I cant send attachments or pdf s im using a 3070 a deskjet

ican send messages via eprint but no pdf s or attachments im using a 3070a deskjet

Hello djcconlon,
I commented on your other thread located at the link below. Please advise if this thread is referencing a different issue.
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/i-can-send-messages-but-i-cant-send-attachment...
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

  • Want to get email on PC & Note3 but when Note3 on, cant send password on PC - says [IN-USE] account is locked by another session

    I have email ([email protected]) on my PC that always worked fine. I bought a Samsung Galaxy Note3 and put my email on it too. Problem is that when my Note3 is on, I cant login to my PC email - I get this message: "Sending of password did not succeed. Mail server mail.charter.net responded: [IN-USE] account is locked by another session or for maintenance, try again."
    How can I configure Mozilla so I can run both? I know it's a Mozilla problem because when I go through the internet on my PC (not through Mozilla) and login, I get my emails.

    go through the internet to your Pc! How exactly do you so that? and get your mails without Thunderbird again how exactly.
    And finally have you asked charter how many connections to their mail server your allowed to have at once? If it is one You have a serious problem.

  • Send Mail with PDF as attachment using Simple mail Option to multiple addre

    Hi all,
    I have a requirement to send the form as attachment to the multiple addresses maintained.
    I want to know the procedure to retrieve all those addresses.
    I am aware of the complete procedure of getting the OTF and and converting to PDF and the sending using API function module.
    Please help me in getting the addresses.
    Regards,
    Vivek

    Hi,
    I use the following code to get all of the email addresses attached to a vendor...
    * Find the partners email address (this should be a vendor)
      select single adrnr into lv_adrnr
        from lfa1 where lifnr = nast-parnr.
      select smtp_addr flgdefault
             adr6~date_from adr6~consnumber remark into table lt_email
        from adr6
         left outer join adrt
            on  adrt~addrnumber = adr6~addrnumber
            and adrt~persnumber = adr6~persnumber
            and adrt~comm_type  = 'INT'
            and adrt~date_from  = adr6~date_from
            and adrt~consnumber = adr6~consnumber
          where adr6~addrnumber  = lv_adrnr
            and adr6~date_from  <= sy-datum
          order by adr6~date_from adr6~consnumber.
    Darren

  • I cant send attachment in yahoo with new mac os x 10.8.2

    i cant send attachments with the new mac os 10 .8 and asafari please help

    romanlaw wrote:
    yahoo help is of no help at all!!!!!!
    Then why not answer the question,
    Can you send using a different browser (regardless of whether you want to) YES or NO

  • How do I send attachments (documents) as a PDF?

    How do I send attachments (documents) as a PDF?

    <http://support.apple.com/kb/HT2500>
    Look for "Adding attachments and photos".

  • How to send smartforms as pdf attachments with e mail

    hi experts,
    how to send smartforms as pdf attachments with e mail???
    nitin

    Hi
    In the FORM Interface put proper parameter. Hope this helps.

  • Can´t send emails with pdf attachments - why?

    Since i moved all my accounts to my new airbook (OS X 10.8.2) everything works fine BUT i am not able to send emails with pdf attachments.I have an exchange and a mac.account - but they both won`t work.
    The emails stay put in the local ausgang? exit box and won`t move away unless i delete them.
    i checked the accounts, the activity - all says it works fine - but it doesn`t!
    Maybe in the *deep* of my mac is one thing that says no pdf - but where can i find it?
    I appreciate every helpful hint :-)
    greetings

    it tries to send the email for about five minutes and than gives the message *server doesn't work* you want to try another? repeat? or later?
    when i change the server e.g. from exchange to mac - tries again and without further notice i find the message in the outbox - even when i click that one and *send* again - nothing changes......
    I already tried to name the attachments in.pdf - i also change the pdf to jpeg - nothing works - all emails i write after that go immediately to the outbox - so when i want to send messages at all i need to delete the ones with the attachment or send the other ones manually
    Please notice in the activity window there is a lot of traffic :-) but it doesn`t help
    i even closed all other programmes like excel,safari and stuff - but still
    and i still have al lot of free GB on my airbook....
    any idea????

