I cant turn off the external speaker

i have tried to restore on a number of occasions, swtitchin it off and on again even with usint the menu button with it, looked at settings, but no joy

You may have switch on the VoiceOver accessibility feature (System Preferences -> Speech;(fn) Cmd-F5)
* http://guides.macrumors.com/System_Preferences#Speech
* http://www.apple.com/accessibility/voiceover/

Similar Messages

  • How do i turn off the external speaker on my brand new iPod touch

    how do i turn off the external speaker on my brand new iPod touch - it is very annoying

    Just turn the volume fully down using the lower button on the upper left side of the iPod.
    You can also go to Settings>Sounds to turn off alert and ringer sounds.

  • I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

    I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

    Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

  • ?( How turn off the onboard speaker???

    MSI kt3 ultra2...I just wondering how to TURN OFF the onboar speaker?

    Hi,
    do you mean onboard audio AC'97 ? or onboard buzz speaker?
    If it's the buzz speaker, I think you might have to solder the buzz speaker off the board (that voids warranty too!)
    If it's the onboard audio, it can be disabled in the BIOS, integrated peripheral - onboard AC'97.

  • HT4623 have just ugraded IPhone 5 to I07.  My passcode is not being recognised, also whir I connect to the computer the message is that the cable is incorrect.  Any suggestions.  I cannot restore on itunes cant turn off the find my iPhone..

    I have just ugraded IPhone 5 to I07.  My passcode is not being recognised, also whir I connect to the computer the message is that the cable is incorrect.  Any suggestions.  I cannot restore on itunes cant turn off the find my iPhone..

    From your iCloud account, you can go to Find My Phone and remove the iPhone from your devices list which will release it, or you could do a remote erase of the iPhone from iCloud.

  • How do you Turn off the front Speaker

    Hi everyone,
    I hope this isn't too much of a stupid question since the answer is probably very simple, but I just cant seem to figure it out...
    Does anyone know how to turn the music coming from the front speaker in the Mac Pro?
    Any advice is appreciated,
    Thanks
    Terry
    Mac Pro   Mac OS X (10.4.7)  

    Thank you everyone, unfortunately I can't find the right setting under the control panel
    Here's a strange variation to this that I'm wondering
    if anybody else has seen.
    I plugged in some analog speakers via the line-out in
    the back and set the output to the line-out.
    Everything goes thru these speakers EXCEPT when I
    play a quicktime movie. That is, double-click a QT
    movie and it opens (although in the Finder, not
    Quicktime Player) and the sound comes out the front
    speaker -- which should only get the system sounds
    (as I have it set in the sound preferences).
    Anybody else see this strangeness?
    Mac Pro 2.66, 1GB RAM,
    320/320/320/320 RAID1/0 HD Mac OS X (10.4.8)

  • Cant turn off the ken burns effect

    The ken burns effect (why is that on by default for crissakes?) cannot be tuned off!!!! I have about 10 images in a movie made up of about 100 still images on which the ken burns effect cannot be turned off. I tried unchecking the ken burns check box & hitting the update button, but it immediately turns itself back on!! Tis is with iMovie 3, and as i said, it affects only the first 10 or so images in this particular project.

    I know, sometimes it feels like Ken Burns has a mind of its own. It WILL do what you want, but first you have to figure out its rules.
    The most important is that all of the Ken Burns settings, the KB checkbox, zoom, pan and duration are controlled by the LAST imported clip you made, or a previously-imported clip you clicked on. THAT's what sets the default setting for your next import(s). (A very nice feature, by the way, for it lets you apply the Ken Burns settings of one clip to the next photos you import. You don't have to reconfigure settings each time.)
    That also means that when you uncheck the KB checkbox that won't "stick". When you click on some other clip it may change.
    So when updating an existing clip, the trick is to select the clip, THEN adjust the Ken Burns settings, THEN Update the clip.
    A complicating factor is that previously-imported photos to which special effects or other editing has been applied are no longer considered Ken Burns clips, so clicking on them doesn't have the same result.
    So pay close attention to what you click on, and even closer attention to whether or not there is a clip selected or an image selected in the Photos pane selected. iMovie will select a photo on its own when you haven't selected something.
    It works like you want, but first you have to see that what it does is you want.
    Karl

  • One of my phone is roaming she lives n orth troy i call 4 times ll ready and she cant turn off the roaming or datashe wont getno text messages or cal what top do

    we have  phones on our line one phone is nextto the Canadian  boarding I keep on roaming  she try shutting of roaming and data she don get no texting or no call  what can I do I calles Verizon 4 time to take care of this problem  I don't know to do  if I don't d some thing th bill is going to be to high

    What phone model are they using? Have you checked the phone's user manual to see if there is a way to turn off roaming?

