I canu00B4t configure the data supplier targets.

Good Morning.
I have a system SAP ABAP + JAVA Netweaver 2004s, with Windows 2003 Server and Oracle 10g.
When, I try to configure the data supplier targets, of the SLD. I have the following message error:
Can't store new target Error during write access to secure store (caused by: com.sap.security.core.server.securestorage.exception.ObjectStorageException)
How can I solve the problem??.
Best regards.
Luis Gomez.

Hi
Please check the SLD planning guide at
System Landscape Directory (SLD)
For details of how to setup sync options and what version and SP level these are available from
Best wishes
DStuart

Similar Messages

Configure Data Supplier targets in SLDs

I am trying to Configure data supplier targets in the SLD.
The source and target slds are @ same levels - SP 15 NWS 7.0 with PI usage type
In the source SLD i have added a SLD with the following parameters:
URL : http://<target_hostname>:5<target_ins_no>00/sld
user: SLDDSUSER
passw: *******
i started and stopped the SLD, but when i make any changes in the source system i am not able to find that data in the target system
I checked the logs and there is nothing there
I dont think so its related to my configuration because after removing the connection made and starting and stopping the SLD Server we have the same error in the logs
Do we have any guide for getting the right way how to configure the SLD Data Supplier targets ?
Rgds
aditya

Hi All,
The problem was with the manner in which i was testing this data supplier bridge.
I created a Technical System in SLD1 and thought it should get registered in both the SLD. But since these change dont go via the SLD Data Supplier Bridge these are not updated in SLD2
Later i took an ABAP System and pointed it to SLD1 using Tx RZ70 and the ABAP System was not only registered on SLD1 but the SLD Data Bridge passed this information to SLD2 as well
There is a Fully Syncronizing option in PI 7.1 which also helps in syncronizing the contents of two SLDs
The paramters i used
SLD URL: http://<hostname>:5<ins_no>00/sld
user : SLDDSUSER
pass: *******
THanks to all
Rgds
aditya

"Primitive Type Returned", when I try to configure the data return type.

I am basically following this tutorial, Getting started with ColdFusion and Flash Builder 4 beta, but instead of using the database provided, I am using SQL Server 2008. I am now stuck on the part titled, "Configuring the data return type". In step 5 of this section, I submit my credentials and then I get a popup titled:
Primitive Type Returned
The operation returned a response of the type "Object".
You may either update server code to fix the returned data or Click OK to set "Object" as the return type of this operation.
I am not sure if "server code" would be my database and/or the Coldfusion code that was provided in this tutorial. I am thinking that its the former, however I am new to both technologies. Would anyone know why FlashBuilder will not strong type this data for me?

Hi,
Thanks for your feedback!
The server code here means the ColdFusion code provided in the tutorial.
The "Configure return type" step is performed to change the return type of the function.
If you notice after importing the CFC in the Flash Builder the return type of getAllData was Object but with this step you are trying to change it to a Strong Type.
So context click on the getAllData function,select 'Configure return type', enter "EmployeeSalesData" click NEXT , enter valid RDS credentials in the security dialog and click FINISH.
This should have ideally set your return type to "EmployeeSalesData"(Strong type).
Also if you are extremely new to this i suggest you to pick up a pre-release build of Flash Builder which has a COOL feature which can help you get started pretty fast and simplify most of these workflows.
To avail for the pre-release build please send a mail to [email protected]
Hope this helps!
Thanks,
Balaji
http://balajisridhar.wordpress.com

How to configure the date format in toolbar of ADF Calendar

Hi,
In the weekly view of the ADF Calendar, the date on the toolbar of the calendar component is something like this "May 1,2011 - May 7,2011".
Is there a way to configure this. What changes need to be done to show this as "1 May 2011 - 7 May 2011".
Thanks,
Deepak

See Bug 13825615 - backport to 11.1.1.7.0 bug 13045234 - date format not supported in toolbar by ca

I cannot see all the data in target disk mode

I have an issue where my MacBook pro is not booting into the Yosemite. I see the progress bar hangs at about 45% on the startup screen. I called Apple support and they asked to use the target disk mode to connect to my mac and then copy data like that. I am using the same technique but I am not seeing all the data under users. My data under the folder users had another users data that I cannot see.
How can I see my data for all the other users? Help please!!!

