hook function in a functions.d file using:
# function_name() {
# add_hook hook_name function_name
# It is allowed to register several hook functions for the same hook
# Is is also allowed to register the same hook function for several hooks
# Currently, the following hooks exist:
# sysinit_start: at the beginning of rc.sysinit
# multi_start: at the beginning of rc.multi
# single_start: at the beginning of rc.single
# shutdown_start: at the beginning of rc.shutdown
# sysinit_end: at the end of rc.sysinit
# multi_end: at the end of rc.multi
# single_end: at the end of rc.single
# sysinit_udevlaunched: after udev has been launched in rc.sysinit
# single_udevlaunched: after udev has been launched in rc.single
# sysinit_udevsettled: after uevents have settled in rc.sysinit
# single_udevsettled: after uevents have settled in rc.single
# sysinit_premount: before local filesystems are mounted, but after root is mounted read-write in rc.sysinit
# sysinit_postmount: after local filesystems are mounted
# shutdown_prekillall: before all processes are being killed in rc.shutdown
# single_prekillall: before all processes are being killed in rc.single
# shutdown_postkillall: after all processes have been killed in rc.shutdown
# single_postkillall: after all processes have been killed in rc.single
# shutdown_postumount: after filesystems are unmounted
# shutdown_poweroff: directly before powering off in rc.shutdown
# Declare add_hook and run_hook as read-only to prevent overwriting them.
# Too bad we cannot do the same thing with hook_funcs
if (( RC_FUNCTIONS_HOOK_FUNCS_DEFINED != 1 )); then
declare -A hook_funcs
add_hook() {
[[ $1 && $2 ]] || return 1
hook_funcs[$1]+=" $2"
run_hook() {
[[ $1 ]] || return 1
local func
for func in ${hook_funcs["$1"]}; do
"${func}"
done
declare -fr add_hook run_hook
declare -r RC_FUNCTIONS_HOOK_FUNCS_DEFINED=1
fi
# Function for setting console font if required
set_consolefont() {
[[ $CONSOLEFONT ]] || return 0
stat_busy "Loading Console Font: $CONSOLEFONT"
#CONSOLEMAP in UTF-8 shouldn't be used
[[ $CONSOLEMAP && ${LOCALE,,} =~ utf ]] && CONSOLEMAP=""
local i
for i in /dev/tty[0-9]*; do
setfont ${CONSOLEMAP:+-m "${CONSOLEMAP}"} \
"$CONSOLEFONT" -C ${i} &>/dev/null
done
if (( $? )); then
stat_fail
elif [[ $CONSOLEMAP ]]; then
cat <<"EOF" >>/etc/profile.d/locale.sh
if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\033(K"; fi
EOF
stat_done
else
stat_done
fi
if [[ $DAEMON_LOCALE = [yY][eE][sS] ]]; then
LANG=${LOCALE:-C}
if [[ -r /etc/locale.conf ]]; then
parse_envfile /etc/locale.conf "${localevars[@]}"
fi
else
export LANG=C
fi
# set colors
if [[ $USECOLOR = [yY][eE][sS] ]]; then
if tput setaf 0 &>/dev/null; then
C_CLEAR=$(tput sgr0) # clear text
C_MAIN=${C_CLEAR}$(tput bold) # main text
C_OTHER=${C_MAIN}$(tput setaf 4) # prefix & brackets
C_SEPARATOR=${C_MAIN}$(tput setaf 0) # separator
C_BUSY=${C_CLEAR}$(tput setaf 6) # busy
C_FAIL=${C_MAIN}$(tput setaf 1) # failed
C_DONE=${C_MAIN} # completed
C_BKGD=${C_MAIN}$(tput setaf 5) # backgrounded
C_H1=${C_MAIN} # highlight text 1
C_H2=${C_MAIN}$(tput setaf 6) # highlight text 2
else
C_CLEAR="\e[m" # clear text
C_MAIN="\e[;1m" # main text
C_OTHER="\e[1;34m" # prefix & brackets
C_SEPARATOR="\e[1;30m" # separator
C_BUSY="\e[;36m" # busy
C_FAIL="\e[1;31m" # failed
C_DONE=${C_MAIN} # completed
C_BKGD="\e[1;35m" # backgrounded
C_H1=${C_MAIN} # highlight text 1
C_H2="\e[1;36m" # highlight text 2
fi
fi
# prefixes:
PREFIX_REG="::"
PREFIX_HL=" >"
# Source additional functions at the end to allow overrides
for f in /etc/rc.d/functions.d/*; do
[[ -e $f ]] && . "$f"
done
# Exit current shell if user is not root
need_root() {
(( EUID )) && printf 'You need to be root.\n' && exit 1
# Quit script if it's not running by root
# This can be disabled in scripts sourcing functions by setting NEED_ROOT=0
# A local call to need_root can be done to ensure part of script need root privilege
(( ${NEED_ROOT:-0} == 1 )) && need_root
# End of file
# vim: set ts=2 sw=2 noet:

Iphone4 shows black screen and cant reboot with power n home button. need suggestions.

i cant reboot or turn off iphone 4! stays on black screen can hear phone use like saved alarms and received text messages any thoughts on how to reboot phone or bring up home screen. any suggestions would be appreciated.
hlouie69

See this Discussion
https://discussions.apple.com/message/19521062

How can I change the old Apple ID, and i want to use my new Apple ID, i dont know the password because my phone is a gift for me of my sister what should i do, i cant update my iphone4 pls help me

How can i use my new Apple ID, instead of using the old Apple ID what will i do to delete the old Apple ID in my phone

Heres the situation guys, my sister is working abroad, when she went home, she gave me her iphone, I started using this phone almost a year now, when Apple noticing me to update my phone, I cant do it because i don't know the password, i create my own Apple ID and started using it just now, everytime i try to update my phone the old Apple ID kept on appearing instead of my Apple ID,

I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

HT1473 Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option wha

Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option what am i doing wrong?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

Often, Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted.

Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).

well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy

I just got my ipad and i cant figure out how to use it

i just got a new ipad and i cant figure out how to use it can u help me program it

You have to "activate" it with a computer having iTunes loaded. (Or have the apple store activate it for you)
You would connect the iPad to the computer's USB port with the supplied cable.
The itunes will walk you through the process with messages.
Then, you can explore and add music and apps with itunes or download them from the itunes store.
One way to get good training is to find someone with an iPhone or ipod touch and let them give you a few minutes of training.
Or take it to an apple store and ask for a quick demo.
You will catch on quick, fast and in a hurry.
Also, watch the videos on this web page: http://www.apple.com/ipad/

Why cant I encode a .mov using Adobe Media Encoder CC to .mp4 or .ogv to use in Edge?

Why cant I encode a .mov using Adobe Media Encoder CC to .mp4 or .ogv to use in Edge?

Yeah, mp4 in HTML5 browsers is h.264 encoded - h.264 is a subset of MPEG-4 standard. More info here:
H.264/MPEG-4 AVC - Wikipedia, the free encyclopedia
For ease of use in AME, if you look at the right side of the UI in the presets, the Web Video > YouTube presets are the ones that will encode to h.264 with the mp4 extension.
hth,
Joe

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

downloaded new version but I keep getting error message with download.
What does the error message say, andrea? (Precise text, please.)

I cant reboot my Presario CQ58 using my new HP system recovery DVD

Similar Messages

Maybe you are looking for