  • Cant send emails with attachments

    All of a sudden I cant send emails with attachments from my iphone or iPad.
    Has anyone else had similar issues?
    I have deleted and reset the accounts up and also tried different devices all with the same problem.

    Please find the trace below . Also I am able to browse the share but haven't tried writing a test app.
    javax.mail.MessagingException: IOException while sending message
    at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:595)
    at javax.mail.Transport.send0(Transport.java:169)
    at javax.mail.Transport.send(Transport.java:98)
    at SendEmail.sendMail(SendEmail.java:66)
    at FetchDetails.fetchResultSet(FetchDetails.java:69)
    at FetchDetails.<init>(FetchDetails.java:36)
    at Index.main(Index.java:3)
    Caused by: java.io.FileNotFoundException: \xxx.xxx.xx.xxx\dinesh\dialog.gif (The
    system cannot find the path specified)
    at java.io.FileInputStream.open(Native Method)
    at java.io.FileInputStream.<init>(FileInputStream.java:103)
    at javax.activation.FileDataSource.getInputStream(FileDataSource.java:80
    at javax.activation.DataHandler.writeTo(DataHandler.java:287)
    at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
    at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:747)
    at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:361)
    at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:85
    at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:83
    9)
    at javax.activation.DataHandler.writeTo(DataHandler.java:295)
    at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
    at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1673)
    at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:555)
    ... 6 more
    Cant send mail. IOException while sending message

  • How can I send a large pdf file (42MB) attachments by icloud ??

    How can I send a large pdf file (42MB) attachment by email in Icloud ???

    That's a bit excessive.  The website http://convert.neevia.com/pdfcompress/ can compress files up to 5 MB in size. You may want to print to PDF single smaller pages, or print the document and scan it one page at a time to PDF, and then use the PDF compress tools to shrink it further.

  • Iphone - cant send mails with attachments

    Hi,
    We run exchange 2007 & I have my account setup on my iphone but mails with attachments wont send they just sit in the outbox. Now other users in job have nokia E63 which they can send attachments without problems.
    Both would use activesync but presume maybe in a different way & that i just might need to make some change on exhange.
    Anyone have any ideas?

    Turns out a couple of components of AVG were causing the problem. Please see http://www.avg.com/us-en/faq?num=3254#tba7

  • HT5275 With Safari version 6, I cant send emails with attachments (e.g. photos, word documents) using my Yahoo Account. How can I solve this?

    I recently updated my safari to version 6. After having updates, I found out that I cant send emails with attachment. This is only with my Yahoo Account. I used my Yahoo Account more often than my other emails, can someone help me fix this?
    Thanks.

    frannbug wrote:
    Well, I copied and pasted it into a message to Apple's feedback; but I'd still be interested in hearing how others may have found work-arounds to the problems I've described here.
    You may wish to post a more concise description of what you are asking.

  • Cannot send attachments in Mail using .mac account, pop account is fine!

    Within my Mail.app, I have 2 accounts: one is a .mac account, the other a pop account.
    When I send attachments (jpg always and sometimes pdf) with the .mac account, they do not get encoded properly and my recipients cannot view them -- or they can view, say, 10% of the photo.
    When I send the same attachments with the pop account, and within the same Mail.app, I do NOT have this problem.
    Furthermore, if I send the attachment from my .mac webmail, I do NOT have the problem.
    Does Mail.app have a problem with attachments sent via IMAP accounts?
    I have tried Repairing Permissions, deleting the outbox.mbx (and emptying the trash).
    Does anyone have any other suggestions? This is driving me crazy.
    I am running Mail 2.0.5 on Tiger 10.4.3
    Thanks a lot in advance, Neil
    Long live the sunflower iMac, iBook G4   Mac OS X (10.4)  

    Hello Neil.
    Does Mail.app have a problem with attachments sent via IMAP accounts?
    None that I'm aware of.
    The Mail.app uses MIME 1.0 for message/attachment encoding (which is the internet standard) for all email accounts.
    Is your POP account and the SMTP server used for the account provided by your ISP used for connecting to the internet?
    If so, try selecting/using your ISP's SMTP server (the same SMTP server used to send mail via your ISP's POP account) to send mail via your .Mac account as a test.

