I cant upgrade from 10.5.0.142, missing msi file?

i can't upgrade itunes on a pc (XP) from 10.5.0.142. It stops and can't find the correct msi file.

It is iTunes.msi.
perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select anyiTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Similar Messages

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Cant upgrade from Acrobat 9 Pro to Acrobat 9 Pro extended

Hello everyone,
I purchased the upgrade from Acrobat 9 Pro to Acrobat 9 Pro Extended, but get an error when I try to install. The error says "Setup has detected that you already have a more functional product installed. Setup will now terminate.". How is it that Acrobat pro is "more functional" then pro extended. I bought the upgrade because I need the 3d capabilities of extended pro. How do I work around this issue?

Oops. I just read that I need to uninstall acrobat 9 first. I now have a new issue. Acrobat extended installed fine, but now it is doing an upgrade check. It is asking for the serial number for the acrobat 9 pro. My old version was part of the Creative suite 4. When I enter the serial number from the creative suite it comes back as an invalid number. Why is this?

Cant upgrade from logic 7.0

when i try and install the upgrade from 7.0 to 7.0.1 or any other update, it says it cannot find logic in applications. when i launch logic it launches fine.
any reason for this?

Hi,
The Logic Application HAS TO BE in the following folder:
Macintosh HD / Applications/ IN HERE
If you have moved it to another location, that is why your Mac cannot update it...
Cheers

Unalbe to upgrade iTunes missing *.msi file

Windows 7. Folder containing iTunes was deleted, not uninstalled, now I am not able to upgradeiTunes. continue to receive missing *.msi filre msg. I have unistalled any remainign items from control panel. Still not able to upgrade

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Cant upgrade from 10.3.2 to 10.6.8 bill of materials needed

error reads bill of materials needed? how do i fix or get .bom file?
Thanks

I should rephrase that, for those Macs that shipped new with 10.7 or later, the only way to get 10.6.8 or earlier running is through virtualization of the server operating system. When I say "new" that means the way my tip 6841 identifies them.
MacBook Pro 9,x and higher
Mac Pro EMC# 2629, and Mac Pro 6,x and later
Mac Mini 5,x and later
iMac 12,1 i3 (EMC 2496 on foot, MC978LL/A), iMac 13,1 and later
MacBook Air 4,x and later
All MacBooks (without Air or Pro designation) can at least use the system specific 10.6 installer disk that shipped with them if they are newer than 10.6's August 28, 2009 release.
Anything older you should at least be able to get a system specific 10.6 installer if not the retail disk.
The retail 10.6 disk that is available now works on pre-March 15, 2010 Macs. To be more specific on those Macs, that means:
iMac 11,1 and older
Mac Mini 3,x and older
MacBook 6,1 and older
MacBook Pro 5,x and older
MacPro 4,x and older
MacBook Air 2,x and older
can all use the current 10.6 retail available from the Apple Store.
Macs that fall between those criteria must use the 10.6 installer that shipped with them to install 10.6.

Upgrading from Logic Platinum to Logic 8 - No files just the software

Hi,
I've had a few years away from composing music and have recently started again. I have a license and XS Key for Logic Platinum and want to upgrade to Logic 8.0. I don't need to move any old files over, just upgrade and start afresh. Can I just buy the upgrade pack and that will prompt me for my dongle and XS key?
Thanks
Ben

You don't need to install any of 7 (or 8), it will just ask you for either an earlier serial number or a dongle.

Upgraded from E8 to E10 cannot access img files

Have been looking all over the net for 5 days now trying to find a answer to my question   Adobe help in India simply could not get me from A to B.
The sites I have been reviewing, have solutions at the software level, talking in computer language which means nothing to me. I am not a computer expert at any level other than at the keyboard level, in other words, just a computer user.
My E10 organizer has all of the thumb nails.   However, All photos taken in a vertical format, have yellow question marks. All but a very small number of Photos taken in the horzontal format do not have a ? mark. I cannot reconnect to any of img files.
All of my photo image/files are on a external drive E: Nothing on (photowise) on C: .   All of my attempts to reconnect have failed?
Can some one give me simple sttep by step instruction on how I can reconnect?
Thank you

