I cant turn on the coockies when i go to the tools --- options--- privacy and choose use custom sitting for history and click OK. Then o go back nothing changed

i cant turn on the coockies when i go to the tools --->options--->privacy and choose use custom sitting for history and click OK. Then o go back nothing changed

Note that the "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings. 
Firefox shows the "Use custom settings for history" selection as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made. 
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History" (Never remember history means that Private Browsing mode is active).
"Use custom settings for history" stays selected if at least one of the History or Cookie settings is not the default to make you aware that changes from the defaults are made.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved

Similar Messages

Cannot change setting in privacy from remember history to use custom settings for history. I can set in to change but on closing with the ok button thus closing the privacy tab, it then reverts back to remember history.

I have been by a web sit that the cookies are disabled in the browser. on looking at the help on firefox help the instuction as i understand was to change the setting under the privacy tab ref history fromthe default setting of rember hhistory to use custom settings for history. I change the setting click ok but it reverts back to rember history. I just cannot change the setting.This also happend in the prevous version.

To see History and Cookie settings in Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
You need to make at least one change to make "Use Custom settings" stay selected.
If all history settings are the default then the History and Cookie setting revert to "Remember history" the next time you open Tools > Options > Privacy.
So it looks that your cookie setting are already correct.
* http://kb.mozillazine.org/Cookies
* http://kb.mozillazine.org/Websites_report_cookies_are_disabled

I want to set Firefox to never remember history. When I do this using the tools tab and click okay, it goes right back to "Use Custom Settings for History". I don't want that.

I know how to manage privacy using the tools tab at the top of the address bar, or so I thought. I want to choose "Never Remember History". When I do that, and click "OK", the next time I check the privacy settings, the history is right back to "Use custom settings for history". I don't want this. Also, I don't want to use autocomplete for forms, but I can't get those settings to stay, either. I basically don't want info. stored on this computer. My system was hacked several months ago, by some joker who named all my system folders a racist slur (I reported it to Norton, and a technician had a look at it). Anyway, I want to keep things as safe as possible. Please allow me to delete all my history when I close Firefox. I don't really like Google, either, because they have a reputation for not respecting people's privacy. I don't like that I didn't have an option to uncheck google's toolbar when I installed Firefox.
Thank you.

That is probably OK. 
You may have changed one of the other history or cookie settings.
If Firefox shows the "Use custom settings for history" setting then that is an indication that at least one of the history and cookie settings are not the default to make you aware that changes were made.

Even though I set "Use custom settings for history" when I close the window and recheck it has set itself back to "Rember History"..why?

I am having trouble getting the settings to stay and can't figure out why...no matter what I do it just resets every time back to the
"Remember History" and it won't save passwords on some of my sites.

Firefox shows the "(Never) Remember history" choice if all the history and cookie setting are the default. 
Make at least one change to the default setting if you want "Use custom settings for history" to stay selected. 
Otherwise Firefox will revert to "(Never) Remember history" if you return to the Privacy tab. 
The choice "Use custom settings for history" will stay selected as long as not all settings are the default to make you aware that you made changes. 
* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"
* Websites remembering you and automatically log you in is stored in a cookie.
* You need an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep that cookie, especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all cookies, images, pop-up windows, software installation, and password exceptions.
See also:
* http://kb.mozillazine.org/Cookies
* [[Enabling and disabling cookies]]

When I try to set my 'History Setting' to 'Use custom settings for history' it doesn't appply - it continually defults to 'Never Remember History' - how do I fix it?

When I got into my 'History Setting' and click on 'Use custom settings for history' it doesn't apply. I click on the 'OK' tab and it appears to apply and then closes. When I go back into it, in order to see if it applied, it has reset back to the 'Never Remember History'. How do I fix it?

If "Never Remember History" is displayed then that means that you are in Private Browsing mode and that all other history settings have the default value.
*https://support.mozilla.com/kb/Private+Browsing
If you intend to run Firefox in Private Browsing mode the that is OK. 
Otherwise you need to leave mode.
To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
* Deselect: [ ] "Permanent Private Browsing mode"

After upgrading to FF 7. When I change my Privacy settings to Use custom settings and check ok, the changes are not saved.

