I cant save for web - please help me?!

It says:
"Could not complete this operation. An unknown operating system error has occurred."

Similar Messages

Psd turn into JPEG prewiews after save for web. Help!

save for web>save>save optimised as>save>close. That gives me a jpeg (the previous was a psd), but in the form of a preview thumbnail, top right corner bent, loupe and "JPEG" on it. I did about 20 psd just fine,ending in the folder as jpg images, keeping their previous names and the new "jpeg" underneath. What happened?
Not less odd, as I was shrinking the folder window, (bring in the bottom right corner, but this is probably not related), all the previous ones (the jpeg images) turned into preview icons, too. By moving the cover flow, they turned back into images, and by moving them again, they turned back into jpeg
icons, this time, not with the loupe and the photos, but with 3 geometrical shapes on them. If I bring them back into Ps CS3 and save for web again, and then close, I get a "save changes to the jpeg document?" question,>save, which gives me a regular save as window, and they stay images, and I could end the problem like that, but that might cancel the previous save for web. Help! goodnight now.

I guess I have been sending all along (my almost 2 years of photoshop) inflated pictures of images (which however I take the care of reducing to 1000
pixels from the original 4000 something that they originally are). What's odd for you guys, and normal for me, is that the computer went back to turning
out "normal" .jpg images, in small characters, like it has been doing all along, as if it went on a freaky spree yesterday, and I will probably go along with it, just because i don't know how to provoke deliberatly the JPEG with the loupes which appeared breafly yesterday, and that I am supposed to expect.
I don't have any third party add on (do you mean plug in?) Only GF, sitting there, unused for a year.
Of course now i am intrigued: Marion: what do you mean by :"this may be affected by normal Finder settings" ? Any settings that i can control to get those JPEG with loupes that I should expect all the time?
Thanks everybody, i'll just leave the thread open for a bit in case somebody wants to shed some more light on my state of confusion.

CS5 ''Save For Web & Devices'' Help

Hello
This is my 1st post on this forum, Hope its in the proper place
When i'm finished processing images on CS5 i click on ''Save For Web & Devices'' to save it & also to remove the EXIF image info, As of late though it has not been removing the info from the image when i click save. Anyone had any issues with this before, Any help on this issue would be great
Thank you

EXIF is a file format used by digital cameras to store metadata associated with an image.
This metadata can be any of several things:
date/time
f-stop
shutter speed
camera make/model
lens make/model
GPS location
Some photo libraries (such as Flikr) will display the EXIF data alongside the photo.

Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

Yes - well you have to make the file in a word processing Application.
You could use TextEdit (it's free) Pages (words only), or Numbers (data base) (they are part of iWorks - and may or may not be free (included) on your machine. You could use MS Office (it is not free) You could use any Open source word processor that plays well with Office (NeoOffice, StarOffice) they are free.
That's how you create content and copy/paste URLS. Then you save the file to the desktop. If you are going to make more than one file... you make a folder on the desktop and save, or drag the file(s) into it.
You attach it to your e-mail client which will compress it and e-mail it. An excellent reference is to use Help, from the menu bar, also from inside any application. From your library or book store the OS X for Dummies has a lot of useful information (you don't read it cover to cover but look up chapters about what you'd like to do)
You can also make appointments at your local Apple store for individualized help (if a store is nearby)

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices.

Help please with output settings in Save For Web Photoshop CS4

I am new to CS4 Photoshop so have been watching tutorials on Lynda.com. According to that tutorial I should have the ability to save a photo as an image in the Output Settings dialog box. The only options my panel gives me are:
HTML
Slices
Background
Saving Files
I don't have the option for Images Only or for HTML & Images. Are these two hidden somewhere?
I have been experimenting with Save For Web, but when I click on Save I get a panel that lists all the images saved in a folder named "Photos" but I cannot find in that folder any of the images that I optimized and saved for the web. Where are they to be found? Images that show up in Bridge are not my optimized images either.I would be grateful for some assistance with this.

Those settings, HTML, Slices, etc, are the Output Settings you don't normally need to change aonything in there.
Leave it at default and you will just save a version of the image stripped of unnecessary data and reduced to the degree you specified next to the file format choice.
When you press Save in the SfW interface it calls up a Windows OS Save dialog box showing the last used location.
The destination can be changed in the normal way. The Images you already saved will be in the the location that was in that dialog when you saved them.
There is a lot more information in the help pages on this topic! (Hint.)

Save for Web stopped saving @ 72 dpi. Help, please!