  • How do I create a submit button for my form? I would like it to send the completed PDF to an email address

    Hi everyone,
    I recently upgraded to Adobe XI and I can't find a "submit by email" button for my form. I created a button and tried to set up some actions but, I can only get the button to direct the user to a URL. How do I make it send the completed PDF to our designated company email address? I'm not too familiar with JAVASCRIPTS so I haven't tried that plus I heard it may not work with users with adobe reader.
    Any help would be appreciated.
    Thanks,
    Matt

    Thanks for the input. I think you might have a different version of LiveCycle than the copy I have since it looks a little different. However, I found the answer in Adobe help. I had to type "mailto:" before the email address to indicate it's an email and not a URL. See below.
    To collect form data as attachments to email, type mailto: followed by the email address. For example, mailto:[email protected]

  • Send smartform as pdf attachment through Email on ECC 5.0

    I have been trying hard to do this, but am not able to send attachment. Below are the problems -
    1. If sometimes the mail goes, the attachment is empty.
    2. if i use COMMIT_WORK = 'X' in FM SO_NEW_DOCUMENT_ATT_SEND_API1 , it throws a dump - ' Invalid COMMIT WORK in an update function module.'
    3. If i comment COMMIT_WORK = 'X', it gets executed successfully but, in the program i get a dump 'UC_OBJECTS_NOT_CHAR' exception.
    Can someone suggest, what settings are required in SAP to send smartforms as PDF attachments. Also, please suggest how can i remove the dump. If anyone can give me a working program, it will be very very helpful.
    here is the code,
    REPORT  zrsmfmail.
    TYPE-POOLS: addi.
    Tables defination.
    TABLES : vbpa,vbak,nast, stxl, stxh.
    Data Decleration .
    DATA: lf_fm_name  TYPE rs38l_fnam,
          l_lines TYPE i.
    DATA: output_options TYPE ssfcompop.
    DATA: fcodem TYPE sy-ucomm.
    DATA: i_id LIKE thead-tdid VALUE 'V002',
          i_object LIKE thead-tdobject VALUE 'VBBK' ,
          i_tdname LIKE thead-tdname ,
          i_lang LIKE thead-tdspras VALUE 'E' .
    Internal Table declration.
    DATA: int_vbak LIKE vbak OCCURS 0 WITH HEADER LINE,
          int_vbap LIKE vbap OCCURS 0 WITH HEADER LINE.
    DATA : itline1 LIKE tline OCCURS 0 WITH HEADER LINE .
    DATA: retcode   LIKE sy-subrc.         "Returncode
    DATA: repeat(1) TYPE c.
    DATA: xscreen(1) TYPE c.               "Output on printer or screen
    Internal Table declarations
    DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
    i_tline TYPE TABLE OF tline WITH HEADER LINE,
    i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
    i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    Objects to send mail.
    i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
    i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    lt_att_content_hex LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
    Work Area declarations
    wa_objhead TYPE soli_tab,
    w_ctrlop TYPE ssfctrlop,
    w_compop TYPE ssfcompop,
    w_return TYPE ssfcrescl,
    wa_doc_chng TYPE sodocchgi1,
    w_data TYPE sodocchgi1,
    wa_buffer TYPE string,
    Variables declarations
    v_form_name TYPE rs38l_fnam,
    v_len_in LIKE sood-objlen,
    v_len_out LIKE sood-objlen,
    v_len_outn TYPE i,
    v_lines_txt TYPE i,
    v_lines_bin TYPE i.
    DATA: BEGIN OF zlines2 OCCURS 0,
    tline TYPE char255,
    END OF zlines2,
    size TYPE i,
    zdata TYPE sodocchgi1.
    *&      Form  entry
    FORM entry USING return_code TYPE i
                     us_screen TYPE c.
      CLEAR retcode.
      xscreen = us_screen.
      PERFORM processing.
      IF retcode NE 0.
        return_code = 1.
      ELSE.
        return_code = 0.
      ENDIF.
    ENDFORM.                    "ENTRY
    *&      Form  PROCESSING
          text
    FORM processing.
      SELECT *
      INTO   CORRESPONDING FIELDS OF TABLE int_vbak
      FROM   vbak
      WHERE  vbeln = nast-objky.
      LOOP AT int_vbak .
        i_tdname = int_vbak-vbeln .
        SELECT SINGLE * FROM stxh WHERE tdobject = i_object
                                    AND tdname = i_tdname
                                    AND tdid = i_id
                                    AND tdspras = i_lang.
        IF sy-subrc = 0 .
          CALL FUNCTION 'READ_TEXT'
            EXPORTING
              id       = i_id
              language = i_lang
              name     = i_tdname
              object   = i_object
            TABLES
              lines    = itline1.
          IF sy-subrc NE 0 .
            APPEND itline1 .
          ENDIF .
