I cant use my bluetooth :( plz help

hi there ,,, I just bought 2 iphones 4 for me and for my wife , and I cant use the bluetooth on both of them , when I turn the bluetooth on it keep searching but nothing appear , I cant either pair it with my macbook pro ,, I can find it when I search from my mac and when i send the request it gives me the pass number but when i press pair it fails
PLEASE HELP ,,, I have this problem on both of our iphones ,
thanks ,,,
Dr. Aws Maan

You already got the answer.
The iPhone bluetooth ONLY supports connections for headsets, and tethering an Internet connection (only if your phone is set up to do that). You cannot transfer files from a computer using bluetooth. Even if it did work, bluetooth is terribly slow. I doubt you would want to wait on it.

Similar Messages

Why my id lockd i cant use the phone plz help me

why my id lockd i cant use the phone plz help me i changeing the id and password but the same ur id locked helpppp

None of your fellow users in this forum would know why your AppleID
is locked.
You may wish to follow the following links for assistance:
http://www.apple.com/support/itunes/contact/
https://getsupport.apple.com/Issues.action
http://support.apple.com/en-us/TS244

My icloud id has been disabled because i forgot my password now i cant start my phone. plz help me

my icloud id has been disabled because i forgot my password now i cant start my phone. plz help me

Locked Out, Forgot Lock or Restrictions Passcode, Need to Restore Your Device: Alternative Solutions
    1. Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    2. Use iTunes to restore your iOS device to factory settings - Apple Support
    3. About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
If all else fails: Place your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

My iphone 4 has been stolen from 25bus at near to Stratford yesterday,can apple track my phone anyhow by using imei? plz help me.

my iphone 4 has been stolen from 25bus at near to Stratford yesterday,can apple track my phone anyhow by using imei? plz help me to fond it out.

No. You can do it if you have Find My iPhone installed/enabled on your iPhone though, but only if the phone is still turned on

TS1292 Cannot use itunes card says already been redeemed but havent used it it plz help

Cannot use itunes card says already been redeemed but havent used it it plz help
<Edited By Host>

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here. I've asked the hosts to change the title of your post as it appears to include the card number.
You've tried logging out and back into your account to see if the amount from it has been added to your account ? If it isn't then was the card complete when you bought it i.e. the part that you scratch off to uncover the code was still on the card ? If it was, and you've double-checked that you are entering the correct code, then try contacting iTunes Support (they might want images of the card and the receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Hi, im using iphone4 baseband 4.11.08 version 5.0.1(9A405) but cant use my sim..help me please

hi, im using iphone4 baseband 4.11.08 version 5.0.1(9A405) but cant use my sim..help me please

If your phone is carrier locked, ONLY the carrier it is locked to can authorize unlocking it. Contact them.

HT201365 i forget my icloud and my iphone5 i cant use it can u help me i have my box and buying bill

i forget my icloud and my iphone5 i cant use it can u help me i have my box and buying bil

Unfortunately, unless you know the Apple ID, there is absolutely nothing that can be done, you cannot use your mobile device. You may be able to find your Apple ID at Look up your old and forgotten Apple ID

TS3212 im trying to reinstall but will not allow, due to an error 7, itunes helper not installed correctly,i have tried several times, but will not allow me to install, i have used itunes for years but now cant use it, can you help

i have tried to reinstall itunes because it is saying i cant use my itunes due to an error 7, itunes helper not installed correctly, please reinstall, i have tried several times but still not allowing me to use, ive never had this problem before in all the years i have used itunes, i have gone through all the troubleshooting but still no access, can you help

Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

TS2446 when i want download any app from appstore i cant cus this message plz help me apple

i have big proplem plz help me apple pl
when i down anything from appstore iphone
your apple id has been disabled
help me i cry

You'll need to contact support and ask them why my friend.
https://expresslane.apple.com/GetproductgroupList.action

HT201441 hi i cant activate my iphone 5 after update ot ios 7. i have only one apple id , but when i enter i see that i cant activate with this id. I cant use my iphone pls help me how to activate

hi my id is do** @gmail.com, I buy from BG Globul on 9.9.2013. When i upgrade on ios 7 i cant activte becouse when i enter id and pass for appstore i see that i cant activate the phone with this id.
I dont have another id
Pls help me!
<Personal Information Edited by Host>

Hello GDonkov,
I'd suggest taking a look through the following article for information and steps that can help get your iPhone activated.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Allen