Could be that the the data or directors on the HD are corrupted.
- Copy all data you can
- Try cloning the whole disk to another disk before you attempt recovery methods.
- Try repairing the HD via Disk Utility
- Try a data recovery program
http://data-recovery-software-review.toptenreviews.com/mac-recovery-software/

RTS and SLD data supplier

HI,
it's mandatory to define the environments used as runtime systems on a CMS track as data suppliers into the SLD server used by the JDI ?
Regards

No, I don't think so.
You configure the data supplier service in order for the system to auto-submit itself to an SLD, but this is not required for NWDI operation.

How to change the value of data supplier host parameter in PI7.1

Hi Frnds,
I want to change the data supplier host parameter to Hostname,when i checked in SLD Administration its pointing to local host,so i wnat to change it.
What is the procedure to change the value to host?? i am working on PI7.1 EHP1.
THANKS,
Raj

thanks

Where is the data source configuration in Jdev 11g?

Does anybody know where is the data source configuration in JDeveloper 11g? I want to create a JNDI data source using the database connection. Do I have to login the Integrated WLS to create the data source? Thanks.

Hi Chris,
Configuring the data source in Integrated WLS works for me. Thanks for your help!
Looks 11g didn't create the data source automatically in the App Navigator. I checked the deployed application directory - "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\adf\META-INF" and "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\META-INF". I didn't find the data source file - data-sources.xml. Then I started the web application and checked the Context, I can only find the data source which I defined in the Integrated WLS. It is interesting that 11g removed the JNDI list from the RMI bindings.
Also thanks to Nick for the information. We are migrating a Spring Framework application to Oracle and don't use ADF Business Components in this project.
Huaichen

Problem changing sld data supplier slddsuser to new userid in VA

We are experiencing lockouts with slddsuser in the SLD so I planned to change all fo the userid's under sld data suppliers to a unique userid for each client. I created a copy of user slddsuser in solution manager and made sure in the UME the new userid's had all of the same security. When I change the userid in sld data supplier in the J2EE the HTTP fails with a 403 http error. The CIM test also fails. The message says to verify the gateway and that the sld service is running which they are since I can change the userid back to slddsuser and everything works fine. What am I missing for security on the SLD side the new users are exactly the same as the slddsuser that works find??

Hi
One reason why no other user will work is because you would likely have to create any new users for each data supplier in the target SLDs UME
Actually I noticed in another thread a useful suggestion - its possible one of the data suppliers reflects the wrong password
or an old password for SLDDSUSER this could be causing the lock - unfortunately there is no easy way to identify this
- perhaps you could check the SLD logs (now and in future) and/or increase the trace level to diagnose
Best wishes
Stuart

Is it possible to save the data in the trend graphs?

I am making a HMI and want to user to be able to study earlier graphs. It would be best if this could be saved in a report or something.... I am using labview 8.0 and the DSC module. I understand that it is possible to save data in the citadel database, but I am not very familiar with database handeling and SQL, and this will be a difficult way for the users of my HMI to view data.... I am also interrested in showing alarm history in this report.....
Thanks in advance for your help!
-Mari

Hi friends,
With out scheduling the infopackage and DTP i want to upload the data into targets.
Please give me clear solution.
which function module i need to use for this.
how to write the sub routine.
Please could you give me solution clearly. i don't know ABAP very much.
Please help me.
Thanks,
Guna.
Edited by: gunasekhar raya on Sep 16, 2008 4:03 PM

How to load the data using a plsql table in ODI.

Hi All ,
Can anyone help me on this ?
We have a PLSQL procedure which returns a plsql table as out parameter.
We are supposed to load the data in to a file using this plsql table (Table type) in ODI.
Can this be done using ODI?
Regards,
Karthik+

Hi,
We have one process with a ref cursor (Oracle) as a source and remote Oracle DB as a target. I ended up writing my own KM that populates a global temporary table from the cursor first and then transfers the data to target. If temporary table is an option for you, the rest is pretty easy.
Regards.