        ENDIF .
        DESCRIBE TABLE int_vbak LINES l_lines.
        l_lines = l_lines .
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname           = 'ZORDER_QUOTE'
          IMPORTING
            fm_name            = v_form_name
          EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        w_ctrlop-getotf = 'X'.
        w_ctrlop-no_dialog = 'X'.
        w_compop-tdnoprev = 'X'.
        CALL FUNCTION v_form_name
          EXPORTING
            l_lines            = l_lines
            control_parameters = w_ctrlop
            output_options     = w_compop
            user_settings      = 'X'
          IMPORTING
            job_output_info    = w_return
          TABLES
            int_vbak           = int_vbak
            int_vbap           = int_vbap
            itline1            = itline1
          EXCEPTIONS
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            OTHERS             = 5.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        i_otf[] = w_return-otfdata[].
        CALL FUNCTION 'CONVERT_OTF'
          EXPORTING
            format                = 'PDF'
            max_linewidth         = 132
          IMPORTING
            bin_filesize          = size
          TABLES
            otf                   = i_otf
            lines                 = i_tline
          EXCEPTIONS
            err_max_linewidth     = 1
            err_format            = 2
            err_conv_not_possible = 3
            OTHERS                = 4.
    Fehlerhandling
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Change the PDF format from 132 to 255.
        CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
          EXPORTING
            transfer_bin = 'X'
          TABLES
            content_in   = i_tline
            content_out  = zlines2
          EXCEPTIONS
            err_line_width_src_too_long = 1
            err_line_width_dst_too_long = 2
            err_conv_failed = 3
            others = 4.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Attachment
        REFRESH:
        i_reclist,
        i_objtxt,
        i_objbin,
        i_objpack.
        CLEAR wa_objhead.
        i_objtxt = 'TEST PDF ATTACHMENT'.
        APPEND i_objtxt.
        DESCRIBE TABLE i_objtxt LINES v_lines_txt.
        READ TABLE i_objtxt INDEX v_lines_txt.
        wa_doc_chng-obj_name = 'SMARTFORM'.
        wa_doc_chng-expiry_dat = sy-datum + 10.
        wa_doc_chng-obj_descr = 'SMARTFORM'.
        wa_doc_chng-sensitivty = 'F'.
        wa_doc_chng-no_change = 'X'.
        wa_doc_chng-obj_langu = sy-langu.
        wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
        CLEAR i_objpack-transf_bin.
        i_objpack-head_start = 1.
        i_objpack-head_num = 0.
        i_objpack-body_start = 1.
        i_objpack-body_num = v_lines_txt.
        i_objpack-doc_type = 'RAW'.
        APPEND i_objpack.
    (pdf-Attachment)
        i_objbin[] = zlines2[].
        i_objpack-transf_bin = 'X'.
        i_objpack-head_start = 1.
        i_objpack-head_num = 1.
        i_objpack-body_start = 1.
    Länge des Attachment ermitteln
        DESCRIBE TABLE i_objbin LINES v_lines_bin.
        READ TABLE i_objbin INDEX v_lines_bin.
        i_objpack-doc_size = v_lines_bin * 255 .
        i_objpack-body_num = v_lines_bin.
        i_objpack-doc_type = 'PDF'.
        i_objpack-obj_name = 'SMARTFORM'.
        i_objpack-obj_descr = 'TEST'.
        APPEND i_objpack.
        CLEAR i_reclist.
        i_reclist-receiver = 'abc at aa.com'.
        i_reclist-rec_type = 'F'.
        i_reclist-express = 'X'.
        APPEND i_reclist.
        CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          DOCUMENT_DATA = WA_DOC_CHNG
          PUT_IN_OUTBOX = 'X'
         commit_work = 'X'
        TABLES
          PACKING_LIST = I_OBJPACK
          CONTENTS_BIN = I_OBJBIN
          CONTENTS_TXT = I_OBJTXT
          RECEIVERS = I_RECLIST
        EXCEPTIONS
          TOO_MANY_RECEIVERS = 1
          DOCUMENT_NOT_SENT = 2
          DOCUMENT_TYPE_NOT_EXIST = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR = 5
          X_ERROR = 6
          ENQUEUE_ERROR = 7
          OTHERS = 8.
        CASE sy-subrc.
          WHEN 0.
          WHEN 1. RAISE too_many_receivers.
          WHEN 2. RAISE document_not_sent .
          WHEN 3. RAISE document_type_not_exist.
          WHEN 4. RAISE operation_no_authorization.
          WHEN 5. RAISE parameter_error.
          WHEN 7. RAISE enqueue_error .
          WHEN OTHERS. RAISE x_error.
        ENDCASE.
    COMMIT WORK.
      ENDLOOP.
    ENDFORM.                    "entry
    Please suggest ASAP, it has come to a critical stage now, a fruitful help will be a great saviour.
    Thanks !