I am running Photoshop CS6 on Windows 7. I had two prior installations of photoshop on my system due to upgrades, so finally decided to unistall CS3 but kept CS5 just in case. Now for whatever reason, CS6 goes through the motions of the Save for Web dialog but doesn't change the resolution of the outputted file to 72 dpi. It keeps it at 300. It had been working perfectly until now. I went back in and tried it in CS5 and that still works fine. Any ideas? I'm getting so frustrated! Is there a setting somewhere that I messed up?
Thanks in advance!
Michelle

DPI is irrelevant unless you're printing. It's the number of pixels in the image which counts.
More pixels = bigger filesize.
On the web 100px x 100px is always the same size on screen (regardless of DPI which only comes into play when printing).
See if this helps
http://www.webdesignerdepot.com/2010/02/the-myth-of-dpi/

Photoshop CC2014: Can't use save for web option PLEASE HELP

Whenever I try and save a small animation as a gif (or anything in save ffor web) this happens http://prntscr.com/4gpseu This happened in CS6 I upgraded thinking it might fix it

As you can see from my screen capture I had no problem problem doing a 30 frame animation with Photoshop CC 2014. You screen capture looks strange. Your save for web screen capture shows frame 2 almost 8MP in size and all pixels are pinkish where the color map shows colors all a single gray for the animation no variation in color are all ??? You selected to only use 128 colors instead of the possible 256 and to do no transparency dither . Have you tried resetting your Photoshop preferences. I showed in my screen capture I was using CC 2014 had 30 frames in my frame animation. Showed what my Save for web looked like. Your Save For Web Capture looks very strange to me. Look at your's here then look a my screen capture. Even when I use the preset you chose GIF 128 No dither and a large image my save for web look nothing like your..

Save for web return an unknown error!! Please help

Whenever I press "save" on the save for web GUI this comes up. http://prntscr.com/4gpseu I really don't know what to do. I need to save a small animation (3 frames) as a gif. I'm on Windows 7 32 bit with Photoshop CC 2014.

You can use either AVI or MOV but MOV will give you a bit of lossless compression (small file size reduction over uncompressed AVI).
What I mean by lossless is try exporting to MOV, in the video settings set the codec to "Animation", keep the colors at RGB (Millions) or if you need alpha then RGB+Alpha (Millions+). Keep the quality set all the way to the highest. Then go in audio settings and choose anything you like. Export the movie.
Now take the very large MOV file it made into Adobe Media Encoder. Once it's imported, choose a preset (H.264, etc) and choose your desired compression settings. You will see there are a lot more compression settings. Also set your audio options. Then when you're done customizing your preset just click the green start icon and let AME compress your high quality source to a much smaller file size.
Just clarifying, after you import your video in AME and you choose your preset you have to click the presets orangeish hypertext to customize the presets settings. It will not overwrite that preset so don't worry about what you change. Pay special attention to the bottom of the custom settings panel because it lets you see the output file size. Adjust your quality controls until you hit the file size you want (both video and audio). You also have a preview panel so you can see the output at any part of the timeline using those settings.

CS4 PS crash in 64 bit Save for Web but not 32 bit - help!?

Anyone got any ideas please on how to stop Photoshop CS4 crashing on Save for Web in 64 bit version of Windows 7?
Running Windows 7, 64 bit Pro with both 64bit and 32bit versions of Photoshop CS4 installed.
The problem: I design a website, add slices etc as I've done for the last 10 years, go to Save for Web and as the dialogue box is opening and the blue bar at the bottom starts to show it loading, it gets just over half way and then crashes, saying the error message 'Adobe Photoshop CS4 has stopped working'. No solution available and then closes. Does this quite a few times (say 20-30%) of the time but not always. Tried the same PS document running 32bit version of Photoshop CS4 and it saves for web fine, never any crashes, only using the 64 bit version of PS. Need 64bit to take advantage of extra memory etc and one of the reasons the machine/ software combo was bought for.
Running a brand new (well about a month or so) Dell T3500 dual Xeon W3505, 12gb ram, Nvidia Quadro Fx 3800, Raptor HD etc built to run Win 7 Pro and CS4 Extended. I suspect the spec isn't to blame, checked all the hardware etc, no plugins that arent standard with a new install, so no obvious reason I can tell of as to why its not working. Not much else installed and started playing up before I installed other bits of software so doent make sense it might be other software cauing any problems.
Put a support query in and basically got told CS4 wasnt tested with 64 bit CS4 and directed to a possible support solution to 64 bit running on xp/ vista with general advice. No use whatsoever.
Firstly, anyone else having the same problem? Secondly, anyone know how to solve this? If its any help, I've pasted the Action Center info on one of the many crashes:
Description
Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CS4 (64 Bit)\Photoshop.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.1.0
Application Timestamp: 499bfd16
Fault Module Name: Save for Web.8BE
Fault Module Version: 11.0.0.12
Fault Module Timestamp: 48d3966d
Exception Code: c0000005
Exception Offset: 000000000007e1a0
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 2057
Additional Information 1: 9d66
Additional Information 2: 9d660f0d14b8fce02b9e5a9838f791c7
Additional Information 3: d5f3
The graphics card supports the new GPU features but tried with and without those turned on - still the same problem. Tried all sorts of preferences on and off but still no joy.
Would really appreciate any help/ advice on solving this.
Thanks.