Technical System (Application Server ABAP) - problem with data supplier

My system had problems, I believe with the Data Supplier in LMDB
there are errors
How can I update / re-add in the SLD/LMDB data supplier?
And how can you get it working correctly providers who do not receive the data (though the system sees them)

Hi Michael,
You can push an update from Solution Manager (the data supplier) to the SLD in transaction RZ70. There should be a button labeled "Start Data Collection and Job Scheduling". If your jobs are scheduled and everything is set up correctly, then starting your data collection will force an update ahead of schedule. (By default, the update is scheduled every 720 minutes -- i.e. 12 hours).
On the Java side, you need to push via the Visual Administrator (when you're at NW 7.02, that changes in 7.3 to the NWA), but you didn't ask that.
Typically, LMDB grabs an incremental update from SLD every 10 minutes or so. Check for a job called SAP_LMDB_LDB_0000000001. If your SLD-LMDB connection is not working properly, you may need to reset it. (SOLMAN_SETUP (as solman_admin or equivalent). Then system preparation -->5 Prepare Landscape). See SAP help on this Synchronization Between SLD and LMDB - SAP Solution Manager - SAP Library.
Also, on the first screen you showed, System Landscape Technical System - Display, if you click Edit, then click on the advanced button, there is an option to Resynchronize Technical System from SLD. I haven't tried that, but that may actually be what you're looking for.
I hope this helps!
Best regards,
--Tom

PI 7.1 - SLD Data Supplier issues

I am getting an error while clicking on "Collect and send data' in the SLD Data Supplier service in the NWA. The error is as follows:
http://<hostname>:<java port>/sld/ds, Status: 403, Message: Forbidden
I looked at all the places that I could think of. Any suggestions?
SLDCHECK works fine.
All the SM59 destinations work fine.
All the destinations in NWA for the Data supplier (SLD_DATASUPPLIER and SLD_CLIENT) work fine.
I am able to do the development in ES Builder fine. But, when it comes to the adapters, I am unable to see any of my adapters as my cache refreshes are failing. I started debugging this issue and stumbled upon the error in the SLD data supplier.
Thanks
Sridhar

Hi,
Please apply note:
#999962 - PI 7.10: Change passwords of PI service users
Regards,
Caio Cagnani

SLD - Data Suppliers

I have recently updated our solution Manager system to SPS22 with java.
Since then the Data Suppliers in the SLD are DOWN.
Administration > Details > Data suppliers
RFC server threads:
[DOWN] NUC:<server>_<port>_SLD_NUC_1448281814
[DOWN] UC ::<server>_<port>__SLD_UC_1102336995
[DOWN] NUC::<server>_<port>__SLD_NUC_2003281767
[DOWN] UC ::<server>_<port>__SLD_UC_1129708313
Can anybody tell me if there is a problem with the latest version of Java or tell me how to get the data suppliers back up?
Also the Landscape Fetch job now fails with The SLD server connection is inactive. Is this a consiquence of the data suppliers?
Hope you can help.
Russell Burrow

Hello,
Hope the SLD server is in Running status!
In ABAP stack, is the t-code SLDCHECK for the corresponding system working fine, all GREEN? If not working, check the RFC connection issues. The Landscape Fetch job would be failing due to the same reason.
In Java stack, in VA, check the SLD Datasupplier is working or not. Also check the CIM connectivity to SLD server. if not working, check what is the error.
Hope this helps.
Regards,
Bhaskar

Peristent Store does not show the Data Source in Wenlogic 12.1.3

Hi All,
I have installed WebLogic 12.1.3 on my windows machine using Java 8 and am trying to configure the Data Source and Persistent Store (of JDBC type).
I'm able to create a Generic Data Source of type - *Oracle's Driver (Thin) for Instance connections;Versions:Any. The test connection also was successful.
When i proceed with the creation of a Persistent Store - JDBC type, the Data Source created is not getting populated in the drop down across Data Source label.
Any suggestions as to why this is happening?? or What needs to be done by me to fix this issue?
I'm unable to proceed further with my configuration due to this.

Hi,
In order to use the JDBC persistence store you have to use a non XA JDBC driver for your Data Source.
http://docs.oracle.com/cd/E23943_01/web.1111/e13701/store.htm#CNFGD221
Point-13). When configuring a connection pool to use with WebLogic JMS JDBC Store, use non-XA database drivers.
http://middlewaremagic.com/weblogic/?p=586
Hope it helps

I canu00B4t configure the data supplier targets.

Similar Messages

Maybe you are looking for