I cant turn it off after doing the R'S PLease help i wil explain more

Toady I pulled it out from a little pod vacation it took (it sat in his little protective case for a while like 6 week. anyway got it out recharged it and it actually turns off and on fine plugged to comp, or the power adapter it came with.I tried everything to turn it off once it is on unplugged. no I didnot pull it when it says do not disconnect only when it froze on my comp once so i had too and still coulodnt turn off had to wait for the battery to die with a full charge it is like an hour or two plug it in charged went to ipod update only option was to restore that time it did show up ejcted it right but still the same thing now I can perform the 6 second resetbt when it comes on again same thing cantturn it off no screns are locked or anything. Someplease help I am going across 4 states fri and want to bring it
THANK IN ADVANCE FOR ANY IDEAS WORKAROUNDS I AAM MAN ENOUGH TO OPEN IT UP IF I CAN LET ME KNOW

I have a 60G iPod video and I've been experiencing the exact same problem and It is driving me nuts. Even when I reset the iPod turns back on and stays that way. Last night I set it to play a small playlist as I went to sleep and 7 hours later it hadn't turned off... battery was nearly dead. UGH!
Although I forgot to do it last night, here's what I've been doing to workaround the problem (it's annoying me to no end, but at least it works and conservs battery power) ... go to the sleep timer and set it! I usually set it for the minimum of 15 minutes when I don't want to use the iPod, then I make sure I set the lock. The iPod will turn itself off in 15 minutes and stay that way until I either look at it funny or breathe on it, then it will turn on again until I pull the same stupid little trick, LOL! I know it's a dumb workaround, but I hope it helps!

Similar Messages

  • I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

    I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

    Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
    It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices.

  • I let my iphone 4S die completely and after i put it on the charger it cuts on then cuts right back off and keeps doing so. i left it on the charger all night and when i woke up its still doing the same thing. please help

    i let my iphone 4S die completely and after i put it on the charger it cuts on then cuts right back off and keeps doing so. i left it on the charger all night and when i woke up its still doing the same thing. please help

    imanfromsweden wrote:
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....
    On belhalf of my fellow volunteers, the answer is, "We'll try our best." 
    My advice is to try not to treat this like it is a paid service provided by compensated professionals.  Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

  • Phone goes into standby and wont turn off after update!!! please help me as hate it

    On Friday I turned my phone off as per usual and turned back on in the morning to find the phone totally different.
    The red lock button now only sends the phone into like a sleep mode, and i cant find any where to turn it off.
    The screens keep fading down and I have re set the backlight to not dim but some thing is over riding it.
    I used to love my phone and now hate it so much, is there a way of booting this update off my phone and putting it back to how it was. I tried to restore and its the same and then tried to put the phone back to previous settings I had stored on my lap top but again nothing.
    I now have some new blackberry software on the lap top too which now does not even recognise my phone and there for the past restore points I had.
    My daughters bold 9700 does the same thing now too, please please help

    Hiya!
     Blackberry doesnt actually "turn off" it only goes into a standby mode (press and hold the end call button). To fully power it down, you would perform a battery pull.
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • My ipad froze using skype. I cant turn it off or close the app. What should I do?

    I was using skype on my ipad when the screen froze. I can't close the app or turn my ipad off using the offbutton and the automatic shut down isnt working. Any suggestions?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Lenovo 3000 n200 close lid goes dark after upgrade the BIOS. Please HELP!!!

    The lid is set to do nothing but the screen turns off and i cant get it back on by using the keyboard or mouse.
    Only way is to use function keys to standby and bring it back.
    My notebook configs as below:
    CHI XP Pro
    Bios version: LENOVO 66ET42WW (1.16 ) 04/03/2008
    Display Driver version: 6.14.10.4977, 8-11-2008

    I found this prolem on 3000 v2000 (0764-a46) too.
    - os : windows xp sp3 (also in windows xp sp2)  but this problem doesn't found in windows vista
    - cause : i found that after i'm install vga driver this problem is occur (but uninstall vga driver this problem isn't occur) 
    I think lcd is turn off but system doesn't hang because i try to press windows + U + U (shut down windows) then system is turning off.
    if i press windows + U + R (restart ) system is restarting but lcd isn't turn on
    i search this problem on internet and found similar problem on other product they says: windows try to swap primary display and secondary display

  • I lost all of my photos after downloading the update! Please help!!

