I cant turn on imac, keep hearing beep sound

Hi All,
I am not able to turn on my iMac. There are three beep sound when I try to turn it on. Any idea to fix this problem? Please help. Thank you very much.

Actually,
Power On Self-Test Beep Definition - Part 2
3 beeps means something is wroing with your dimm slots or the dimms themselves.
Try reseating the ram.

Similar Messages

  • My macbook air won't turn on and has a beeping sound. Any suggestions?

    My macbook air won't turn on and when the power button is pushed, it makes a beeping noise. Any suggestions?

    Beeps on startup:
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images.
    5 beeps = processor is not usable
    http://support.apple.com/kb/HT2538

  • My IPod 4th Gen is not working, i am not shore if it is just broken but the screen will not turn on. i can hear the sounds but the screen id blank

    i need ur help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Cant startup my iMac - just a strange sound

    One morning My iMac was impossible to start up. The screen stays grey and it gives me at the same time a high sound 3 times, then a small break, same sound 3 times, break and continue until I shut down the iMac.
    I have tried to start up in safe boot, and I get a errror message in the code.
    SmcReadKeyAction ERROR:smcReadData8 failed for key $Num (kSMCKeyNotFound)
    I hope someone can help
    Thx

    On Mac 10.7.5...

  • HT1338 why does my imac keep making a noise every 30 seconds when I am not using it?

    My iMac keeping making a sound (sort of a clicking sound) every 30 seconds when I am not using it. It is very annoying; is therre a way to stop it?

    Bring it in to service, and ask them to tell you what the noise is.  Sometimes it just is the optical drive realigning itself.   It could be the sign of a dying hard drive.  Only they can tell the difference.

  • Beep sound and unable to turn on

    In the midst of installing the software, the programme prompt me to restart by pressing the on button for 10 sec, after that my laptop was not able to turn on and come with beep sound. anyone can assist, thx

    How many beeps?
    Read here.   Power On Self-Test Beep Definition - Part 2

  • CUE 7.x Beep Sound missing

    Hi,
    I am Rohan.
    I have a CUE 7.x . The users are not hearing Beep Sound after the message is being played " Please record your message after the beep". As a result the end user keeps waiting for the beep and they dont leave a message.
    Please suggest how do we enable  or diable the beep. Is there anything that can be done.
    Rohan Sahi.

    Hi Rohan,
    I have seen this issue before and an upgrade seems to fix this this issue. Try an upgrade of the IOS and let me know how you go. This issue could also be caused by a bug in the CUE as well. If the IOS upgrade did not fix the issue, try upgrading CUE to the latest version in 7.
    Hope this issue is helpful.
    Thanks,
    Farbod
    PS. If you found this post helpful please rate. This way we will be more motivated to answer questions on here.

  • Beep sound coming from FIOS Box.

    Every 15 minutes, I hear beep sound coming from my Fios Box. What is wrong?

    if it's the battery back up in your garage or basement, then it's probably time to replace the battery.  that normally is an alarm that the battery needs to be replaced.   in your TOS when you activate your fios it describes that verizon will take care of the battery for 1 year, and after 1 year you are responsible to replace it. 
    battery mart on the internet is the cheapest place I have found to replace it.  16 bux plus shipping.
    http://www.batterymart.com/p-12v-7ah-sealed-lead-acid-battery.html
    http://www.batterymart.com/p-12v-7ah-sealed-lead-acid-battery-f2.html
    I don't know if it's an F1 connector or an F2 connector, so on the website they give you a little guide, and you can look at your battery and see which one it has. 
    if you installed within a year, then call verizon and they should send you a new one at no cost. 
    there is also an alarm silence button, but I am not sure how long it makes it a silent alarm for.  maybe a couple hours, maybe a couple days, someone else on here might be able to answer that. 

  • IMac keep shutting down black screen then have to hold power button down then turn it on again i did this 4 times in all of a period of 5 minutes what to do ??

    iMac keep shutting down black screen then have to hold power button down then turn it on again i did this 4 times in all of a period of  15 minutes what to do ??

    Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
    There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
    If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
    Run Rember first... call back with results.
    Good luck,
    Clinton

  • HT201177 cant turn on my imac just a black screen which i never shut down to begin with

    help i walked in to find my imac with a black screen and i cant turn it back on has this happened to anyone else? how do i get it back on

    You're sure the electrical socket it's attached to has power? That socket isn't controlled by a wall switch, which is off? If the socket is good, see this Apple note for systems that won't turn on.

  • I cant turn on the built in camera on my imac

    I cant turn on the built in camera on my imac

    Or one of the places that can make use of it as well such as System Preferences > Users and Groups > your account > pic (It will edit and offer the camera).
    As this Thread is in Mavericks it will be Messages and not iChat.
    Most Browser with the Flash Player plug-in can make use of sites like MeBeam
    GoogleTalk can be used in a Browser  to other compatible sources with the Google Video Plug-in.
    @hdd828
    I would go to the Apple Icon Menu and hold the ALT key down whilst doing so  and select the System Profilier.
    The camera should appear under the USB items.
    If it does not try a PRAM reset.
    Restart the computer holding down the CMD+ALT+P+R keys until you have heard three Start up bongs then let the Start up continue.
    10:12 pm      Wednesday; March 25, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • My imac keeps turning off and restarting by itself

    My iMac keeps turning off and restarting by itself.  Any ideas why and how to fix it?  Thanks. 

    Hi ...
    Try Resetting the System Management Controller (SMC)

  • Wifi keeps on getting disconnected/ cant turn off iphone/ cant open messages

    My wifi keeps on getting disconnected ever since I updated my iphone to ios 7.2
    and when I go to settings, when I click wifi, my iphone hangs.
    i cant open my messages folder. it just shows a blank page...
    and lastly, I cant turn it off. no matter how long I press the power/lock button, nothing happens..
    I tried to reset it, but it cant detect my wifi connection, but my mac does..
    help??

    Force the phone into recovery mode, as described here, & restore it as a new device:
    http://support.apple.com/kb/ht1808
    When finished, login to iCloud.com & remove the phone from your daughter's account.

  • My mac will not turn it 'y 3 short beep   3  long bip   3bip , can  you help me  please, i have one imac 27 i7.

    Hello,
    My mac will not turn it 'y 3 short beep + 3  long bip + 3bip , can  you help me  please, i have one imac 27 i7.
    Thank you

    Hey ,
    Thank for your replyI triedwith another new ram but still the same problem.
    I will first explain how it began.
    I put my imac in the box and then I store them in my attic.
    Shook it possible that when I put my imac to loft the boot is clear due to cold ?
    Thank you

  • My Macbook Pro 13¨ i7 wont turn on. I press the on button and the white light wont turn on, I don´t hear and fan noise, or the beeping sound. This Mac is 1 1/2 months old. Can anyone  help.

    I press the on button and the white light wont turn on, I don´t hear and fan noise, or the beeping sound. This Mac is 1 1/2 months old. Can anyone  help.

    You are under warranty. You can call Applecare and get advice from the tech rep, or you can bring it to an Apple store or authorized Apple service provider.

Maybe you are looking for

  • JDBC Receiver channel

    Hi, I have a receiver channel of JDBC type. The database configured in this channel is installed on a different net from XI. Is this a problem? I have seen an error connection of this type: Error during database connection to the database URL 'jdbc:o

  • PDF Printing Limitations FOP & Cocoon?

    Iam trying to export a report with more than 500 rows into a pdf. Iam using fop + cocoon and the pdf is broken with more than 500 rows. Are there any limitations when exporting to pdf? Iam using cocoon-2.1.11 and tomcat 5.5 Does anyone knows whether

  • Trouble to install the software

    My imac is Yosemite 10.10.3, 16GB HD, Intel core i7, NVIDIA GT 750. I did the download FCX trial, but I can't install the software.This is error message when I try install "FinalCutProTrial10.1.4. erro-4960"

  • Business content activation in a fresh implementation

    Dear Gurus Before i begin let me state that i did check and did get information about activation...my concern is that i am new to implementation and  i want to know exactly what are the steps that need to be followed at R3 end and in BI when we imlpe

  • Can't find how to adjust quality of clone tool

    I can't figure out how to adjust the quality of the clone tool, it has very large pixels now - can anyone help?