I cant startup my mini 210-2072cl. Blank screen

HP mini 210-2072cl

Hi @gids1
Welcome to the HP Forums!
It is a terrific place to find answers and ideas!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you start your notebook it goes to a Blue screen with just a blinking cursor. You have tried the bios thing but no change. ( I am unsure what the bios thing is)
Can you start in safe mode with networking? Windows 7 Safe Mode
If you can boot into safe mode please run the Windows troubleshooter and HP Support Assistant to assist in determining the cause.
Do you see any marks or errors in Device Manager?
Do you see any flashing lights or hear any beeps?
If that did not help or is not possible here is Computer Does Not Start (Windows 7).
If you should desire further assistance please provide your Operating System and the results from the troubleshooting.
Cheers
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Iphone 4s keeps beeping when plugged in i have blank screen but itunes recognizes it but cant allow access because of the blank screen

iphone 4s keeps beeping when plugged in i have blank screen but itunes recognizes it but cant allow access because of the blank screen

As your iPhone is getting connected to iTunes take a backup of your iPhone in iTunes : http://support.apple.com/kb/ht1766
And then Restore your iPhone to Factory settings and see if it works and if that doesn't fix the problem then there might be something wrong with the Hardware and you will have to take your iphone to Nearest Apple Genius Bar.
Restore iPhone : http://support.apple.com/kb/ht1414

HP Mini 210-4000 Blue Screen of Death PAGE_FAULT_IN_NONPAGED_AREA error

I've been up and down the Forums here with no specific luck, unfortunately, so I'm going to ask even if this has been queried and solved in another part of the site which I may have missed.
I am trying to sort out a friend's HP Mini Notebook, model HP Mini 210-4125sa. The machine started up well enough until a week ago, when it suddenly decided to blue screen.
The specific error message text displayed within the BSOD reads as follows:
PAGE_FAULT_IN_NONPAGED_AREA
TECHNICAL INFORMATION:
*** STOP: 0x00000050 (0x87E40000, 0x00000000, 0x92442B13, 0x00000000)
I can not boot past the Windows 7 loading screen - the load bar makes it two fifths up and that's it.
I had thought to try and recover the operating system, if at all possible, from what is apparently a recovery partition that is created on the HD ( i haven't worked with these machines before unfortunately), although i cannot figure how to get at this partition before the error hits.
Also, having attempted to download a piece of software from the HP USB Recovery Flash Disk Utility, i realise that it seems necessary to actually use this from the notebook itself, which is not possible.
Having started running the various onboard tests from the BIOS menu, the Hard Disk Test has just apparently failed (specifically the Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless).HP have not unfortunately been an awful lot of help as they wil only offer a one-off technician support call for forty quid, or to take the notebook away for repair, the cost of which is practically as much as the original cost of the hardware. I would of course prefer to try and sort this out myself but have hit a bit of a wall at the moment. Any suggestions would be fantastic, at this point.
This question was solved.
View Solution.

That hardware test for the hard disk is a dead giveaway of a failed item. A failed hard disk is a show stopper.
Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless) It is important information.
A corrupted NTFS volume (the hard disk) can also generate the " PAGE_FAULT_IN_NONPAGED_AREA error" stop message.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Ipad mini has a blank screen

How or what do you do to correct this

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Mac Mini Has Black Blank Screen on Wake Up

Hi Forum
I have started to Sleep/Wake my Mac Mini between midnight and 6 am when not in use and i see that on wake in the morning it appears to have a Blank or Black screen.!?!? anyone have this?
It seems to be working. i think this as i log on to it using my MBP, as the Mini is headless. When i connect ot the Mini on my MBP, i wouldnt be able to activate Screen Share if the Mini didnt react to being connected. Its in my sidebar to connect to, and does connect, and i can access its files. I dont have a screen connected directly to it.
Any ideas? Its fully up to date. i can turn it off and on and i get full view and functionality, although i didnt want to be doing that each and every day

