I cant use Crossfade tool

I have read through the discussions on here and they dont really apply to my problem. I bounced in place two mono vocal tracks into stereo. I did this for multiple singers in one project. I cut the region where i want to use the fade tool to fade out. It works on some of the bounced tracks and some it doesnt. I turned off all channel plugins such as compressors. I can not understand. In the inspector window when highlighting the track i want to use the fade tool on I can change the fade out parameters but I dont see the face on the actual region.
I am sure there is a simple explanation for this but sometimes I just forget how to do things.

i'm still having this issue, any help/tips would be greatly appreciated

Similar Messages

  • Cant use some tools in tools panel

    Some tools in the tools panel are inop namely, spot healing brush, clone stamp and brushes when image is opened
    using Mini Bridge. Regular Bridge is OK no problem. CS5/Win7 64.

    Tools become unavailable depending on the context of what layer you have selected, whether the image mode is compatible, etc. etc.
    Are you absolutely sure you're seeing the exact same conditions in cases where the tools are unavailable as when they are available?  I suspect something's different.
    Please do screen grabs of the same image showing each case and posting them here.  Perhaps one of us will spot something.
    -Noel

  • I cant use my tool bar! CS6 Indesign

    Every time I select anything the hand/zoom tool shows and will not let me do anything, I have tried using the shortcuts and it will not let me do anything. I have also uninstalled and reinstalled the software and have the same issue. HELP!

    i'm still having this issue, any help/tips would be greatly appreciated

  • HT200055 I have flattened a take folder, but Logic Pro X will still not let me use the crossfade tool on the clip.

    I have flattened a take folder, but Logic Pro X will still not let me use the crossfade tool on the clip.  How can I crossfade a flattened take folder?

    Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
    Best of luck.

  • Hi I just changed from cs3 to photoshop cc and cant locate the tools bar usually at the top? Need to use the ruler tool?

    Hi I just changed from cs3 to photoshop cc and cant locate the tools bar usually at the top? Need to use the ruler tool?

    What operating system are you using?
    You don't see the tool options bar  (Window>Options) or your looking for the Analysis Menu which is now under Image>Analysis?
    You can also get select the ruler tool from the toolbox

  • I have a little drop box in top left of screen telling me about a new version. How do I get that box of my screen. I cant use tool bar cause its blocked by drop box. I need it off my screen asap

    I have a little drop box in top left of screen telling me about a new version. How do I get that box of my screen. I cant use tool bar cause its blocked by drop box. I need it off my screen asap

    Do you have any reason to stay with Firefox 3.0.19 and not updating to Firefox 3.5.x or 3.6.x ?
    What is the update setting?
    Tools > Options > Advanced > Update
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    # Shockwave Flash 10.0 r32
    # Java Plug-in 1.6.0 for Netscape Navigator (DLL Helper)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Crossfade Tool not working

    Ok, I admit, I have never liked this tool, but just to be mature about it, I thought I'd give it a try. And I can't get the crossfade tool to work... at all. I'm following along with the Apple Pro training series book LP 7 and Logic Express... none of what this tool is supposed to be doing is happening in any file that I open up. Am I that stupid? Am I missing something completely obvious? Aren't you supposed to be able to select the tool and drag it over a bit of audio? Or if you drag it over 2 adjacent bits of audio, you'll get a crossfade, right? Is there some pref somewhere I forgot to set? These are normal audio files... not Apple loops or anything. I even tried it on tracks I recorded myself.
    Deeply Ashamed,
    Fadeless

    Hi,
    Assuming the simplest possible setup of 2 audio regions on the same track (either non-contiguous regions of the same audio file, or, two completely unrelated pieces of audio)...
    Test #1
    1. Drag Mode = Overlap
    2. Butt the two piece of audio together. The left-most piece is #1, the other is #2
    3. Use the x-fade tool and drag from the end of the #1 into the beginning of #2
    4. Click on #1 and look at the parameter readout on the left. What (if anything) does it say in the "Fade" field?
    Test #2
    1. Drag Mode = Overlap
    2. Make sure there's a small space between #1 and #2 (like a 1/4 note or so)
    3. Click on #1
    4. In the parameter column on the left, click/hold to the right of "Fade" and change to "EqP"
    5. Using the mouse or direct numerical entry, change the value of "0" to "1000" or so. Does a green, equal power crossfade appear area across both audio regions?
    Test#3 -- if none of those tests produces a green shaded area of crossfading...
    1. Make sure there's a space between #1 and #2, as before
    2. Click on #1
    3. Click/hold to the right of "Fade" and select "Out"
    4. Enter (or mouse) a value of 500. Do you see green fade-out shading on #1?
    Curious to know what your results are for these tests...

