I cant see portal content using ie8

Hi all,
I cant see portal content in ie8, but i cant able to remove ie8 from my system i tried but it wont possible. would any body please help me on this issue.
Thanks
Anu

Anu,
You got to verify your portal version and sp level against the once mentioned in PAM http://service.sap.com/pam
Also, refer to the thread in [here|Does SAP certify IE 7 with Portal v.7? what about IE 8?; for more details.
Thanks and regards,
Sandeep Tudumu

Similar Messages

Couldn't see portal content

hi all:
I couldn't see Portal Content under the link of Content administration --> portal content
even with the role of pcd:portal_content/administrator/content_admin/content_admin_role, I
should have seen some content like content from sap and so on ,
can you please tell me what should I configure?
thank you very much .

Hi Jingying
You need to assing content_admin_role to content admin role.
System Administration >> Permission >> Portal Content >> Content Provided By SAP >> Admin Content >> Content Administrators >> Content Admin >> Right Click on Content Admin Role >> Open Permission >> search and assign content_admin_role role and provides access if you are only assin content admin role to the user.
Otherwise you can assign super administration role to the user.
Hope it helps
Regards
Arun

Unable to open yahoo mail -cant see mail content

unable to open yahoo mail on mozilla -cant see mail content though i can see the details on Internet explorer. what may be the problem kindly help

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Help! -Itunes wont sync, Set-Up Assistant pops up, Cant see iPod contents..

I have several problems happening at once - please help if you can!
When I connect to iTunes, my iPod starts to sync, but then I get an error message "Cannot synchronize ----'s iPod. Unknown Error (-48)"
It then jumps straight to the Set Up Assistant, as if its the first time I've connected my iPod! (I've had it for a year now). I'm too scared to go through that option in case it wipes the music/video off my iPod.
After all this, my iPod's name Imine) is actually visible in the left side panel of iTunes - BUT, i cant see any of the contents ie songs, video etc.
Funny thing is, I can still load songs & video onto the iPod, and it synchronizes and saves. But, I just cant see anything thats on the iPod (meaning I cant edit or delete, which is annoying), as iTunes only recognizes it as a brand new ipod.
So, what can I do?
I've tried to reset the Ipod, and reloaded iTunes. I've even used an earlier version of iTunes on a different computer and the exact same thing happens there (which leads me to believe somehting happened to the iPod).
I dont want to restore the iPod - I have nearly filled the 160GB capacity and I simply cannot back it up anywhere as no computer i have has enough memory and all my original music is overseas at home.
Why is itunes not recognising the ipod, but it still saves data on it??? How can I bypass the Set Up assistant?? (its irritating).
Please help!!
JJ LA

I am also having the same problem. This is my second ipod (I've added a shuffle and already had a nano). The nano works fine. When I connect the shuffle, it is grayed out in the left pane. The main view only shows two tabs, Settings and Contents. It doesn't seem to matter how I have the syncing setup.

I cant see the content of my icloud

Hello everyone. i have iphone 4 whis ios702 i bought from someone else. i think i've synced photoes to my cloud (i dont know if when i had ios 6.14 or after updating to ios 702)
any way my cloud i occupied with 3.4 giga that i cant see.
what should i do? should i delete the icloud content from my phone?
if yes, how am i doing it?
iPhone 4, iOS 7.0.2

orisharonn wrote:
i tried to compare between camera roll to photoes collections by years->month... i seems that almost every thing is in both- photoes and camera roll. whay is that???
The reason you see the same photos is that they are just differerent ways to view the same photos. In the broadest view, they are organized by year. If you "zoom" into a year, you will view them by "collections", which are only a month or two. Zoom into a collection and you will see "moments", which is the shortest time period. If you don't like viewing your photos this way you can always tap Albums at the bottom, the tap Camera Roll and you will see you photos as they were in iOS 6. None of this means you have duplicate photos, they are just different ways to see the same photos.
as i said, i prefer to backup pics and videos to my pc and to the cloud only apps data (like recordings of stuff)
or whatsup conversations, and my contacts....
You can do that by importing them to your computer using your usb cable and and turning off the camera roll in your backup options (in Settings>iCloud>Storage & Backup>tap your device under Backups>turn of Camera Roll under Backup Options). As fromsouth said, this will not delete anything from your phone, it will just prevent the camera roll from being included in your iCloud backup. And you will not see the reduction in your iCloud storage until you back up with these new settings a few times (or delete your existing backup and back up again).

Users cannot see Portal Content

Hello,
I have installed netweaver 7.01 portal and after installation, I have created users with Content Admin role.
But these users are still unable to see the Portal Content folder. Only administrators are able to see the portl content.
What's wrong? Am I missing something hre?
Thanks.