Hey all,
I have the same issues right now, I have a late 2012 MacMini attached via HDMI to a 65 inch LED LG Smart TV. Power saving settings > both on never. Schedule settings > Shutdown at 2am every day, Wake or start up at 8am every day. Security / Privacy settings > Login without password. Screen saver settings > change picture every minute. This is all in an attempt to keep the MacMini going so I can use it as my HTPC.
I am controling the MM using a MBA 2013 via screen share, this works fine when the TV is powered on, but after turning it off the screen sharing becomes sluggish and unresponsive, also causing it to freeze, go black and make the cursor work like a paintbrush/eraser when navigating the screen, basically everything stated here in the forums. Is Apple ever going to fix this bug? the whole reason I wanted to use Mac Osx is because I want to get rid of Windows all together and create a pure Mac environment in my home.
I have been scouring the forums and google to find a solution for this problem which is becoming quite a disillusion for me right now and it is defeating the purpose of having the MM for my HTPC use.
Look forward to any all replies, cheers, Plucka

IPod Shuffle Help - Cant open files on ipod (blank screen)

I'm sure it's already been covered here, but I couldn't find anything that helped.
I have a iPod shuffle, and iTunes recognises it but wants to re-format it (not my biggest problem), and Windows only partially recognises it.
In My Computer it is listed as an iPod (E:), but when i open it, which it does, it displays a blank screen. It doesn't recognise any files in it AT ALL. But recognises how much free space i still have on my ipod. I can open my ipod files (Songs) on friends and school computers, just not mine.
It just seems that i'm missing a file of some sort, which is able to read the files on my ipod shuffle, but i just don't no what it could be.
I have tried every available solution, reinstalling iTunes/iPod, with no luck. I also just added service pack 2 for my windows xp pro and thought that would have solved my problem.
Any suggestions?
Windows XP Pro
Windows XP Pro
cant open up files on ipod (blank screen)

Have you tried syncing it again? There might be some error during the last sync.. If nothing's wrong, on the left panel, there's your iPod, click on the arrow beside the icon and there's everything..

Bootcamp goes blank screen after startup sign.

I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

@MT1
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Will a new MotherBoard cure Blank Screen with blinking cursor?