    My entire iphoto library is empty; all my photos (thousands of my child's first two years) are gone - this happened after I downloaded the new update last night. Has this happened to anyone else?  Please tell me you know how I can get them back!?

    Just in case you don't see my responses before I sign off....
    That Masters folder should have all of your pictures...the actual files...assuming you've used iPhoto all along and are letting it manage the photo locations.  I'd suggest copying that folder elsewhere.   Better yet just copy the whole "iPhoto Library" thing.
    After that check out this document:
    http://support.apple.com/kb/ht2638
    That shows how to run iPhoto to repair the library.  Worst case if that doesnt work is to create a new library and reimport your photos from the copy you made.  You'll lose all of the tags, etc. you might have put on photos but the most important part...the actual photos...should be good.

  • Cant fins a brokel link in the action script, please help.

    Hi guys. I'm fairly new to flash and I've hit a hurdle which
    I think looks pretty simple.
    I click on a button in the Nav bar (SERVICES) and the link
    seems to be broke.
    Do I need to upload the fla file to get help or can you tell
    from the movie on line here?
    http://www.willpower.net.au/rounddesigncopysite/

    The link in your message is also broken.

  • Lost all contacts etc after downloading the new software please help

    i downloaded the new softward today and have now lost all contacts pictures messages etc  iphone was backed up but when i started the download the iphone went into restore mode.  im completely at a loss.  need all data back especially pictures

    Did you fail to import your pics before updating?
    You can try restoring from backup
    You should be syncing contacts with your computer regularly.  Have you failed to do this?

  • My screen zoomed in somehow and now I can't get it back to normal. I've tried turning it off as well as command  /-. Please help!

    FYI, I was running parallels on it and using Revit architecture when it happened.

    Ambie300,
         If you have a wireless mouse, hold down "Command" and then scroll down on your mouse.

  • I too had the same vertical white line in the centre of the screen last night after having my iPhone 5 up and running for 10 days. I managed to turn it off by holding the buttons in and it came up with the iTunes screen....2 hours later it came good?

    I was talking outside on my iPhone 5 in a fairly humid environment (The Pilbara in January, 2014) then when the call was finished I hung up (as I was walking back inside to the air-conditioning) this white vertical line appeared in the centre of the screen and wouldn't go away. I couldn't use it NOR could I accept calls. (I called my number from my other phone). I eventually managed to turn it off after removing the protective casing (Otter Box) and then it came up with the white cord / iTunes screen........I left it for a while...it turned back on BUT is still had a flickering screen.......I re-charged it and I have backed it up this morning (at work) on iTunes and it seems to be working 'fine.' All I can say is 'DO NOT GET RID OF YOUR SAMSUNG GALAXY PHONE IF YOU HAVE ONE!' I haven't had an OUNCE of trouble with it and have owned it for at least 3 years. The iPhone has been up and 'running' since the 6th of January, 2014. This happened on the 15th of January, 2014.

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • My mini i pad has frozen. I cant turn it off and the screen doesnt function. It has frozen with a message on the screen saying ive run out of storage in i cloud and has two boxes for either close or settings  But i cant get out of this screen  Any ideas?

    Hi
    My mini i pad has frozen. I cant turn it off or opporate the screen. I have a nessage on screan telling me my storage is full in i cloud but I cant navigate to settings or close

    Try this to get rid of the message.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How to improve the performance of the attached query, Please help

