I cant renistall my 10.5 after update to 10.5.3

Hi - i want to reinstall the os then i try to boot from dvd But i cant ,,, i try to press c ,,, also to boot from comm alt shift delete ,,
Any comments appreciated

I actually had this same problem. For whatever reason I can't find / don't have the installation DVD for this brand new Mac Pro, I'm talking to the Mac authorized dealer I bought it from about that (bringing it in Monday), but I do have a full version of Leopard that I bought for my old G5 before it bit the dust, so I was trying to use that. Well, on 10.5.3, at least with my computer, you cannot install Leopard apparently. At least I've had no luck and this is the newest, most advanced Mac money can buy. I've run RAM tests on it, hard drives are new, I've tested them, etc. No luck at all. It will cause a kernel panic and you must unplug the DVD drive or somehow get that DVD out of there otherwise it will constantly cause a kernel panic upon startup. It's really ridiculous. 10.5.3 has been a terrible update, and I never should have made the mistake of installing it. Actually, I didn't, my editor did, but he shouldn't have been allowed to do so until a month or so of it being out.

Similar Messages

I have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

i have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

touch me wrote:
it says ICCID: unknown
Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

Cant get itunes to open after update. have uninstalled and reinstalled 3 times

Cannot get itunes to open after updating. Have uninstalled and reinstalled 3 times asper itunes instructions.

Okay. That's got the most common (current) possibility ruled out.
There's a lot of stuff that might be on the table still, though.
In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

Cant receive or sent email after update to ios5

Hey,
Since I've updated my iPad and iPhone I cannot receive ande sent mails while behind a proxy server. I've deleted and re-created my email accounts, still not working. Exchange, iCloud, hotmail an gmail don't work anymore.
Anyone having this same problem, what can I do to solve it?
Thanks miranda

totally agree. After updating iPad2 to iOS5 my MobileMe email account went a bit wrong. Trying to send an email in Mail I found that my main account name was not available to send from. Weirdly two of my aliases were available, even though I've never used them on the iPad!
Deleted the MobileMe account and re-entered it.
Intersting that the account now shows up as [email protected] even though I entered [email protected] Looks like Apple is trying to distance itself from MobileMe already
By the way, there's a known problem with MobileMe mail at the moment affecting all users, not just iPad users, see the MobileMe forum for details.

Cant get past the login after update fail? (OSX 10.8.3)

Hi!
I have a big problem! This morning i tried to update my mac to the lastest version (10.8.3). Somthing made it to fail and i hade to reboot the system.
Now the systems starts as before but when i type in my password and press enter, the screen flashes and i go back to the login again?
I can start the system i Safe mode but not i normal mode.
I have tried to repare the system with the disc tool but i still does not work.
Any ideas?
//VIktor
Macbook pro mid 2009

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copying and pasting as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-3 are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal.

Cant adjust my brightness setting after updating window 8.1

My comp cant adjust its brightness and its super bright help please?

Hi,
How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers.
There are numerous driver updates posted under Windows 8.1
Start with the chipset then reboot and apply the others.
See if you then can adjust the brightness via the Windows 8 settings then the Intel Control Panel Display.
Try the firmware update posted under Windows 8 if all else fails.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HT201441 hi i cant activate my iphone 5 after update ot ios 7. i have only one apple id , but when i enter i see that i cant activate with this id. I cant use my iphone pls help me how to activate

hi my id is do** @gmail.com, I buy from BG Globul on 9.9.2013. When i upgrade on ios 7 i cant activte becouse when i enter id and pass for appstore i see that i cant activate the phone with this id.
I dont have another id
Pls help me!
<Personal Information Edited by Host>

Hello GDonkov,
I'd suggest taking a look through the following article for information and steps that can help get your iPhone activated.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Allen

I cant open my iphone 3g after updating its ios. i try to restore my device but it always encounter unknown error that's why it cam back to the point when i open my phone i always see the itunes icons and usb device icons. and it already stock there.

help me guys please. who know any effective solution for this problem?

thank yo. i already did that but after that it says error occur so the restoring is becoming failed and go back to connect it to itunes huhu. i was so freaking sad about it. i'm trying to fix it and yet it cant

Cant setup e-mail account after updating the SIM c...

I have a Nokia 6790 Slider and Straight talk deleted my phone number by mistake, they ended up having to replace the SIM card and now my email doesnt work
I Click on my @e-mail address(0), It opens the e-mail inbox screen which is empty. I click back and it goes to E-mall Setup Screen. Then it shows Testing Network Connections Then Contacting e-mail server, then I get a screen with E-mail Provider Icons on it Ovi Mail, Yahoo Mail, Gmail, Hotmail, Other. I click on Other, Then A Getting E-mail Settings small window, then a small window with a place to put the E-mail address. I put in my e-mail address and click OK. Then I get Getting E-mail Settings small window, It does this twice then I get Unable to connect to server, Try again Laterin a small window. This is What I have been getting for the past two weeks ever sense you changed my cell phone number and replaced my SIM card.
Other ways I have Tried
I click on Menu, then the Messaging Icon, Then the Email Icon, it goes to E-mall Setup Screen. Then it shows Testing Network Connections Then Contacting e-mail server, then I get a screen with E-mail Provider Icons on it Ovi Mail, Yahoo Mail, Gmail, Hotmail, Other. I click on Other, Then A Getting E-mail Settings small window, then a small window with a place to put the E-mail address. I put in my e-mail address and click OK. Then I get Getting E-mail Settings small window, It does this twice then I get Unable to connect to server, Try again Later in a small window.
I click on Menu, then the Messaging Icon, Then the Set up Email Icon, it goes to E-mail Setup Screen. Then it shows Testing Network Connections Then Contacting e-mail server, then I get a screen with E-mail Provider Icons on it Ovi Mail, Yahoo Mail, Gmail, Hotmail, Other. I click on Other, Then A Getting E-mail Settings small window, then a small window with a place to put the E-mail address. I put in my e-mail address and click OK. Then I get Getting E-mail Settings small window, It does this twice then I get Unable to connect to server, Try again Later in a small window. I have reset the phone back to factory settings, I even reinstalled the phone software and still getting the same thing. I think the problem is that the old email address is stuck in the phones memory and I cant change it. I wander if you can delete it so i can start all over, you would thing setting it back to factory would have done this, but it didnt.
Keith
Using a Nokia 6790 Slider