Using Win 7 sp1
FireFox 7.0.1
In Privacy Settings: When I change the FireFox will: to "use custom settings for history" and check ok, the setting isn't saved. After I close, then reopen the Privacy Settings tab, the setting for FireFox will: is back to "remember history"
Thank you

You can try to delete the cookies.sqlite and permissions.sqlite files in the Firefox profile folder.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Director: Show Folder (Linux: Open Director; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can inspect and manage the permissions for the domain in the currently selected tab via these steps:
*Click the "Site Identity Button" (globe/padlock) on the location bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

|Tools Options Privacy:"Keep until" option is blanked out, as are 3 "remember history" options, "Clear history when..." and "settings", how do I get them back?

The Use custom settings for history is chosen:
"Accept cookies from sites"
and
"Accept third party cookies"
are both ticked,
but I want to be able to say yes or no to cookies!

Happy to help.

When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

HT201406 my i phone 5 screen wont unlock. The slide to open wont open the phone. Cant turn it off because you have to slide the button across as well

my i phone 5 screen wont unlock. The slide to open wont open the phone. Cant turn it off because you have to slide the button across as well

Perform a Reset...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Is there anyway to disable the chime when I accidentally catch the microphone icon while texting (phone is in silent mode)

Hi all,
I might be being a little dull here, but my question is exacly as in the title: Is there anyway to disable the chime when I accidentally catch the microphone icon while texting (phone is in silent mode)? I have fat fingers occasionally and whilst people at work don't mind private phone usage to have it occasionally activating the mic and then me cancelling it a little annoying.
Any suggestions?
Thanks
Dave

There is a proximity sensor that should turn the screen off when you place the phone near your face. Do you have a case that's blocking this? Try removing your case. If no case, try restoring you iPhone. If still a problem, return it to Apple for a warranty replacement.

PLS-00103: Encountered the symbol "" when expecting one of the following:

Hi I am creating trigger using CFQUERY tag of cold fusion on oracle..
<CFQUERY DATASOURCE="CRM">
create or replace trigger AWC_ACCESSROLESID_TRI
before insert on AWC_ACCESSROLES
for each row
begin
select AWC_ACCESSROLESID_SEQ.nextval into :new.AR_ID from dual;
end;
</CFQUERY>
But the created trigger is not compiled, it is giving the following error
"Line # = 1 Column # = 6 Error Text = PLS-00103: Encountered the symbol "" when expecting one of the following: begin case declare exit for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge <a single-quoted SQL string> pipe The symbol "" was ignored."
If I edit that trigger in enterprose manager console by pressing space and compile that, it is working fine with out any error. If i run the above statement in sql *plus, It is working fine with out any error.
Can you please tell me why this is happening if i run it using cfquery tag and also the possible solutions.
Thanks in advance,
Vinod

So it works in Enterprise manager. It works in SQL*Plus. It doesn't work in CFQUERY. Sounds to me like a ColdFusion problem rather than an Oracle problem to be honest. Aren't there any ColdFusion support resources?
Cheers, APC

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks

sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.

The operation can't be completed because you don't have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

The operation can’t be completed because you don’t have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section?

I use my camera for video and photos. When I download my videos to my ipad1 using the camera connection kit, they will not play on my ipad. Is there a way I can get them to play?

I use my camera for video and photos. When I download my videos to my ipad1 using the camera connection kit, they will not play.
Does anyone know how I can make this work?

Yvonne-
I haven't tried videos on my camera yet. Do you use the Videos App to play them? I don't think they will play in the Photos App.
If yours are in a format that is not in Vazandrew's list, you may need to sync them to your computer and convert them to M4V or MP4 format. You can use a program like HandBrake to do the conversion. <HandBrake> Once converted, you can sync them back to the iPad and they should play.
This may not meet your needs, but the alternative appears to be getting a different camera. I don't know of another Video App that might work.
Fred

I cant turn on the coockies when i go to the tools --- options--- privacy and choose use custom sitting for history and click OK. Then o go back nothing changed

Similar Messages

Maybe you are looking for