I cant use de usb ports on the dtu

how can put in automatic the deteccion of usb ports on the DTU?
i have a sunray server whit centos linux 5.3

Hi Pedro! No, I don't have service pack 2. I shall download it now and see what happens. The power is 250V but they do have their own adapters. They were working just fine before, somehow, I can't use them now. What do you think I should do? and thank you.

Similar Messages

  • MBA will not allow me to use both usb ports at the same time.

    My MBA will not allow me to use both usb ports at the same time. as soon as i plug the second in the first is disabled. trying to use a modem and printer.

    What kind of peripherals are you connecting? Sometimes if an external device is drawing too much power, then it will shut down one of the USB ports. Make a test connecting two usb flash drives, it should work ok.

  • MacBook Pro 13" 2011 - Won't let me use 2 USB ports at the same **** time.

    I'm trying to use 2 usb driven hardware devices at the same time and it won't let me - one of them always disconnects (usually the 2nd port) ...even though both devices work on other macbooks ive used lately..
    Is it possible one of them isnt properly powered? Is there any way of "turning" them both on?
    Sorry I sound so novice, i've had macs for 10+ years but i've never had this problem before...

    USB ports on a computer have always had a limited amount of power. The least expensive solution is to get a powered USB hub, meaning it has a separate power supply. The hub will provide enough power to keep things running.
    It will also make your extenal hard drives behave better it they are USB-powered.
    Here's an example:
    Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC

  • How do I use my ipod in the car without it constantly charging?  I have to use a docking cable into the USB port because the 3.5 mm to 3.5mm jack I bought doesn't work on the ipod.

    How do I use my ipod in the car without it constantly charging?  I have to use a docking cable into the USB port because the 3.5mm to 3.5mm jack I bought doesn't work with the ipod (although it does work with an MP3 player).  My ipod is a 5th generation 80GB classic.

    I know this is old - but did you ever get this working. Thinking of getting a 780 ti card and I have an older mac with the mini-displayport too.

  • HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    Go through this support doc:
    OS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

    In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

    It's not that simple. You need a "smart" device to connect a hard drive to, like a Time Capsule, or another computer, or an Airport Extreme/Express that was made to share a drive, or some other brand router that has a USB port for sharing a drive, etc.

  • Can a USB Keyboard/Barcode reader be used with the USB port on the CRio

    Is it possible to use a USB Keyboard or Barcode reader with the USB port on the CRio, I know you can use this port with a USB memory device, but what about other devices?
    I have a project that requires that all hardware elements be connected to the controller and use the HMI purely for display,
    anybody any ideas?? 

    Hi kmoyna,
    The standard CompactRIO range's USB host ports are not suitable for standard USB devices like keyboards or barcode readers - they are intended only for use of mass storage devices. From your description, it seems your project's requirements would be best met by the newer models, cRIO-9081 or cRIO-9082. These two units have Windows Embedded Standard 7 (WES7) and allow the direct connection of a monitor and standard USB devices. We now also have similar stand-alone CompactDAQ models running WES7 - cDAQ 9139.
    I would recommend calling into your local branch to discuss your project further with one of our engineers. If you're in the UK, it's 01635 523 545 - or view contact details for other branches.
    Regards,
    Imtiaz Chowdhury
    Head of Digital Technologies
    Brand786

  • I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

    I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

    Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
    Retry Windows Explorer and see if your camera is showing. If so try LR import again.

  • How can I connect my iPad to a TV that only has an s-video input available but also has a usb port on the satellite box available.

    I would like to connect my iPad to my older TV but the only inputs available are the s-video input port on the TV itself and there is also a USB input port on the satellite box that feeds the TV. I could also split all the RCA jacks to accomodate another input here. Thanks in advance for any and all help with this problem of mine..............RR.