  • The page jumps across the page removing the slide bar making me loose access to everything , can close the program but cant use it as a intenet source any help on what i cna do to fix this ? thanks

    Ihave installed firefox but cant use it as a service for internet i can open it up and after 2 seconds of it loading the slider bar dissapears and the whole web page shifts to the right making only half the page visiable

    This issue can be caused by the Babylon Toolbar 1.1.8 extension (Tools > Add-ons > Extensions)
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Hi, Cant use Query builder in Apps. Because there is no Foreign Keys define

    Hi,
    We Cant use any Query Builder (SqlDeveloper) in Oracle Apps.
    Because there is no Foreign Keys defined on the table except primary key.
    I agree that common colums are there on different table,
    But it's bit difficult to digout for numbers of tables from different modules (schema).
    Do any one have any query which can find common colums from different tables though the tables may or may not be from different Schemas too.
    Thanks in advance.
    Bachan

    >
    Due to performance oracle has not applied constraints
    on tables except Primary Key.
    I find this hard to believe. The most likely reason for this, is to speed up inserts, but thats only applicable if you have lots of inserts at the same time.
    But they have given eTRM to refer the forigen columns
    on different tables.
    Forigen column is just for name shake there is no
    constraint available except Primary key.
    And whenever we have to make query and apply join, we
    have to dig a lot.
    Even we cant use Sqldeveloper Query builder, which is
    a dam good tool for making Joins and query.
    My problem is the Time and effort which we have to
    put for diging tables.
    just want to reduce that with some intleactual
    Query.You will get quicker as you get more experienced. Of course, everytime you have a query to do a specific job you could save it in an appropriately named file and store it in your source control system.
    >
    Can u help me with names of the Tables which store
    information about tables, schema, columns, index, and
    views.select * from dictionary

  • Cant find extract tool in photoshop elements 9.0

    I working on a project and I have a pic where I'm trying to remove background from around and between the hair. I looked on youtube for some tutorials and the video i saw said to use the extract tool and that it should be in my brushes. I cant find this tool anywhere. Can anyone tell me where it is and if so how to find it, r if there's another way for me to remove the bg without using the extract tool.Thanks.

    ThIs forum is targeted to PSE.
    Please post your picture for guidance. You can post it here, or use www.pixentral.com. For the latter, post the URL in this thread so that we may open it.

  • Suddenly with version 9 and 10 i cant use the shortcut command of ctrl+shift+t to open the most recently closed tab.

    Suddenly with version 9 and 10 i cant use the shortcut command of ctrl+shift+t to open the most recently closed tab. a feature used several times a day, previously. This is very Frustrating to me, i have tried looking up a tool keyconfig 20110522 and looked that it says that ctrl+shift+t is the right command, but i still cant use it WHY oh WHY?? if i could get some help figuring this out it would be so awesome, cause i love Firefox, been using it almost daily for the last 10 or so years and i don't intend to switch soon.

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] This is a temporary diagnostic session and you can exit anytime and start Firefox normally again. This session disables all the '''Extensions''', themes ('''Appearance''') and '''Plugins''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''.
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

  • Crossfade tool and audio tracks

    I am unable to use the crossfade tool on some of my audio tracks, and on others it works.
    I am creating basic audio tracks and on most of them the Inspector does not show the fade in /fade out parameters. The user manual says that you cannot use fades on Apple loop files, but I am jsut creating audio files with real instruments. Thanks for any suggestions.

    I upgraded to Logic Express 9 and have not had the problem.
    I might have done something to the particular track I was trying to fade out,but who knows?

  • Why wont my crossfade tool work?

    When I select the crossfade tool and drag it from one region to the other, sometimes it works and sometimes it just doesn't. The regions are touching, even when I zoom in to the finest resolution. This is extremely frustrating. Don't stop reading and start posting. Finish reading my post.
    I stumbled upon at least one thread where someone was encountering a similar problem, but it was archived, so I couldn't post my discovery there.
    If you drag one of the regions, drop it, then drag it back to its original position, the crossfade tool works. This obviously isn't ideal, but at least it works. If anyone has a better solution for me, I'd love to hear it.
    I didn't see anywhere where I could use the marquee tool to highlight the desired region for the Xfade, then use a key command to set the fade. Why, oh why can't you do this, Logic? WHY!!?!?!?!!!!!

    Check that you're audio files are uncompressed AIFF or WAV. If you have imported anything into your project like an mp3 or m4a file, it may not have been converted to uncompressed audio file, and you won't be able to create crossfades.
    You can do this by selecting the regions you want to edit and under the audio heading in the tool bar, select "convert regions to new audio files". I thought I had set up Logic to do this automatically when importing, but it did not happen for me just recently.
    I think it's a really good idea to save your new project AS SOON AS YOU CREATE IT, before you've done any importing or recording. This way you have a proper project folder established and files in folders where they're supposed to be right from the start.
    Hope that helps.

  • I cant find the "tools" button on firefox 4

    I'm trying to use add ons and it says "to use go to "tools" " and i cant find the TOOLS button.

    {Ctrl + Shft + A} will open the Addons tab.
    The orange Firefox button is the default for 4.0b11, it shows when the Menu bar is hidden. To un-hide the Menu bar temporarily hit the '''Alt''' key. To have the Menu bar show all the time, you need to click on it in the View > Toolbars menu - Menu bar, or by right-clicking on the Navigation bar and clicking on Menu bar.

  • Crossfade Tool

    Hi,
    I've just today moved over from Cubase to Logic (after many months of deliberation) and so far so good. I'm just trying to get accustomed to the basic everyday functions I need to use. The one thing I'm having trouble with is trying to do cross fades and fade in/out with audio clips. I've been using the crossfade tool as suggested in the manual but it doesn't seem to be doing anything. Basically I'm just clicking and dragging the crossfade tool over the region i wish to fade. Any suggestions as to what I'm doing wrong?
    Many thanks
    T

    See this recent thread:
    http://discussions.apple.com/thread.jspa?threadID=1945939&tstart=30

Maybe you are looking for