Stuck with Blank Screen with blinking cursor; ESC key couldn’t bring up Startup Menu; OS is not loading
Product Name: HP G62 237 CA Notebook PC
Short description of the problems:
--- Press ESC key couldn’t bring up Startup Menu when booting up
--- Blank screen with blinking cursor thereafter
--- Stuck here forever and OS is not loading
DETAILED INFORMATION:
Product Name and Operating System:
Model: HP G62 237 CA Notebook PC
O/S: Pre-loaded with Win 7 Home Prem
Processor: Pent. Dual-Core CPU T4500 2.30GHz
Memory: 4GB
BIOS Ver. (Insyde): F.17
System BOARD ID: 1484
Product #: WQ767UA#ABC
Product Config ID: 049C110000202710000020000
Problem History:
--- Used to have frequent BSOD (got fixed later because of faulty RAM that I suspected)
--- Window couldn’t be loaded
--- Window Repair and HP Recovery were tried but not functioning
--- OEM Hard Drive was then removed & formatted few times by using other computer
--- Hard Drive was then tested by other computer; it can be installed Win XP & Win 7
--- So, Hard Drive was eliminated from the suspect list
--- Replaced with other good RAM from other computers & put back the OEM Hard Drive to my HP G62; everything worked fine, such as: able to reinstall Win 7; listening to music files; got Internet to download latest BIOS from HP support site; connected to my 42 inched TV as my monitor; and even smoothly updated the BIOS from v.17 to v.37!
--- Also, able to receive Window Updates from the Internet; and seemed that all problems were nicely solved
--- Once I believe my system got stabilized; I went back to test the 2 supposedly problematic RAM to see whether they were both faulty or not, then the whole thing has turned around! Completely screwed me up until this moment …
--- After put back the problematic RAM, Window couldn’t be loaded …
--- With a few error messages… such as,
--- The file is possibly corrupt. The file header checksum does not match the computed checksum;
--- After the next reboot… an unexpected screen message showed up:
Intel ® Cantiga PCI Accelerated SVGA BIOS
Build Number: 1932 PC 14.34 11/11/2009 02:36:14
DECOMPILATION OR DISASSEMBLY PROHIBITED
Copyright © 2000-2003 Intel Corp. All Rights Reserved.
--- After that, OS was not loading …
--- Press ESC key couldn’t bring up the Startup Menu during boot up
--- Blank screen with blinking cursor thereafter and seems stuck here forever
Procedures performed for troubleshooting:
Tried hard reset for more than 5 times (removed battery, AC adapter disconnected and then hold down the Power button for more than 60 secs) and tried reseating memory too; same result with Blank Screen with blinking cursor after each reboot.
Connected to an external monitor [Fn + F4/F5] to see whether there was any display, nothing has showed on the external monitor, it seemed that no connection established between the two.
Finally, took the long journey to follow the Service and Maintenance Guide of HP G62 to remove the CMOS battery for well over 15 minutes and put it back. But the result was again disappointed. Tried 4 times already. The latest error message is:
The CMOS checksum is invalid. The CMOS will be reset to the default configuration and will be rebooted. Please check your BIOS Setup options to see if they change.
CMOS Reset (502)
ENTER – Reboot the system
After this message, the same Blank Screen with blinking cursor came back. And pressing the ESC key couldn’t bring up Startup Menu when booting up …
Note: the fan is still running; the Power button is functioning but seems stuck here forever!
I’ve already carefully read this HP Support document titled “HP BIOS Application Selected is Corrupt or Missing”:
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443485#N144
If really is the BIOS problems, then I will have the difficulties of updating a Window-based BIOS when I couldn’t even load Window!
(Note: Boot from USB has no point because right now I couldn’t change the boot sequence because the various “Startup Menu” options are not showing up!)
Secondly, I am still stuck with the Blank Screen with a blinking cursor after I passed the first screen of “Press the ESC key for Startup Menu” when re-booted again!
Thirdly, I have formatted my Hard Drive more than 3 times during the last few days for testing; I don’t have the OEM pre-loaded Win 7 with me anyone … and I don’t think I have the UEFI installed previously on my system. I did try hold down the Win Key + B with the most updated BIOS in the attached USB …, it came back with the same blank screen with a cursor blinking after reboot.
Note: the Blank Screen I’m experiencing right now is not completely black, in fact, there is background light from behind the screen and on each reboot, I can see the HP logo and the left corner message of: “Press ESC key for Startup Menu” … So, I suppose that my computer screen is not physically broken at least.
Requests:
Please explain to me that what are the problem areas and the root causes if is possible?
What steps or other tests can be done to make it work again?
Do you think replacing the entire MotherBoard can cure the Blank Screen with blinking cursor?
[Warranty: expired! I am the original purchaser & the end-user of this HP G62; acquired 2 years ago directly from a trustworthy source: staples (in Canada). Would HP Support still willing to service it for an extra charge?]
Thanks in advance for any suggestion and idea!
Owenson
===========================================

