I cant see facebook notifications in the notifications bar on mountain lion?

i cant see facebook notifications in the notifications bar on mountain lion?

Hi All,
Go to System preferences, and click on Mail, Contacts & Calenders. Click on Facebook and sign in.
Then go back to Notifications and you will see it now says '...share button allows you to post to Twitter and Facebook' --- Check your notification center.
S

Similar Messages

How can I see the entire url in the address bar in Mountain Lion including the http or https?

I recently updated Safari and now when the url of the site I am visiting shows up in the adress bar...it is minus the http or https so I am unaware fo whether the site is secure or not. How can I enable Safari to show me the entire url each and everytime I visit a webpage? Like before??

Users can revert to the old behavior by setting '''browser.urlbar.trimURLs''' to '''false''' in '''about:config'''. 
 
 
To change this preference: 
 
type about:config in the Location/URL bar and press Enter. 
if you see a warning, accept (promise to be careful) 
Filter: browser.urlbar.trimURLs 
in lower panel, double-click that item to toggle value to false

The options tweet and facebook disappeared from the notification bar! What do I do?

The options tweet and facebook disappeared from the notification bar! What do I do?

Any restrictions set up in Settings/General/Restrictions?

I got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i c

i got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion
but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
any ideas ?

Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

TS1717 when I open iTunes cant see my iphone on the left side like usual to sync music to it. HELP?

when I open iTunes cant see my iphone on the left side like usual to sync music to it. HELP?

Hi catquin,
If you are having issues with your iPod Shuffle not being recognized by iTunes on your Windows machine, you may find the following article helpful:
Apple Support: iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden

HT1296 cannot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

i canot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

i have done this on my ipad mini and my imac but they are still not syncing. my iphone 4 has the icloud symbol but it seems to be unresponsive to touch, I cannot get it to highlight or turn-on. Bit confused.

TS1424 Bought and Album and one song is missing after itunes froze cant see how to dowload the missing song as it says Purchased

Bought and Album and one song is missing after itunes froze cant see how to dowload the missing song as it says Purchased
Pls Help Best and Kind Regards

Depending upon what country that you are in (music can't be re-downloaded in all countries) then see if it shows under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunee. If it shows there but doesn't have the clpud symbol against it for redownloading then is that track listed in the Music part of your library i.e. where you would click on it to play it ? If it is then delete it from there and it should then get the cloud symbol against it in Purchased.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com . iTunes Support should reply within, I think, about 24 hours.
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My macbook pro's cam isn't work well, in facebook skype, my partner can see me but i can see him, i have just update OS X Mountain lion

in facebook skype, my partner can see me but i can see him, i have just update OS X Mountain lion please help me, im just thinking in downgrade to OS X Lion

It seems Mountain Lion has a lot of bugs. I had to replace the hard drive after the upgrade and many had the same problems that required a disk replacement.

My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?

My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?

Use the manual methods.. but it is possible for TM to wipe the old files in trying to fit into the space.
Try Q16.. but read all the section 14-17
http://pondini.org/TM/FAQ.html

Why do I see about:blank in the address bar when clicking a link within an email item in my yahoo mail account?

I have Os X and Firefox 4. When I click a link in an email in my yahoo mail account, the address bar first shows about:blank and then goes on to obtain the address of the link. Is this a virus, or hacker, or what? Thanks for your help.

You only see the URL after Firefox has made a connection. 
During the initial state you see about:blank in the location bar.

I have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

i have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

You'll need to upgrade to Parallels Desktop 7 to regain compatibility. Good luck....
On Edit: A minute late!

If you've installed the Mac OS X Mountain Lion and want to restore your MacBook to factory settings, what do you do?

Havinig a lot of problems with my MacBook since I've upgraded to the Mac OS X Mountain Lion program. Can someone tell me if it's possible to reset my computer back to factory settings?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Has anyone else noticed since the last update to mountain lion, if you pit it to sleep, when it wakes there is no sound. you have to reboot to get sound?

I have found, in the past few days, since the latest update to Mountain Lion, if the Mac is put to sleep, there is no sound available when it wakes. I have to re-start to get sound back. Is this general??

Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

While partitioning in Lion 10.8, I get the following error message: I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message: DiskManagementTool has died

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

This copy of the Install OS X Mountain Lion application can't be verified. It may have been corrupted or tampered with during downloading. Dr Nir Hus

Downloaded latest OS X and installed on my Mac Book Pro (early 2008). No problems.
Then attempted to install on my Mac Mini 2011 and continuously getting the following message:
"This copy of the Install OS X Mountain Lion application can't be verified. It may have been corrupted or tampered with during downloading."
I noticed that I am not the only one...
Anyone with a solution.
So far all I see are various attempts by people, some successful others not.
This should not be a frustrating complicated ordeal!!!
Dr Nir Joseph Hus MD., PhD.
General Surgery,
Trauma Surgery Critical Care.

Yup, the safe mode/repair/redownload/install finally solved it - had to do it after midnight as all the 4gig downloads have already trashed my 60gig internet limit for this month, installed REALLY slowly bugt eventually at 0330 i had working Mountatin Lion on my Macbook.
This has to be the most tedious upgrade, Mac OR Windows, I've ever done. Takes me back to inserting 15 floppies for sheer inconvenience, and from the numbers reporting this problem, it's more than an occasional glitch. And for some reason the download always fails if left unattended, even if all the sleep modes, etc, are negated.
3/10 to Apple this time around.

I cant see facebook notifications in the notifications bar on mountain lion?

Similar Messages

Maybe you are looking for