@Easttexasdragon
Welcome to the forum!
Have you tried going to http://www.ovi.com/services/ Sign In and go to Account and try making your new number (Primary number) and click on the verify and you should receive SMS with embedded link?
When it tries to verify during mail setup it should then reconcile with device.
Happy to have helped forum with a Support Ratio = 42.5

Cant Sync atv1 with itunes after updating OSX

recently reinstalled snow leopard and now i cant sync etc with my atv1. It comes up in the devices list but when i click on it all i get is a settings tab and a photos tab. Previously i had several tabs that would allow me to sync programs etc. Programs bought on atv not showing up in library--because i cant sync them. pleasse help!!!!

Welcome to the Apple Community.
Go to settings/computers/your library and disconnect, then computers/settings/connect to iTunes and reconnect.

Cant enable tuchpad while typing after updating to windows 10!

So yesterday I updated my Pavilion to windows 10 and I used to have a problem when I could not type while holding down a key in windows 8 but I fixed that by turning off smartsense but that wont work in windows 10.. I put all my old touchpad settings I had on windows 8 to windows 10 but I am haveing no luck and have found no solution to this problem! Any help is appreciated please respond!

spdfolife wrote:
Hi everyone, I updated my operating system to Window 10 from Windows 7 four days ago and I am having a ton of problems. I lost a lot of my Lenovo interface options as well... One of the worst and most annoying problems is that randomly, for half a second, the computer stops and thinks which freezes up my typing. If I am writing something, when it wants to freeze it prevents me from typing that letter. It basically overrides my keyboard well it does that freezing for half a second. Also, when I have a drop down menu it will close when this happens or when I right click, the menu will disappear when this "glitch" happens. One of the biggest clues I found is under the task manager. In the Processes tab, when this "glitch" happens "Windows Problem Reporting" pops up for a half second. I am not sure if that is causing this problem or if something goes wrong and "Windows Problem Reporting" pops up because of something else? Is there a way to check and see what these "Windows Problem Reporting" are? My other problems are that my fan control does not work anymore. I had the option to control the speed and the sound of my fan before updating to Windows 10. Would Lenovo or Windows 10 ever going to sent a drive to fix this problem? Also, I can not control my GPU switch anymore. Before the update I could change my GPU from Intel HD card to Geforce 555M. Now I have no idea what GPU I am using and how to go back and forth. Is there a fix for this? Since all these problems occurred with the Windows 10 update, would it be better for me to go back to Windows 7 and wait to see if Lenovo and Windows ever going to create drives for Lenovo Y570? Is it advisable to switch back W7 and switch back to W10 later?There might be a need to reinstall drivers. Try installing them using compatibility troubleshooter.

I cant turn off my iphone after updating to 2.0.1

When I turn off or shot down my iphone it goes on by itself. Does anyone hase the same problem?
Thank you!

How are you turning off your phone? Because if you're holding down the wake/sleep button and the home button at the same time, that will restart the phone and it will come back on. But if you're just holding down the wake/sleep button and swiping to turn off, then it should stay off.

After updating to ios 8 on my iphone 4s, my all music from iphone disappeared and cant sync with my itune from macpro. I tried all the suggestions. I dont see music folder in my settings also. So there is no option valid of deleting all music from my

After updating to ios 8 on my iphone 4s, all my music from iphone disappered. I tried all the suggestions, but I cant see music folder in the settings-general at all. I signed out of icloud as well, but still cannot sync with itune on my macbookpro. Can any one help?

Hello babichanjacob
Change how it syncs by enabling Manually manage music and videos, then you can drag and drop the music that you want on your iPhone. Revert it back to test to see if that resolves the issue.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My iphone 3gs is not activating after updating my software with i tunes...what shall i do? cant i go back to my normal version which was ios 4.1

my iphone 3gs which is not associated with this accunt is not activating after updating the sof tware, it connects to i tunes but i tunes says "we arh your unable to continue with your activation at this time, please try again later or contact customer care". my iphone aslo just says it cannot be activated or something like that every time i try. i have been waiting for 4 hours now but it still hasnt worked. how can i uninstal this update and go back to my old version which ws ios 4.1 or or ios 4,3. i dont even know what version it updated to, im assuming it is ios5 but not sure. it says try connecting to i tunes as well but it is connected and i tunes cant activate it either. my phone is connect to a wifi but it stll says no service.
i will really appreciate some help.
thanks.

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

TS1702 i updated to ios 6.1.3 and now i cant use my iphone 3gs after the update it keeps asking me to setup the phone as a new iphone and register on apple afresh but when i try following the steps they keep telling me they are unable to continue with the

please can someone tell me what to do so i can be able to use my iphone again after updating the ios 6.1.3 software i cant do anything with mt phone again apart from being able to make emergency calls. please help. at first it was a hearing problem when i recieve or make a call after the software update and now there is no way i could even do anything with it.

Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier?

I cant renistall my 10.5 after update to 10.5.3

Similar Messages

Maybe you are looking for