Been reading up on that c0000005 error and in all the Operating systems it is a access violation. There are a lot of hits about windows 7 and software not being allowed local access and be saved that way too. What I think is that windows 7 is not allowing it for some reason in 64 bit mode or some security setting in the local needs adjusting?
I found this interesting fact
I was reading where testors were monitoring how windows 7 firewall allows DRM to run in the firewall. All the software they tested asked first for firewall permission (my software on my system asked first so know it is true on my other system). However, according to the testers, with PS CS4 the DRM does not ask to run with firewall premission. Windows 7 just bypasses the asking part and PS CS4 DRM gets firewall access.
Edit by me:
Google the offset code and your the very first to report it.

Help: Sudden save for web error in CS6

Hi everybody
Everything was peachy until yesterday evening – now (morning after) I started my computer, and suddenly 'Save for web' doesn't work anymore. When choosing 'Save for web' in the menu, the 'Save for web' window opens just fine, but no matter which settings I choose or change, as soon as I click the save-button, I get the following error: 'Could not complete this operation. An unknown operating system error has occured.'
I have not changed any settings since yesterday, I did not update either Photoshop or the system, and I tried restarting both Photoshop and the computer several times – no effect. I deleted Photoshops prefs, again no effect. I've seen people post their system-info, if you need to see that, I put it here
I'm on a MacPro, 10.8.2, with Photoshop Extended 13.0.4 (as part of CS6 Premium), x64
I also have CS4, CS5 and CS 5.5 on this machine, and just tested Photoshop 5.1 (12.1), and here 'Save for web' works just fine.
I can see from other posts in the forum that I'm not the only one with this problem, but I could not find an answer or solution to this.
Please help – I have a lot of work to do (involving 'Save for web'), and I can do that in an older version of Photoshop, but I shouldn't have to fall back on that, after having payed for and installed CS6.
Thanks in advance
Hans *troubled*

Delete the Save for Web prefs. On Windows this is in
C:\Users\Administrator\AppData\Roaming\Adobe\Save For Web AI\16.0
On Mac it's in
User:Hans:Preferences:Adobe
and so on.
Mylenium

Photoshop crashes when I try and save for web and devices. Making the image size smaller does not help.

I'm trying to make a lopping .gif from an animation that I made. It's 147 total frames. It's crashed about 6 times now every time I either try and Save for Web or even just save the document on my desktop so in case it crashes I can reopen PS and recover it. Making the image size smaller (original size is 1920 x 1080 with resolution 72) does not help, it still makes the *ding* error when I attempt to save. I made the image more than half of the original size and the Save for Web box actually came up that time, but when I tried clicking save it said there was an error and PS crashed without warning.

Look at the crash report for your Photoshop crashes see what they show

Illustrator CS4 - when I save for web my vectors are pixelated. Help!

I recently updated to CS4 (I know, I'm still behind the times) but ever since when I 'save for web' my vectors appear pixelated. It seems worse when I want a transparent background. My images are for web and this just won't do.
I've read a lot on this and can't seem to fix my problem, but here is what I have tried: Anti-Alias is checked, view > pixel preview, view > overprint preview, object > rasterize, and probably a few other things. If anyone can help me with this issue it would be GREATLY appreciated!! I've attached an image so you can see what I'm talking about. I created this schematic in Illustrator CS4 and saved for web with a transparent background and, as you can see, it appears pixelated everywhere.

I'm not sure what you're looking for but here is my save for web options. Let me know if you're looking for something else. And thank you for trying to help!!

Help Save for Web problem PE9 default gif setting

I have a 64 bit PC with Windows 7. PE9 and problem is when I "Save for Web" as a jpg....everytime I save a file it defaults back to the gif everytime. I want the default to be JPG!! I never use gif for anything. Pain in the rear to change the drop and setting to jpg everytime. I have a call tag in with no help yet, and have reinstalled PE9.Thanks in advance. Ray

It’s usually due to incorrect permissions settings on the OS.
Open Windows Explorer and navigate to:
C:\Program Files\Adobe
Locate the Photoshop Elements 9 folder (the one with the blue PSE logo)
Right click on that folder and choose Properties - then click the security tab and make the following changes:
1. Click on the edit button to change permissions.
2. Click Add and type the word “Everyone” in the Object names Box (without the quotation marks) and click OK.
3. Under group/User Names select everyone so that it becomes highlighted.
4. Put a check mark in the box against Allow Full Control and click Apply.
N.B. for Windows 64 bit navigate to Program Files (x86)
PSE should now remember you last settings rather than reverting to the default settings.

Help me using tools Save for Web?

I want to use tool Save for Web to compress image and upload to website KingShop.vn but unknow? Help me use it, pls.

Save for Web will create a JPG that has some things stripped out to make is smaller than a regular Save might produce, but PS doesn't upload to a website. That is something you'll have to determine from other sources, perhaps the website owner.

I cant save for web - please help me?!

Similar Messages

Maybe you are looking for