    Hi Guys,
    You can even try this 'CALL FUNCTION 'CONVERT_OTF'
          EXPORTING
            format                = 'PDF'
          IMPORTING
            bin_filesize          = bin_filesize
            bin_file              = xstring
          TABLES
            otf                   = it_otf_final
            lines                 = it_pdfdata[]
          EXCEPTIONS
            err_max_linewidth     = 1
            err_format            = 2
            err_conv_not_possible = 3
            err_bad_otf           = 4
            OTHERS                = 5.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
          EXPORTING
            buffer                = xstring
          APPEND_TO_TABLE       = ' '
        IMPORTING
          OUTPUT_LENGTH         =
          TABLES
            binary_tab            = it_pdf
    Use Cl_BSC Class for easy way to send mail.
    Either u can Distribution list Tcode so23.
    This is the way i have implemted .. !

  • Mail can no longer send attachments

    Mail recently lost the ability to send attachments.  If I drag an image, PDF, etc. in to the composer, it shows up as an icon with a filename below it, but clicking on the link results in a dialog that says "The file xxx could not be opened because it is empty".  Attachments used to just show up inline and send properly.  I'm not sure when this behavior started, but I can't seem to get attachments to work any more.  Even if I right-click on a JPG and share via email, the attachment created is empty.  What's going on?
    Thanks,
    Scott

    Update...  I tried all of the recommended solutions for resetting user permissions and ACLs, none of which solved the problem.  I finally relented to re-installing the Mountain Lion upgrade and that fixed whatever was keeping Mail from adding attachments.  One notable change is that when I was having the problem adding attachments, I would see warnings in the console from sandboxd complaining that Mail was missing file_read_xattr and file_read_data for the files I was trying to attach.  Now that attachments work again, I don't see those messages.  Perhaps something was hosed with Mails runtime configuration with sandboxd?

Maybe you are looking for