I cant use my I.M services
After i update my phone using my phone i cant be able to use my yahoo chat. What should i do?
Btw my phone unit is C3
Similar Messages
-
Ihave installed firefox but cant use it as a service for internet i can open it up and after 2 seconds of it loading the slider bar dissapears and the whole web page shifts to the right making only half the page visiable
This issue can be caused by the Babylon Toolbar 1.1.8 extension (Tools > Add-ons > Extensions)
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
HT5824 upgraded to ios7 on iphone4 now cant use location service and cant open restriction passcode
Have upgraded my iphone4 from ios6 to ios7. Now cant use location service. im sure i havent ever put in a restriction passcode, but it wont accept any I put in
Have upgraded my iphone4 from ios6 to ios7. Now cant use location service. im sure i havent ever put in a restriction passcode, but it wont accept any I put in
-
i cant use facetime. but my sister can. we share the same account for itunes.but when i go to facetime on my ipod touch and click on create a new account a blank screen pops up and the only thing it says is cancel and account. what do i do?
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
ISight Problem - cant use it anymore while not beeing recognized...
hello,
the well known classical problem. no application can recognize my iSight any longer.
had done the recommendings from apple support site without any success. sometimes the isight works - for example one time in 3 weeks - than again not.
i am angry about the fact that apple dont create some patch or whatever to solve this problem. any other suggestions instead of this:
http://www.codium.co.nz/isight_fix/
which had worked for me one time?
so i pay a lot of money for this macbook pro and cant use it completely. but yes - it looks sooooooo nice.
great job apple guys, much more bigger job - mr. job. so solve this problem. i am not the only one if you just use google for one time.ResEdi wrote:
hello,
the well known classical problem. no application can recognize my iSight any longer.
had done the recommendings from apple support site without any success.
You have not tried all recommendings:
Final relevant suggestion from http://support.apple.com/kb/HT2090
"If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service."
...sometimes the isight works - for example one time in 3 weeks - than again not...
Intermittent problems like yours are usually caused by hardware problems. Regardless of whether your MBP is still in warranty or covered by AppleCare, your AASP can fix your MBP.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
There is an red screen in my iphone 6 and i cant use it
there is an red screen or only apple logo, and i cant use my iphone 6
Try resetting:
Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
Try restoring:
http://support.apple.com/kb/HT1414
If neither works, take the phone in for service, it has a hardware issue. -
How to get Itunes to actually work? cant use it. Help
Since upgrade nothing is working right. It doesn't recognize my iphone or ipad, evrything that I need to do is grayed out where I cant use it. What is the use of having this if it isnt going to work? It doesn't sync, won't let me restore from backup. Totally worthless now.
Alternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID -
Recently i have updated my iphone 4 to latest 4.3.5 update using itunes... from the time i have updated... i am facing problems... like touch sensitivity... like cant attend the call at one swipe... cant use any applications at the corner of the screen... some times i touch message icon... it moves to next page... some times in the applications without touching the screen in the app the features get activated... is it the problem with the software update or my iphone is having any problem with screen...
please let me know what should i do...Do the basic troubleshooting steps described in the User Guide, Appendix B:
Restart phone
Reset phone
Restore in iTunes using a backup
Restore as a new iPhone, without using a backup.
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
Also, remove any screen protector.
If none of the above works, there is a hardware problem that needs evaluation by Apple or whoever provides iPhone warranty service in your country. -
For itunes 10.7 it is saying that my mac need version OS X needs to be version 10.8.6 - how do i get this? There are no current software updates and i cant use iTunes for my new iphone 5
I think you meant 10.6.8, not 10.8.6
It requires an upgrade, instead of a free update.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57 -
the inner screen to my ipod 4th gen is cracked at first it was no big deal but now the screen keeps flickering and i cant use it. a grey spot appeared andnow it takes up 1/4 of the screen what should i do?.need help, i also dont have the warranty any more.
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
Using message-style web service by a Microsoft client
Does anyone have a sample Microsoft client using message-style web service? BEA
does not provide one. I found MS client does not receive messages published between
2 calls to method "receive", while the sample Java client ConsumerClient.java
does.
ConsumerClient.java is like:
while(true){
Object result = method.invoke(null);
sleep(20000); // not in sample, added for my test
System.out.println(result);
My VBScript code is like:
Set SC = CreateObject("MSSOAP.SoapClient")
SC.mssoapinit "http://localhost:7001/msg/Receiver/Receiver.wsdl", "", "", ""
While TRUE
Res = SC.receive
WScript.echo "Res = " & Res
Res = ""
' do something that takes 20 seconds
Wend
I added 20 seconds between calls so I can publish a message between 2 calls. I
found the Java client receives the message but the VBScript client doesn't. Has
anyone else observed this?Hi Kevin,
Thanks for your feedback.
Header support is planed for the next major release.
regards,
-manoj
Kevin Jiang wrote:
Hi Manoj,
Can you use SOAP header to pass session id accross instead of HTTP header? MS
SOAP toolkit 2.0 support access to SOAP header.
My app needs to use topic instead of queue. But as I said earlier, I can use MS
XML toolkit to access HTTP header. So I have a work around.
Thanks for all your responses with regard to this question!
Kevin
manoj cheenath <[email protected]> wrote:
Hum! i thought you were not able to receive message at all. now
i understood the problem. yes we are using http header to pass
session id accross, in the case of web service client who wants
to subscribe to JMS topics. I cant think of any other way to do
this. if you have any suggestions, i very much like to hear it.
for your application is it possible to use queues instead of topics?
we do not use http session information in the case of JMS queues.