    There is no s-video cable available for any iPad.
    The USB port on the cable box is for maintenance use only.
    There are RCA cables available:
    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a

  • My Macbook Pro Retina's USB port on the right side not working at all

    Dear all,
    I received my macbook pro 15inch with retina display a week ago, but not until today had I got the chance to use the USB port on the right side, only to find out that it is not connecting to anything at all. I have tried to use my iPhone 4 and iPad 3 with two different cables, my USB thumb drive, and my Blackberry 9900, none of them are charging nor shown in iTunes/Finder. All of above works on the left and on other windows machines too.
    I'm also not able to charge my Blackberry with the usb port on the left side, thought it would pop up a message saying "charging not supported" on the phone.
    For you information, I have applied both updates including the one released few days ago. I have also tried to reset the PRAM. Also, I have migrated from my old late 2008 13inch unibody Macbook using Migration Assistant, not sure if this would affect anything.
    I'm aware that there have been reports and discussions regarding the USB port not been able to run devices on 3.0 speed, but I wonder if anyone else have the same problem with me, where the port simply not connecting to anything at all?

    I also have a problem with the USB port on the right side of my Retina MBP.  The USB3.0 port on the left side works fine, even with high speed external SSD enclosures, like the OWC Mercury Extreme Pro 6G which enables me to copy large files at a sustained rate of 160-170MB/sec.  Wow USB3.0 and the Mercury SSD is a FAAAAST combination connected to the Retina MBP.
    However, like the forum entries about the USB3.0 ports in general on the new Retina MBP, the USB3.0 port on the RIGHT side is plagued with dropping intermittently, disconnecting my external hard drives while copying large files AS WELL AS disconnecting while just sitting there connected to an external hard drive and doing nothing.
    Therefore, since I don't feel like returning my Retina MBP and waiting weeks for a replacement, I have chosen to only use the left side USB3.0 port for now.
    I have my suspicions about why the right side USB port might be more problematic than the left side one.  I found this older post on the internet about how "Not all USB ports are created equal on MacBooks..." that talks about how on older models of MacBooks one of the USB ports shares a USB hub with multiple other devices like the iSight camera etc. therefore making it less tolerant of heavy traffic or something like that.  (http://www.wired.com/gadgetlab/2008/05/the-macbook-all/)
    Therefore, I wonder if the right side USB port is sharing a USB internal hub where-as the left side one is more 'dedicated' and therefore in my case able to handle the high speed transfers/traffic I am throwing at it with my external SSDs.
    I have also read that USB3.0 in general, on non-Macs, has had trouble for years.  For instance, some forum entries on Apple Support Communities and other non-Apple forums has made mention that 'they' are not surprised at the problems encountered on USB3.0 external hard drives connected to the Retina MBP because Windows laptops have had a lot of flakey problems with USB3.0 for 'years'. 
    Also, I have recently purchased a "Buffalo" external Thunderbolt 1TB drive from OWC and have been doing Clones onto that drive for several weeks.  I use SuperDuper to clone >600GB of data on my 768GB Retina MBP several times a week.  And, I have (knock on wood) not had any problems with the stability of my externally connected Thunderbolt drive.
    So, in my case, I am racking it up to high-speed stresses on the USB3.0 ports at least in part...and perhaps the possibility that the LEFT side USB port on the Retina MBP is more dependable and/or a more dedicated USB port than the right side one.
    This doesn't really solve your problem, but it may at least help you feel like you are not alone.

  • Can't use front USB port for external Hard Drive

    I have had some problems for about the past year with the front USB port on my 2009 13in Macbook Pro 5.5.
    As you know, there are 2 USB ports on the left side on a 13inch Macbook pro.  The one closest to me (the front one) works fine when I use it with a flash drive.  But when I connect my external 7200RPM external drive to it, after about a minute, it ejects then re-recognizes the disk. 
    I video edit with FCP and use the external as one of my scratch disks. 
    At first I thought maybe it was the cord or the drive that was messed up.  But then I connected my other external drive to this port and the same thing happened.
    But when I connected it to the back USB port, everything works fine. I haven't had any trouble.  So i make sure it's connected to that port when using the external.
    Why would this be happening.  It only screws up when using a standard external drive but not flash drives or any other peripherals.
    Thanks
    Brandon

    Exactly what Ogelthorpe mentioned.
    I bought a Seagate 500GB 7200RPM and bought an external case from Staples that has a big fancy led to show HD activity.  Sometimes it works and sometimes it doesn't.
    Tested it on my PC and it works all the time so it got me stumped.  Thought it was my MB.
    Decided to try another external drive drive on my MB and everything works.  So I returned the fancy external enclosure and bought the simple $10 one.
    Now everything works fine.
    Maybe changing your external case might help you.