  • How do I turn off the external display screen on my MBP even after I disconnect the second screen?

    I connected my MBP to my television via the HDMI port to watch a movie. Whenever I have a second display connected I have different wallpapers for each screen. After the movie was over I disconnected the cable and started surfing the web, and I always have safari full screen so I have to three finger swipe to go back to my desktop. After disconnecting the hdmi cable, the external display screen became part of the three finger swipe in full screen mode. I can swipe to go from safari to second display screen (not connected to anything) and then to my desktop.
    My question is how do I get rid of the dog-gone external display screen? I am getting tired of having to swipe more than once from full screen to my desktop.

    Disregard this question, I figured it out. I just had to go in a delete the other desktops that showed up, how they got there in the first place, I'm not sure but I will visit the apple store to ask some questions.
    Mods you can close and/or delete this whole convo.

  • I have the earliest version iPad (updated running system) I am trying to use my earbuds. How do I turn off the external audio so the sound only comes through the earbuds?

    I am trying to use earbuds with my iPad Earliest version with updated running system. How do I get the sound to only come through the esrbuds and not be audible to everyone around me? Thanks!

    That's strange.
    You should inky be getting audio from the headphones.
    Make sure that they are plugged in all the way.
    If they aren't, you will get both audio.
    Turn up the volume on your ipad with the buttons.
    where it shows the bell, it should say Headphones.

  • I cant turn off the the speach guide

    Everytime i point at something it tells me what it is. I went tospeech and it is grayed out on turn off

    You may have switch on the VoiceOver accessibility feature (System Preferences -> Speech;(fn) Cmd-F5)
    * http://guides.macrumors.com/System_Preferences#Speech
    * http://www.apple.com/accessibility/voiceover/

  • While on speakerphone, the external speaker became fuzzy with static.  The phone is updated, and I've turned it on and off several times.  It is still full of static.  Please help.

    While on speakerphone, the external speaker became full of static, and the phone cannot play music either to the external speaker.  When the headphones are plugged in, you can then listen to music and old voice mail messages.  It's updated with the current version.  I've turned it off and on several times, but the external speaker is still full of static.  It has not gotten wet at all.  Please help!

    try an other phone on the extern speaker , probably the speaker is not working as it should .

  • How do i turn off the feature so that it stops speaking all of my playlists

    how do I turn off the feature on my ipod so that it stops speaking all of my playlists

    To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
    http://support.apple.com/kb/ht4539
    Follow those instructions and it will all be taken care of.

  • HT5927 im trying to update my iphone 4 and in order to complete the restore backup from itunes i need to turn off the find my iphone on the iphone but i cant get passed the restore backup stage - what should i do?

    I'm trying to update my iphone 4 and in order to compelte the restore backup from itunes i need to turn off the 'find my iphone' but i cant get passed the restore backup stage - what should i do?

    Hi beckiewinter!
    I have some information for you that may help you understand your iPhone's Activation Lock more thoroughly:
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    So in order to update your iPhone, you may need to turn off Find My iPhone. This can be done through the iCloud settings, and more information on those settings can be found right here:
    iCloud - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph3c79652c
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • How can I turn off the Ipod 5g speaker so it just plays through the headphones?

    How can I turn off the Ipod 5g speaker so that it just plays through the headphones?

    First make sure your headphones are plugged all the way in, meaning no silver from the headphones plug can still be seen.
    If that's not the issue, try a hard reset of the Nano.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

Maybe you are looking for

  • Boolean value mapping in udb

    UDB does not support bit data types to my knowledge... what is a recommended way to map a boolean value to a udb database?

  • Mac Book Pro Password - Husband had a stroke and can't remember

    My husband had a stroke, and he can't remember the password on his Mac Book Pro. He'd really like to try to use his computer, and we want him to, as we hope it will help his recovery.

  • Can't update to the latest (v52) firmware version ...

    Other people can update their software but I cannot, although we have the same Nokia device model. What's wrong? Update availability is based on many things, including existing Nokia device firmware version, country, and operator. It may be due to on

  • After updates Apple TV and ipad won't wake mac

    Since the latest update to Maverick and new itunes and Apple TV software neither my ipad or Apple TV will load my library from itunes. I have to go to the imac and wake it myself. Home sharing is on, I have done a hard reset of my time capsule, reset

  • JUnit code

    Hi I have junit.jar in my lib. Can someone tell me whats JUnit code? How do i go about it ?