Stuck with Blank Screen with blinking cursor; ESC key couldn’t bring up Startup Menu; OS is not loading
Product Name: HP G62 237 CA Notebook PC
Short description of the problems:
--- Press ESC key couldn’t bring up Startup Menu when booting up
--- Blank screen with blinking cursor thereafter
--- Stuck here forever and OS is not loading
DETAILED INFORMATION:
Product Name and Operating System:
Model: HP G62 237 CA Notebook PC
O/S: Pre-loaded with Win 7 Home Prem
Processor: Pent. Dual-Core CPU T4500 2.30GHz
Memory: 4GB
BIOS Ver. (Insyde): F.17
System BOARD ID: 1484
Product #: WQ767UA#ABC
Product Config ID: 049C110000202710000020000
Problem History:
--- Used to have frequent BSOD (got fixed later because of faulty RAM that I suspected)
--- Window couldn’t be loaded
--- Window Repair and HP Recovery were tried but not functioning
--- OEM Hard Drive was then removed & formatted few times by using other computer
--- Hard Drive was then tested by other computer; it can be installed Win XP & Win 7
--- So, Hard Drive was eliminated from the suspect list
--- Replaced with other good RAM from other computers & put back the OEM Hard Drive to my HP G62; everything worked fine, such as: able to reinstall Win 7; listening to music files; got Internet to download latest BIOS from HP support site; connected to my 42 inched TV as my monitor; and even smoothly updated the BIOS from v.17 to v.37!
--- Also, able to receive Window Updates from the Internet; and seemed that all problems were nicely solved
--- Once I believe my system got stabilized; I went back to test the 2 supposedly problematic RAM to see whether they were both faulty or not, then the whole thing has turned around! Completely screwed me up until this moment …
--- After put back the problematic RAM, Window couldn’t be loaded …
--- With a few error messages… such as,
--- The file is possibly corrupt. The file header checksum does not match the computed checksum;
--- After the next reboot… an unexpected screen message showed up:
Intel ® Cantiga PCI Accelerated SVGA BIOS
Build Number: 1932 PC 14.34 11/11/2009 02:36:14
DECOMPILATION OR DISASSEMBLY PROHIBITED
Copyright © 2000-2003 Intel Corp. All Rights Reserved.
--- After that, OS was not loading …
--- Press ESC key couldn’t bring up the Startup Menu during boot up
--- Blank screen with blinking cursor thereafter and seems stuck here forever
Procedures performed for troubleshooting:
Tried hard reset for more than 5 times (removed battery, AC adapter disconnected and then hold down the Power button for more than 60 secs) and tried reseating memory too; same result with Blank Screen with blinking cursor after each reboot.
Connected to an external monitor [Fn + F4/F5] to see whether there was any display, nothing has showed on the external monitor, it seemed that no connection established between the two.
Finally, took the long journey to follow the Service and Maintenance Guide of HP G62 to remove the CMOS battery for well over 15 minutes and put it back. But the result was again disappointed. Tried 4 times already. The latest error message is:
The CMOS checksum is invalid. The CMOS will be reset to the default configuration and will be rebooted. Please check your BIOS Setup options to see if they change.
CMOS Reset (502)
ENTER – Reboot the system
After this message, the same Blank Screen with blinking cursor came back. And pressing the ESC key couldn’t bring up Startup Menu when booting up …
Note: the fan is still running; the Power button is functioning but seems stuck here forever!
I’ve already carefully read this HP Support document titled “HP BIOS Application Selected is Corrupt or Missing”:
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443485#N144
If really is the BIOS problems, then I will have the difficulties of updating a Window-based BIOS when I couldn’t even load Window!
(Note: Boot from USB has no point because right now I couldn’t change the boot sequence because the various “Startup Menu” options are not showing up!)
Secondly, I am still stuck with the Blank Screen with a blinking cursor after I passed the first screen of “Press the ESC key for Startup Menu” when re-booted again!
Thirdly, I have formatted my Hard Drive more than 3 times during the last few days for testing; I don’t have the OEM pre-loaded Win 7 with me anyone … and I don’t think I have the UEFI installed previously on my system. I did try hold down the Win Key + B with the most updated BIOS in the attached USB …, it came back with the same blank screen with a cursor blinking after reboot.
Note: the Blank Screen I’m experiencing right now is not completely black, in fact, there is background light from behind the screen and on each reboot, I can see the HP logo and the left corner message of: “Press ESC key for Startup Menu” … So, I suppose that my computer screen is not physically broken at least.
Requests:
Please explain to me that what are the problem areas and the root causes if is possible?
What steps or other tests can be done to make it work again?
Do you think replacing the entire MotherBoard can cure the Blank Screen with blinking cursor?
[Warranty: expired! I am the original purchaser & the end-user of this HP G62; acquired 2 years ago directly from a trustworthy source: staples (in Canada). Would HP Support still willing to service it for an extra charge?]
Thanks in advance for any suggestion and idea!
Owenson
===========================================

Numbers & Pages Apps for iPad. Blank Screen looking at iCloud.

Apps work correctly when iCloud Documents & Data turned off and apps preferences delselect Use iCloud.
Once use iCloud is selected under iCloud preferences and App preferences startup sceen goes to a blank screen. ie. No + symbol on upper left etc.
Using iOS 7 with latest updates and newest Numbers/Pages on a iPad Retina display.
Any ideas?

I suspect a lot of hospitals are doing this.
Could you give a more detail description of how things work on a PC Laptop?
Is the data on a network share?
How does the data get to the PC?
How is the data accessed on the PC?
Is there an all in one program running on the pc to access the data?
Done in a web browser? IE?
Windows File server access. Get permission to check out what servers are around. See what the data looks like.
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8

Blank Screen- HELP PLEASE!!

