I cant scroll with the mouse in firefox, the scroll works with other apps

i cant scroll with the mouse in firefox, am using firefox 26

Open a new window or tab. In the address bar, type '''''about:config'''''.
There is a search bar at the top. Type '''scroll.m''' (scroll<'''dot'''>m).
The setting for
'''general.smoothScroll.mouseWheel'''
should be '''TRUE'''.

Similar Messages

  • With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

    With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

    From the fcp.co forum. See if this does anything for you.
    simon_hutchings
    OFFLINE
    Junior Boarder
    Posts: 24
    Thank you received: 5
    Karma: 1
    I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
    1. Open the application Audio Midi Setup (located in Applications : Utilities)
    2. Select the Output Tab for the current output device
    3. Select the Configure Speakers option
    4. Select the Multichannel tab
    5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked. 

  • I attempt to put the kindle app in my ipad I hit the button to install and nothing happens, this happens with other apps also. Any ideas?

    I am having a problem with my Ipad. I am trying to add the Kindle app to my ipad but when I hit the install button nothing happens. This occurs with other apps I try to add also. Any ideas? Thanks

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Apps are crashing. It started with The Daily, now it happens with other apps.  Any fixes?

    Apps are Crashing. It started with The Daily, now it happens repeatedly with other apps. Any fixes?

    Try these:
    1) Double-tap the home button and press an icon at the bottom until the minus sign appears. THen touch the minus sign on all the icons to kill the apps.
    2) Then, press and hold the home and power buttons for 10 seconds, until the apple appears. Allow the ipad to restart.
    If the problem persists, you may need to restore the ipad from within the computer's itunes program.

  • Every since ios8 my camera is not working with text or with other apps that worked flawlessly before. I just get a black screen when I go to take a photo.

    Ever since downloading ios8 onto my 5S the camera isn't cooperating with other apps--messages, Freshbooks in particular.  What's up with that? Very frustrating!

    MacBook Pro  / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
    I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better.  Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG.   However, after much searching, I finally did the steps in order and it worked.  
    This was after repeatedly downloading Silverlight from the Netflix site without success.  So here's what I did:
    1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
    2. Followed the directions. I felt like such an idiot for not doing it right before.
    3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
        [also check your Libary/ Internet Plug-ins, but the above search is faster]
    4. Drag it all to the trash and empty it.
    5. Go back to the Get  Silverlight page and click on the Install on that page, not the Netflix site.
    6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
    7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
    8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay!

  • TS1702 i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. pls help as am frustrat

    i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. it staarted again this evening, pls help as am frustrated. NB- i checked for apps update but all my apps are up-to-date. CT

    Try the usual steps: restart, reset, restore.
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT1414
    If restoring using a backup doesn't help, try restoring the iPhone to factory settings and try for a while with just the Apple-included apps, to make sure it's not an issue with a third-party app. If it still has problems, it may have a hardware problem and will need to be sent to Apple.
    Regards.

  • Un-confuse me: sharing images with other apps.

    Hi. I've gotten flummoxed (not unheard of) now that I'm using some of my images in other apps. I would like to understand all of the options/behaviors for moving images from Aperture to other apps.
    My confusion comes from at least three things
    . in Aperture, one has access to both the Master image, and the Version
    . the behavior may change based on the availability of the Master (is it on-line?)
    . Aperture keeps Previews of images, and uses these (sometimes) to share with other apps
    . this behavior changes based on the availability of the Preview (does it exist?)
    . the file format may or may not play a role in having the image show in another app.
    Is the shared image from the Master or a Version? Is it a Preview or something else? Does it have a file format, and if so, which?
    Here is a (partial?) list of how one can share images currently stored in Aperture:
    - Export via Export dialog (creates new file, user sets format and other parameters)
    - Mail direct from Aperture via "{Option}+e" or equivalent
    - Drag to the Finder (or Desktop)
    - Drag to another app
    - Open from another Apple app via the Media Browser
    - Open from another app via the "Media" category is the OS "File Open" dialog sidebar (How does one control what shows there?)
    - Open from another app via the OS "File Open" dialog and select a file currently tracked in the Aperture Library
    What are the differences?
    To cut this down to size -- here is my current need. I am starting to sketch using Autodesk's Sketchbook Pro. I would like to put an Aperture image on one of the layers. All I need is a good web-quality image (and I prefer to avoid large files). What is the best way to do this?
    The Media Browser is not available to Sketchbook Pro. The "Media" sidebar category is there, but often doesn't list Aperture, and often lists an Aperture Library other than the one I want (there does not appear to be a way to switch the Library shown).
    Thanks in advance.
    Kirby.