Hi,
Login as Admin user, go to Content Admin -> Portal Content -> You need to right click on Port Content folder and edit permissions.
Here, search for the Content Admin role and add it to the permissions list. Then, assign Full Access permissions under Administrator column and check the boxes under End user and Role assigner.
Now, the users with the content admin role should be able to see the portal content.
Hope this works.
Shitij

Error importing Portal Contents Using EP 6.0 SP15

Hello,
We were importing portal contents on one server from the other.
Out of those, only 2 were imported successfully.
But other got an error as follows:
Error Details
Cannot import in text only mode: object portal_content/com.mcgm.xxxx/com.xxxx.PortalDisplayComponents/com.xxxx.complaints/com.xxxx.fcomplaints_main/com.xxxx.fiViews/com.xxxx.iImportantContacts does not exist.
Object ID:
pcd:portal_content/com.xxxx.xxxx/com.xxxx.PortalDisplayComponents/com.xxxx.complaints/com.xxxx.fcomplaints_main/com.xxxx.fiViews/com.xxxx.iImportantContacts
Transport
File: /usr/sap/CPD/JC01/j2ee/temp/pcd/transport/IMPORT-0807_144931_226_209eb21d06845d2f/EPT/com.xxxx.iimportantcontacts.ept
at com.sapportals.portal.pcd.gl.transport.PcdGlTextTransportManager.importObject(PcdGlTextTransportManager.java:103)
Could anyone guide us regarding it?
Thanks and regards,
Pradnya

Another thought about this :
It's the deserialization that fails saying that the <DisplayName> child of <response> is not defined in the schema. Shouldn't we read that as follows : the response received indeed does include a tag named <DisplayName>, but there is no way of mapping this to the class structure of the generated proxy so that this value can be used to rehydrate an instance of that class with it.
Now, if we look at the WSDL file for the UME Web Service we find this for the GetUser0 method's response message :
- <wsdl:message name="getUserResponse">
<wsdl:part name="response" type="tns0:IUserInfo" />
</wsdl:message>
The response is of type IUserInfo. This type is defined in the WSDL file as outlined below :
- <complexType name="IUserInfo">
- <sequence>
 <element name="DisplayName" nillable="true" type="xsd:string" /> <element name="Locale" nillable="true" type="tns1:Locale" />
<element name="Title" nillable="true" type="xsd:string" />
<element name="Groups" nillable="true" type="intf:ArrayOf_xsd_string" />
<element name="UniqueName" nillable="true" type="xsd:string" />
<element name="Roles" nillable="true" type="intf:ArrayOf_xsd_string" />
<element name="Email" nillable="true" type="intf:ArrayOf_xsd_string" />
<element name="UniqueId" nillable="true" type="xsd:string" />
<element name="FirstName" nillable="true" type="xsd:string" />
<element name="LastName" nillable="true" type="xsd:string" />
<element name="Company" nillable="true" type="xsd:string" />
</sequence>
</complexType>
The WSDL definition for IUserInfo clearly does have this elment.
Another thing : I'm using the exact same web service from a .Net web service client. The proxies generated with the Visual Studio .Net tools do not throw this error. Which raises the question : is it indeed a WSDL problem or is there a bug in the proxy generation in NW DS ?

Cant see JTable content

Hi,
 private DefaultTableModel spieleTableModel = new DefaultTableModel();
 private DefaultTableModel teilnehmerTableModel = new DefaultTableModel();
 //SpieleTable
 spieleTableModel.addColumn(" Nr.");
 spieleTableModel.addColumn(" spielName");
 spieleTableModel.addColumn(" maxSpieler");
 spieleTableModel.addColumn(" angemeldet");
 spieleTableModel.addColumn(" gestartet");
 spieleTableModel.addColumn(" Eigner");
 spieleTableModel.addColumn(" -IP");
 jtblSpieleListe.setModel(spieleTableModel);
 //teilnehmerTable
 teilnehmerTableModel.addColumn(" clientId ");
 teilnehmerTableModel.addColumn(" Nr. ");
 teilnehmerTableModel.addColumn(" spielName ");
 teilnehmerTableModel.addColumn(" spielStand ");
 teilnehmerTableModel.addColumn(" hostIP ");
 teilnehmerTableModel.addColumn(" threadName ");
 teilnehmerTableModel.addColumn(" Eigner ");
 teilnehmerTableModel.addColumn(" PW ");
 jtblTeilnehmerListe.setModel(teilnehmerTableModel);
 // adding data
 public void spieleTableSatzAnhaengen(
 String spielNummer,
 String spielName,
 // more param
 int row = spieleTableModel.getRowCount();
 spieleTableModel.addRow(new Vector() ) ;
 spieleTableModel.setValueAt(spielNummer,row, Jobs.COL_NUMMER);
 spieleTableModel.setValueAt(spielName, row, Jobs.COL_NAME);
 // more}
 public void teilnehmerTableSatzAnhaengen(
 String spielNummer,
 String spielName ,
 // more param ){
 int row = spieleTableModel.getRowCount();
 spieleTableModel.addRow(new Vector() ) ;
 spieleTableModel.setValueAt(spielNummer, row, 0);
 spieleTableModel.setValueAt(spielName, row,1);
 // more
 } My problem I cant solve is:
with spieleTable I can see rows and cols but not with teilnehmerTable
a console output shows that values received ploperly the table.
It seems that I am doing something like painting white on white ( ?? ).
But I eve do not see lines .
What I can see are tableheaders.
ANy hint, where I could look for.
TIA Hanns