HI
My ipod mini has a blank screen. It went very faint suddenly and then the writing just disappeared. The screen still lights up and the music plays but its really hard to find the music without the screen and now I've lost it! I'm away from home (and my PC) so can't reset it as I can't put the music back on. Am REALLY stuck.
Bea

You can reset it. Just hold down the menu/select buttons until the Apple logo appears. Keep trying if it doesn't work first time, and if you have the charger, do it whilst it's plugged in.
Restting the iPod will not erase the music.

My iMac has coloured vertically lines on starting up after a short while goes to blank screen

My IMac has coloured vertical lines on startup eventually changing to a blank screen

i have similar problem with macbook pro. https://discussions.apple.com/thread/4530266
but after resetting NVRAM (I followed the instructions from here http://support.apple.com/kb/HT1379) it runs normally, and appear from time to time now.
is it graphics chip, rkaufmann87?

HP Mini 210-1102TU Wont Accept 2GB ddr3 no boot.

Goo day!
I recently bought this laptop HP MINI 210-1102tu
Specs
-atom n475
-1gb DDR3
-250gb hd
This is my replacement with my 1year old hp mini 110 n280.
My problem/our problem is this.
It seems we CANT upgrade the memory into 2gb ddr3 1066 single stick. i already tryd 2 Diffirent Brand Kingston and Team elite.
Store where i bought my laptop told me HP BIOS does not accept 2gb DDR3 only 1gb ddr3.
to HP team Please Release a bios that will support our hp mini 210 DDR3 variant to accept 2gb ddr3. since our old hp mini 110 accepts 2gb memory and some for the HP mini 210 DDR2 variant accepts 2gb.
Thanks im hopping for answer from HP. regarding this matter and release a new bios that will allow us users to upgrade to 2gb DDR3
Much thanks!
-Pao

Hmmm...interesting...Mini 210 with new Atom processors (N475) should support 2GB of DDR3 1333...
What is the BIOS version do you have?
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

I have an HP mini 210-214 dxpc want to install drivers for hp officejet G85 printer

Help I'm at wits end I need driver (s) for hp officejet G85 all in one printer installed in my hp mini 210-214 dxpc with an upgraded windows 7 ultimate os in it.i've done everything i can find on hp website, the wizard finds the printer but no driver, windows can't find the driver, hp says its in my os already as a __os driver i cant find it or get this going been doing this for10 hrs now please somebody make it simple for me to install the necessary driver or whatever it is i need to do to get this printer operating from my laptop. oh this is through a usb connection if you need to know that.
thank you for helping

Hi @GoddessDiamond,
Welcome to the HP Forums!
I understand that you are trying to install drivers for your HP Officejet G85 printer on Windows 7. I am happy to help!
Please take a look through this installation guide, Installing the Printer Driver Using the Windows 7 Built-in Solution for a USB Cable Connection.
Otherwise, if that does not work, you can try to download the Windows XP driver, HP Officejet Basic Software and Driver, and run it using compatibility mode. Make older programs run in this version of Windows.
If neither of those two options work, then the last step is to try an alternative driver, please see this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R.
Hope this information resolves your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HELP MY NOTEBOOK HP MINI 210-1101TU

i have problem with my notebook, can't booting and entered to windows because my system recovery is nothing, i have to try for use Roxio BackOnTrack but still not able to get my USB boot on, what should I do so that my notebook can run as before anymore? anyone please HELP ME.... you cant give me suggestion to my email [Personal Information Removed]
I attach the following picture at boot time

Hi Belajar,
I understand you are having complications with the boot menu on your HP Mini 210-1101TU. Here is a document on how to choose the boot devices.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c00364979&lc=en&product=4207223&tmp...
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Mini 210-2090NR malware and fatal error after update

Hi,
I have an HP Mini 210-2090NR with Win 7 starter. I had malware that kept trying to contact websites like adclick, etc. It tried an auto update and then got a one line "fatal error". Now it will boot to the quickweb but not the OS. I tapped ESC until I got a menu and tried F11 but the screen just goes completely blank. Is the recovery partition toast or is there another way to access it?
Thanks,
Matt

The error message- Replace hard Disk 1 is a clear indication that your hard drive has gone faulty on the Notebook and needs to be replaced.
I would strongly recommend you to back up your files if its possible and apart from replacing the hard drive with a new one, there is no other option to fix this issue on the Notebook
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

I cant startup my mini 210-2072cl. Blank screen

Similar Messages

Maybe you are looking for