    FUQuestion: Is there an on-line source for learning/sharing inf. about using/customizing SBP? I am a natural media artist (viscous colored mud, a/k/a oil paint) who recently became passionate about photography, and just discovered drawing with a computer -- and I got baskets of questions about SBP (it is thrilling to use). The AutoDesk SBP forum is moribund. Additional thanks in advance for your answer.
    Kirby,
    I ran into SBP about 1-1/2 years ago when I found Painter to be filled with too much legacy code making it slow. I am an avid Illustrator fan and use it professionally, but it is not great for quick sketching. After checking out ArtRage, I decided to try SBP 2010. IMHO, it is the best program for quick sketching around, bar none.
    Since many consumers are just starting to become aware of it (outside of professional design circles), it may prompt more online resources to begin.
    There are some tutorials here (some or all of which you may already have seen):
    http://www.lynda.com/home/displaycourse.aspx?lpk2=62087
    http://area.autodesk.com/sketchbook/sketch2010prv
    And this link, which requires some additional clicks to land at the tutorial:
    http://www.carbodydesign.com/tutorials/2d/sketchbook-pro-tutorials/
    Here is an older site for the transitional period between Alias and Autodesk ownership:
    http://aliasdesign.autodesk.com/learning/tutorials/?product=7912&mode=7937
    Note - some of these tutorials are the same as other linked sites.
    A great place (IMHO) for art advice and technique is here:
    http://www.conceptart.org/forums/
    Hopefully, the program will promote more online resources for free.
    Have fun!

  • I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

    I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

    Likely because it's a not self contained and/or it's game and copy protected, so install it via the developers instructions instead, which likely means it will have ot be uninstalled off the first machine, the developer contacted for a new license key before installing on the newer machine.
    If you want it on both machines, you will need to likely buy another license.
    Most developers are fine with transfering license between machines, you have to contact them.
    They just want to make sure it's only on one machine so they are not getting robbed.

  • Edited clips will not open with other apps

    After editing video clips using Adobe Premiere Elements, clips will not open with other apps (like VLC, Media Player, etc...)

    Sherbowe
    Just saw your post and wanted to leave a just in case note.
    From the information that you and John T. Smith just exchanged, it would appear that you attempted to play back the saved project file (project.prel) with your VCL Player and Windows Media Player. You need to export the Timeline content to a file format that is supported by the player of your choice. By now, you have probably been there and done that.
    This is the just in case note about projects and their project.prel file....let us say that you have two separate projects and you decide to put the content of one project into another. Cannot do. One cannot import a project.prel into another project.prel. You would have to export the Timeline of one and then import that export in the other project. Alternatively, those with Premiere Elements 8.0/8.0.1, 9.0/9.0.1, and 10 could use the ClipMate program to copy/paste between programs without issues. However, with Premiere Elements 11 there are some problems in that regard.
    ATR

  • Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps but the rear camera is not working, all other apps work perfectly well, how do i resolve this

    Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps (such as facetime and skype) but the rear camera is not working, all other apps work perfectly well, how do i resolve this

    Double tap Home button and delete Camera app from multitask-list.
    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    If problem persist, make an appointment with genius bar for evaluation.

  • ISight not working with other apps

    I've currently been having a problem with my Intel iMac (specs in signature) since the iSight works with iChat (the green light turns on and everything), but it doesn't work with other apps such Delicious Library or Photo Booth. I also have a Windows XP partition on here, and it works just fine.
    With Photo Booth, I just get a green screen and no message. On Delicious Library I get a white screen and no message either. I've tried deleting the .plist file for Photo Booth, but that hasn't worked. Any ideas on how to fix this issue?