-manoj
Kevin Jiang wrote:
Hi Manoj,
Your sample code is basically same as mine. It would also lose messagespublished
between calls to "receive" method.
I figured out what's going on. Undocumented by BEA, the web servicesends JMS
session ID in HTTP header along with first message. When client makessubsequent
calls to "receive", this ID must be sent back. I found this by usinga SOAP trace
tool.
Unfortunately, MS SOAP toolkit doesn't support access to HTTP header.So one has
to use MS XML toolkit to use message-style web service, when writingMS clients.
manoj cheenath <[email protected]> wrote:
an example of using message style web services with
ms soap toolkit is attached. let me know if this works
for you.
regards,
-manoj
Kevin Jiang wrote:
Hi Manoj,
I just changed anyType to string and the problem still happens.
Thanks,
Kevin
manoj cheenath <[email protected]> wrote:
I have not tryed message style web services with MS soap toolkit.
I think the problem is because the WSDL for the message style
web service use xsd:anyType as the return type and MS soap is
not able to understand it. can you pls modify the xsd:anyType to
xsd:string (or someother base type) in the WSDL.
SC.mssoapinit can load wsdl stored as a local file. so it should
be easy to make this change.
regards,
-manoj
Kevin Jiang wrote:
Does anyone have a sample Microsoft client using message-style
web
service? BEA
does not provide one. I found MS client does not receive messages
published
between
2 calls to method "receive", while the sample Java client ConsumerClient.java
does.
ConsumerClient.java is like:
while(true){
Object result = method.invoke(null);
sleep(20000); // not in sample, added for my test
System.out.println(result);
My VBScript code is like:
Set SC = CreateObject("MSSOAP.SoapClient")
SC.mssoapinit "http://localhost:7001/msg/Receiver/Receiver.wsdl",
While TRUE
Res = SC.receive
WScript.echo "Res = " & Res
Res = ""
' do something that takes 20 seconds
Wend
I added 20 seconds between calls so I can publish a message between2 calls. I
found the Java client receives the message but the VBScript clientdoesn't. Has
anyone else observed this? -
Cant use Blackberry 8300 in Bangladesh
Hi,
I m from bangladesh. I have buy a blackberry-8300 mobile from Dubai and i have use it n there. when i back on bangladesh and insert the Bangladeshi SIM card into the mobile, i cant use it. as because when i insert the Bangladeshi SIM card into the mobile and power on, its give a message as "Insert SIM card". and then i can browse all of the menu. But cant make any call.
Here i have to mention that, when i insert the SIM, which i use in dubai then the Mobile is behave normally.
Can u please give me the proper procedure to make the solution of this problem?
Best Regards,
Mohammad Zahirul Islam
Insoft Systems Ltd.
EDIT: Removed personal information
Message Edited by Andy on 07-25-2008 07:21 AMBlackBerry built carrier specific devices. Almost every carrier have these device locked to network. Meaning a device from one carrier won't work in other network/country. What you're face after inserting SIM is the reason of that. You can purchase unlock codes from GSM Phone Source or Unlock BlackBerry. But again carriers follow a policy where you can have BlackBerry services only if you avail their bundled package. Moreover, if your carrier is not allowed to have a specific device from RIM and you purchase an unlocked device from else where and somehow you become able to use then your carrier will not be able to provide after sales support for that particular device as they don't have it in their portfolio.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
E61 Downloaded latest software but now I cant use ...
I downloaded the latest software through nokia suit but now I cant use my e mails, it just has big (?)next to my e mail account, how do I delete these from my phone and start again with my service provider?
fatih ozkan wrote:
...T-mobile say you must ask apple.
Apple does not Unlock phones... T-mobile is giving you the runaround... Contact T-mobile as suggested. -
HT1665 how come i cant use other headphones or external speakers with my ipod
how come i cant use headphones or external speakers with my ipod.sood as you plug either in there is no sound.
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
i do it and you took all my credit ammount and say your credit was declined and still i cant use my account and my master is now empty so what is the proplem ???
and my mastercard company say you took more than 20 dollers and for 3 times i was put my creditYou are Not addressing Apple here...
This is a User to User Technical Support Forum and consequently a Public Forum and Not a good place to post your Credit Card information.
I have asked the Hosts to remove it.
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
Creation of 250+ custom UDFs in OIM 11gR2
We are working on a IAM implementation using OIM 11g R2. Our requirement is to add 250+ custom UDF attributes in user profile. We already have 100 UDFs and planning to create additional 150 UDFs. Could you please let us know if anyone of you have com
-
Access key requested when creating new program in abap editor
I am trying to create a new program in sap netweaver 7.01 trial version. netweaver promts me for creating object confirmation but after that I get a register object dialog box requesting an access key on the demosystem installation. where can I find
-
When I rent a movie from itunes library on my desktop it is not showing up under rented on my Apple tv? This has not happened before?. Can I rent or buy directly from Apple TV? I hope someone can answer this silly question. Carol
-
Mac pro charger green then turns red computer won't come on
I connect my charger to computer light green then immediately turns to red and computer tries to come up but cuts off. What could be the problem? Do I need another charger?
-
Any way to execute menu commands?
I'd like to execute the equivalent functionality to some existing menu commands in Bridge from a Bridge script. In particular, I'd like to be able to turn off the favorites panel and the folders panel (View/Favorites Panel) and (View/Folders Panel).