I tried to charge my iPod Touch 5th generation but it died while charging and it was tuning and it said i had to connect to iTunes so i did and i had to restore it to use it and while restoring an error code (9) appered and i can't use it. Plz help

   So I was using my iPod Touch 5th generation and the charger wouldnt charge it and it died then while it was in the process of tuening back on the apple logo dissapeered and it kept on turning on and off so i put it into DFU mode and it said to plug it into itunes to i did and it said i had to restore it to use it but when i tried to restore it it brought up ," Couldnt restore ipod, error code (9) " ..... and i have tried 3 different USB cables and two different computers and USB ports and i have no clue what to do so i would like help from anyone please that would be awesome!!!!
                    Thank you,
                                       Zac

Zac henderson wrote:
...Couldnt restore ipod, error code (9) " ...
Try here > Configure security software

Cant use 1440x900 in MAcMini Help ASAP!!!!!!!

I have serious problems using my LCD widescreen display (viewsonic VA1903wb) I already have 3 macminis in my office and any of those 3 can use 1440x900 in a regular basis.
Some times, I start it up and it switches to a 1440x900 (the ideal, clear and crisp graphics resolution for my LCD) but when I restart or shutdown/start or Sleep, the resolution change to 1280x960 or 1400x1050 (normal view streched to the wide ratio)
It *****, because im a graphic designer, and all my work look stretched.
and need help for this problem ASAP!!!!
PS. I have a Cube G4 WITH THE SAME DISPLAY, AND O PROBLEMS, never change the resolution by itself.

Check out this thread:
http://discussions.apple.com/thread.jspa?messageID=5499693&#5499693
Unfortunately it doesn't conclude with certainty, but it seems that Viewsonic has an architecture bug that doesn't allow a host system (Mac mini in this case) to power the I2C bus and EDID-containing ROM that lives inside the Viewsonic. That's a violation of the VESA standard for the plug and display interface. Either take it back for a refund or repurpose it to a PC, which doesn't rely on plug and display in the same ways a Mac does, if at all.
In my experience on these forums, it seems Viewsonic is not a Mac friendly company and I would recommend to anyone with a Mac to avoid them.

HT4759 last friday my iphone 5 hold up of two people plss help me to block my phone so they cant use my iphone plss help me apple.. i have a serial number of my iphone 5 i bought imy iphone in japan.. and iit is not open line here.. only wifi it can used.

last friday night my iphone5 hold up with two bud guys.. how can i block it so they connot used anymore my phone plss help me apple..i have a serial number here ti keep it so i thonk it can used i bought my iphone in japan.. THIS ISMY SERIAL NUMBER HELP ME PLSS APPLE ( serial nu.F1*****TWG ) iphone 5 32GB plss help me to block it right now.. godbless..
<edited by host>

Hello Renvin29,
It sounds like you need to disable your iPhone remotely. I'm sorry to hear about your phone! The only way to do this with is Apple services is if you had Find my iPhone enabled. You have 2 options:
You can use this article to put the phone into Lost Mode and preserve your data on it, but prevent access to it:
iCloud: Use Lost Mode
http://support.apple.com/kb/PH2700
Or you can just erase it remotely outright:
iCloud: Erase your device
http://support.apple.com/kb/PH2701
You should also take a look at this article for additional info on what to do about this situation:
If your iPhone, iPad, or iPod touch is lost or stolen
http://support.apple.com/kb/HT5668
Thank you for using Apple Support Communities.
Take care,
Sterling

I cant find my ipod plz help me, i cant find my ipod plz help me

so one stole it and they have it but wonht tell the real thing. so help me use locator to find my ipod

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How do I copy a file to a remote server using runtime exec - plz Help!

Hi,
I am trying to copy a file to a remote server using a runtime exec command as follows:
Runtime.getRuntime().exec("scp "+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_JAR)+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_JAR_NAME)+".jar "+" "+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_TWO_USERNAME)+"@"+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_TWO_URL)+":"+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_TWO_JAR));
Problem is this statement does not execute, as when I try it directly on command line, it requests for a password. Any suggestions on how I can get rid of that? I think I might have to configure my ssh_config file, but when I did some "Googling", I found the configuration settings of a ssh2_config file. I tried those (changing it to Host-based Authentication), but it didn't recognise them. Please help, this is so urgent!
Regards,
Simz

Don't use Runtime.exec (or ProcessBuilder) for this. Check out JSch at JCraft (or some other Java SSH API.

I cant use my bluetooth :( plz help

Similar Messages

Maybe you are looking for