    If nothing above solves your problem, try all relevant suggestions from http://docs.info.apple.com/article.html?artnum=93240
    If the problem continues, you may have a hardware or software conflict. Some users report that plug-ins installed by Delicious Library cause conflicts with iSight.
    If your problem remains after trying all relevant Troubleshooting suggestions, uninstall D/L (or at least remove any QuickTime plug-ins D/L installs) to see if your system has a D/L conflict.

  • Follwing query fails on one database, but the same works on other Database

    Hi,
    The following SQL fails on one database with ORA-01722 but the same works on other database.
    SQL> SELECT i.version, d.name, i.instance_name, i.host_name
    FROM v$instance i, v$database d, v$parameter p 2
    3 WHERE p.name = 'instance_number'
    4 AND DECODE(p.value, 0, 1, p.value) = i.instance_number;
    AND DECODE(p.value, 0, 1, p.value) = i.instance_number
    ERROR at line 4:
    ORA-01722: invalid number
    both databases are at same version (10.2.0.1) both are on same machine.
    Initailly I suspected NLS settings, I am surprised to see NLS settings are also same on both the databases.
    Any thoughts why is it happening

    Thanks for the reply
    Yes, i know that i am comparing varchar against number.
    bu there is no way that the database where the query is working has correct types on both sides as the tables are standard oracle dictionary tables.
    Yes, i tried this earlier, it works
    AND DECODE(p.value, '0', '1', p.value) = to_char(i.instance_number)
    it is very weired to see that error, i feel it something else that causing the trouble.

  • Can I use built-in iSight camera with other apps?

    Can I use built-in iSight camera with other apps?
    How?
    doesn't work in imovie or image capture

    Hi Judson,
    THe built in iSight will actually work with iMovie if you have the version of iMovie which comes with iLife 6. (see http://docs.info.apple.com/article.html?artnum=61929 for a mention)
    There is a slightly clumsy "workaround" available for use with earlier versions of iMovie, but you need a dv cam to use it - see http://www.macosxhints.com/article.php?story=20051217210335199
    I gather that "EvoCam" - http://www.evological.com/evocam.html - will also work directly with the built in iSight.
    So too, should recent versions of QuicktimePro.
    As for other apps, tell us what you wish to do with it. We may be able to come up with some suggestions.
    Cheers
    Rod

  • Photo Booth will not open.  My camera works well with other apps.

    Photo Booth will not open.  My camera works well with other apps. 

    try running it in either 32 or 64bit mode and see if this changes the experience. Locate the icon in Finder, right click "get-info" on it and see the checkmarks "run in 32bit mode" ..
    on Lion some users had trouble opeining pb when "iglasses" was installed, also a thing to check.
    Else repair permissions of the disk, using Apples disk utility app.

  • "could not start the camera. Close other apps and try again"

    It shows up saying could not start the camera. Close other apps and try again when i try to open the camera but no other apps are open.
    how do i fix this?

    Hi.....i am new here and is not sure as yet how to start a new thread. 
    I have a bb curve 8310 and think i may ave caused my camera to stop working via uninstalling it....if that is possible. 
    wen i click on di camera it opens, makes shutter sound and flashes wen i click di trackball but after that it doesnt show di picture that it supposedlt took.
    Before this happened i was foolin around with the hide a folder option in pictures and not sure what i did wrong.......my video is not clear either.....please can you help me .....in addition i do not get any of those messages that i see the other users saying that they got for example could not start camera....i am not getting anything like that. all dat i get is a white screen......

  • Hi im staying in UAE, why doesnt my interactive notification work with other apps like facebook?

    why doesnt my interactive notification work with other apps like facebook?
    its only working with the message app notifications.

    Sounds like the iPhone is carrier locked with Vodafone and if so, it can't be used with another carrier's SIM card.
    If so, only Vodafone can officially unlock the iPhone or send the unlock request to Apple.

Maybe you are looking for