Hi Ken
Everything appears to have reconnected.............except all photos shot in the vertical position have not reconnected and have yellow question marks.   A very few photos in the horzontal format have the same problem.
I followed your instruction with directing to the E drive to reconnect and everything except the above seems to have hooked out (I have about 3000 photo files) but what has caused the above and how do I reconnect with those?
There is something around 450 files affected
Also the reconnect window.......I really don't understant how to use the darn thing.   There is the left side and the right side neither of which seems to interact with the other.   Can you direct me to an instruction page on how to use the window.?
Thanks
Tom

NB550D - Upgrade from Windows 7 Starter to Professional

Dear All,
I recently bought a Toshiba NB550D and need to upgrade the pre-installed Windows 7 Starter to Windows 7 Pro. I tried the (preinstalled) Anytime Upgrade Wizard but this does not work. I get stuck in the wizard because - as he tells me - "You might need to change locale or language settings to purchase Windows Anytime Upgrade online". I learned that in order to use Anytime Upgrade the locale settings must be identical to those of the country where your billing address is located. For me this country is Switzerland, so everything needs to be in German.
The problem is, the Windows 7 Starter installation always uses English as "Display Language" and this cannot be modifed after installation. I tried rolling back the installation but there is no choice possible, it is always English. All other locale and language settings can be modified.
My questions:
- Is there a way to force the display language of Windows 7 Starter to German (either before or after initial installation)?
- Is there a way to upgrade to Windows 7 Pro circumventing the problem, e.g. by using a different approach than the anytime upgrade wizard?
- Any other suggestions which might help?
Thank you
gg

Hi buddy,
This is depending on the preinstalled Windows 7 Starter. If Windows 7 Starter was preinstalled in English language just an upgrade to an English version of Windows 7 Professional is possible. So you cant upgrade from English to German for example, therefore you have to buy a new Windows 7 version.
So either you buy a new Windows 7 Professional version in German or you upgrade to Windows 7 Ultimate. The Ultimate version provides MUI (Multilingual User Interface).

Upgrade from cs5 to cs6 will not install

Hi, I purchased and downloaded the upgrade from CS5 to CS6 including the Akamai installer. but the upgrade will not install and I am unable to contact Adobe anywhere for a solution to my issue. I have uninstalled CS5 using Adobe CC Cleaner and it still won't install. Help!!!

Upgrade from CS5 to CS6
I downloaded 2 files;
Photoshop_13_LS16.exe 1.2MB
Photoshop_13LS16.7z 1.1GB
plus the instructions file
(I've downloaded these files now 3 times and tried them all)

I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later. But I have version 8.1.2. I don't know what to do. I've been able to import in the past.

I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later. But I have version 8.1.2. I don't know what to do. I've been able to import in the past.

Sounds like an issue with the iPhoto Library
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

Cant upgrade my iOS from 5.1.1 to 6.

im using iPhone 4s (Factory Unlock) but i Cant upgrade my iOS from 5.1.1 to 6. after 90% of download an error cameup and stop downloading. Tried several time to download, whats the problem ? what should i do ?

This message indicates that your phone was hacked or jailbroken to unlock it.
Then when you updated/restored your phone it locked back up to the original carrier.
Only the carrier that the phone is locked to can unlock it.

An i4 MC603ZA cant upgrade iOS from 4.2.1 to 4.3.2 and show "This device isn't eligible for the requested build"

An i4 MC603ZA cant upgrade iOS from 4.2.1 to 4.3.2 and show "This device isn't eligible for the requested build"

Back up your iphone. Erase all content and settings and try to update again. Also on you computer make sure your signed in as the administrator and All antivirus and firewalls are disabled. http://support.apple.com/kb/ts4451

Hey, I Upgraded from 7, to 8. I'm using a Powerbook G4, with Mac OS 10.5.8, MY question is: im unalble to click on the channel strip to add plugins. actually, I cant click on a lot of options, mainly things with scroll down menus ie... busses, aux.. HELP!

Hey, I Upgraded from LOGIC 7, to 8. I'm using a Powerbook G4, with Mac OS 10.5.8, MY question is: im unalble to click on the channel strip to add plugins. actually, I cant click on a lot of options, mainly things with scroll down menus ie... busses, aux.. HELP!

Hey, I Upgraded from LOGIC 7, to 8. I'm using a Powerbook G4, with Mac OS 10.5.8, MY question is: im unalble to click on the channel strip to add plugins. actually, I cant click on a lot of options, mainly things with scroll down menus ie... busses, aux.. HELP!

I cant upgrade from 10.5.0.142, missing msi file?

Similar Messages

Maybe you are looking for