Eh, is your teilnehmerSomething method erroneously
manipulating the spieleTableModel instead of the
teilnehmerTableModel?What a shame, I did not see this <g>
thanks and enjoy YOur DD
Hanns

Cant see external devices using firewire in Final Cut HD

After installing iLife anad iWork I stopped being able to import from an external device over firewire using Final Cut Express 2. I upgraded my OS to X 10.4.7 and that didn't help. I upgraded to Final Cut HD 3.5 and that didn't help either. I am able to capture in iMovie just fine. Any help would be appreciated.

Hi(Bonjour)!
Did you update quicktime over a previous version?
There are some issues with some computer configuration, firewire, iMovie, FCE and QT 7.
See:
http://docs.info.apple.com/article.html?artnum=301852
Good luck!
Michel Boissonneault

Cant see all devices using airport utility

why is it that when using windows xp and wired ethernet i can not see all apple devices using airport utility? If i switch to wireless i can see all of the devices just fine.

To view Ethernet devices you need to use AirPort Utility 5.6. This can be installed using this method:
http://frank.is/mountain-lion-and-the-old-airport-utility/
Download the Automator workflow.

Smartform new version - i cant see the styles used from Smartstyles

Hello all
I got a new computer with new SAP GUI.
I just found out that the text editor displaying a text element does not show the character (or paragraph) style defined in related Smartstyle object.
anybody could help where to change related view settings?
thank you
Imrich

Hi ,
What vijay said is correct,
we could not find paragraph formats in text editor,
We need to give the smart style name form attributes(Output Options).
So that we can usee all the paragraph formats which are created under smart style
if Smartform is displaying Word docuemnt than that shows the paragraph formats which are in Smart style.
Thanks
Surendra

Cant see sequence content in CS6 Premiere. Hardware issues?

Bill Hunt told me to try you guy's in this forum.
Hope someone here have an ace up their sleves....
Read the thread here: http://forums.adobe.com/message/4925266#4925266
Post here or in that thread if anyone have suggestions!
Thanks!!

I really hope that someone have some help in this matter.
I did a clean install of latest nVidia drivers and the same problem.
If I cut and copy files that I think is is where they should be into a new timeline the problem follows to the new timeline. Sometimes clips apear when mouse over and sometimes they go away. What is going on?

Move KM content using CTS+

Hi,
We are looking to move portal content using CTS, now we know that we can move EPA files without any problem and also we know that the CTS documentation for portal mentions that :
"Documents and configurations of Knowledge Management and Collaboration (KMC) are not part of the CTS+ concept at the moment. Mechanisms for supporting KMC are planned for the future. Documentation will be provided."
Anybody know when this will be supported? and if there is anyway to make it work within the current support package level SP12.
Thanks in advance for your help,
Zareh Vazquez

Hi Zareh,
this is coming in SP13.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/7217

Remove Portal Content Directory From Personalization window

Hi,
I have requirement... we have a home page, which contain a set of iview and page. When logged in user personalize this page, he is able to see portal content directory and its folder structure provided he has end user permission.
Is there any option to avoid displaying folder struture. Or is there any option to hide portal content directory in personalization even user has end user permission.
Regards
Baby

Hi,
please check your permissions of the PCD. (Right click on folder -> open -> permissions)
End Users can only see PCD folders which have the "End User" flag enabled.
All permissions are inherited by successing folders. So don't set the End User flag in general.
Additionally check this discussion:
Best regards,
Olaf
Edited by: Olaf Böttcher on May 11, 2009 1:46 PM

Tools for Developing portal content

Hi Experts,
Do we have any other tools like WEB PAGE COMPOSER for developing the portal content ?
Thanks
Suresh

Hi Suresh,
There are options which you can avail for creating portal contents.
1). SAP NetWeaver Developer Studio.
Based on open source Eclipse IDE & looks very essential for extensive Java projects and supports standard technologies as well from the SAP technologies & the Infrastructure as well.
Can work well in both Java & ABAP platforms as it supports different perspective for both of them.
2). SAP Enterprise Portal Developer Kit (PDK).
It is a collection of information, samples & tools for use by developers.
Sample Applications include Portal Data Viewer, OBN, WebDynPro, HTMLB, EPCF & few more.
3). SAP NetWeaver Visual Composer.
It is a powerful tool for creating the Portal contents using a visual interface rather than stressing more on writing code.
Hope this gives you a fair idea.
Do reward points if found helpful.
Thanks & Regards
Gourav.

I cant see portal content using ie8

Similar Messages

Maybe you are looking for