  • Because of to much energy needed some of my usb port in the front hve been unactivated pls tell me how to reactivate these 2 usb port located in front

    because of to much energy needed some of my usb port in the front hve been unactivated pls tell me how to reactivate these 2 usb port located in front
    my mac pro is an early 2008 intel xeon hapertown
    thanks a lot
    patrick stanley thiollet

    Thought you could use this info about getting FireWire to work!   First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
    Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 15 minutes. plug it back in and try FW.
      If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
    If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release. 
    A bad internal PRAM battery can also cause FireWire to not be recognized, so make sure it's good!   Also, here is Apple doc.#88338 on getting FireWire to work.
    Here's another Fw Faq.

  • Can anyone explain when the USB port on the Express is really needed?

    Back with another question!
    My Airport Express is used only for my Canon printer (MP980), nothing else. I know, with hooking up my new Mac Mini, I'll get new drivers from Apple and will need to install some of the updated software from Canon... from what I've read, I won't try to use the disc that originally came with the printer.
    Since I'll join my Airport network for printing after my older Mini is disconnected, when is there a need to use the USB port on the Express? I've read that it's used for connecting multiple computers to the network. But, I'm having some confusion with this. With my network up and running, I assume I would be able to use my old Mini and the new Mini on the same network, if I decided to unplug one and use the other one for a short time, since my network settings won't change. (I have but one monitor!). Is a USB connection to the printer only required if multiple computers are shared simultaneously with the printer via Airport Express?? I never really understood this completely. All I expect to do for a few months is occasionally unplug one Mini for the other as I save some files onto disc, etc.
    Did I make sense?

    JiminReno wrote:
    Back with another question!
    hello again, jim !
    Since I'll join my Airport network for printing after my older Mini is disconnected, when is there a need to use the USB port on the Express?
    you can hook up a printer (or a Keyspan remote to control iTunes). one aspect may be location. what if you want the printer in a different room or on a different floor in the house ?
    I've read that it's used for connecting multiple computers to the network. But, I'm having some confusion with this. With my network up and running, I assume I would be able to use my old Mini and the new Mini on the same network, if I decided to unplug one and use the other one for a short time, since my network settings won't change. (I have but one monitor!).
    yes, you can also share a printer connected to your mini with other client machines.
    btw, you could use the +screen sharing+ feature to access and manage the screenless mini.
    Is a USB connection to the printer only required if multiple computers are shared simultaneously with the printer via Airport Express??
    no, all machines on your network could use a printer connected to either of your mini's or connected to the AX.

Maybe you are looking for

  • Updating array data in sql database

    HI, Im facing problems in updating array data in SQL database. As of now, i am able to write an "insert" query and insert array data in an image datatype field. Im using image datatype because the array size is very big(around 80,000 x and y values).

  • How to create a JBOD without formatting one of the hard drives

    Hi, I'm using a QWC Mercury Elite Pro external hard drive with 2 500Gb hard disks as my video scratch disk. I have configured them as 2 separate disks and been using CCC to copy the 1st drives content to 2nd drive. Now, the 1st drive is almost full.

  • CJK characters are not converted correctly to PDF

    We are developing layout using SMARTFORMS. We are using standard function module 'CONVERT_OTFSPOOLJOB_2_PDF'  to convert the SMARTFORM to PDF. Chinese, Japanese, Korean characters are not displayed/Converted correctly in PDF documents. But in Spool t

  • How to set our own main application titlewindow  background color ?

    Hi guys   i stuck in a problem . i wanna change the background color of titlebar in adobe air . i am unable to set it by changing the systemchrome to none and      transparent to true . in flash builder 4 . Thanks and regards Mohit

  • Continous Authentication Popup for PI server while testing ABAP webservice

    Hi All, While testing ABAP webservice,authentication window for PI server pops up continously. I have created web service from SE37 for Z function module which is remote enabled. I can see that service and endpoint is created automatically. I have al