    Hi,
    How to improve performance of the below query, Please help. also attached explain plan -
    SELECT Camp.Id,
    rCam.AccountKey,
    Camp.Id,
    CamBilling.Cpm,
    CamBilling.Cpc,
    CamBilling.FlatRate,
    Camp.CampaignKey,
    Camp.AccountKey,
    CamBilling.billoncontractedamount,
    (SUM(rCam.Impressions) * 0.001 + SUM(rCam.Clickthrus)) AS GR,
    rCam.AccountKey as AccountKey
    FROM Campaign Camp, rCamSit rCam, CamBilling, Site xSite
    WHERE Camp.AccountKey = rCam.AccountKey
    AND Camp.AvCampaignKey = rCam.AvCampaignKey
    AND Camp.AccountKey = CamBilling.AccountKey
    AND Camp.CampaignKey = CamBilling.CampaignKey
    AND rCam.AccountKey = xSite.AccountKey
    AND rCam.AvSiteKey = xSite.AvSiteKey
    AND rCam.RmWhen BETWEEN to_date('01-01-2009', 'DD-MM-YYYY') and
    to_date('01-01-2011', 'DD-MM-YYYY')
    GROUP By rCam.AccountKey,
    Camp.Id,
    CamBilling.Cpm,
    CamBilling.Cpc,
    CamBilling.FlatRate,
    Camp.CampaignKey,
    Camp.AccountKey,
    CamBilling.billoncontractedamount
    Explain Plan :-
    Description                    Object_owner          Object_name     Cost     Cardinality     Bytes     
    SELECT STATEMENT, GOAL = ALL_ROWS                              14     1     13
    SORT AGGREGATE                                                  1     13
    VIEW                         GEMINI_REPORTING               14     1     13
    HASH GROUP BY                                        14     1     103
    NESTED LOOPS                                        13     1     103
    HASH JOIN                                             12     1     85
    TABLE ACCESS BY INDEX ROWID     GEMINI_REPORTING     RCAMSIT          2     4     100
    NESTED LOOPS                                        9     5     325
    HASH JOIN                                        7     1     40
    SORT UNIQUE                                        2     1     18
    TABLE ACCESS BY INDEX ROWID     GEMINI_PRIMARY          SITE          2     1     18
    INDEX RANGE SCAN          GEMINI_PRIMARY          SITE_I0          1     1     
    TABLE ACCESS FULL          GEMINI_PRIMARY          SITE          3     27     594
    INDEX RANGE SCAN          GEMINI_REPORTING     RCAMSIT_I     1     1     5     
    TABLE ACCESS FULL     GEMINI_PRIMARY     CAMPAIGN                    3     127     2540
    TABLE ACCESS BY INDEX ROWID     GEMINI_PRIMARY          CAMBILLING     1     1     18
    INDEX UNIQUE SCAN     GEMINI_PRIMARY     CAMBILLING_U1                    0     1

    Hello,
    This has really nothing to do with the Oracle Forms product.
    Please, send the SQL or/and PL/SQL questions in the corresponding forums.
    Francois

  • 4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    Hello there, LaruaGalliers.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    iPhone or iPod touch displays the low-battery image and is unresponsive
    If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.    
    You should see this image when iPhone or iPod touch begins to charge:
    If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
    If the issue persists, follow these troubleshooting steps.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me

      Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me this has been like this for 30 minutes

    Did you try to reset by holding the sleep and home button until the Apple logo comes back again?
    If this does not work, try to connect again in recovery mode: http://support.apple.com/kb/HT1808

Maybe you are looking for

  • How to start over with a new itunes account on an old computer

    my daughter transferred all her music from my computer, where she had her itunes account, to her new computer and then went off to college. i can finally use itunes for my own music. how do i get rid of her millions of tunes and change the account in

  • How to Calculate Net weight, Gross Price, Surhcarges for  Confirmed Qty

    Hello, I have a requirement where I need to calculate the Net weight, Amount( gross price), Surhcarges etc.. for the Confirmed qty of a sales order item. In SAP standard the pricing procedure will run for the Order Qty and all the prices are related

  • load-on-startup not working in weblogic 9.1

    Hi I have the following xml tag in web.xml file <load-on-startup>1</load-on-startup> for some servlets, i have given then sequence 1 to 5, but for some reason 5 is loading first and the whole application crashes because of this. do i have to mention

  • Change Output Device Settings @ Runtime?

    This will sound silly, but there is a good reason for it :).  Also, I am not much of an ABAPer. We have a requirement to change output device settings on the fly in a program.  For instance, in case A, we would like to use the output device as it was

  • JMS / MBD Best Practices

    Hello All, There is currently a dispute in my camp about the limit of "responsibility" to place on a single MDB. In this case, the argument surrounds whether it is "good practice" to allow a MDB's onMessage function to: - Open a connection to a servl