I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What do I need to do?

I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What can I do.
I did try to download Firefox again, but still will not work.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Similar Messages

  • HT4623 My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath.  I can no longer get anything to work on the phone!!  Where to from here??

    My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath.  I can no longer get anything to work on the phone!!  Where to from here??

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • Upgrade from 10.3.9 to 10.4.10...can no longer get online

    hey,
    thanks for reading. went from panther to tiger last night. i did a complete erase and install of 10.4.6 on my Ti powerbook (867 Mhz processor, 1 GB ram). on reboot, my computer found my wireless network, i entered in the password, and it seemed to connect. i have all bars full on my reception meter thingy.
    anyway, when i started safari, the webpage said, "you are not connected to the internet. My internet settings are the same as my desktop settings (which is still running 10.3.9 and can still connect to the internet). i updated the OS to 10.4.10, same problem. reset the router, same problem.
    other info:
    1. installed the new operating system by utilizing disk mode for the laptop and connecting it to my desktop via firewire (laptop DVD isn't working right)
    2. when the computer comes on at first there is a folder with a question mark, then it turns to a smiley face, then the apple logo shows up and everything boots up fine.
    so, why can't my computer get online now?
    any help is greatly appreciated.
    thanks!

    Welcome to Apple Discussions!
    As far as I can tell, when you upgrade your system, the registration of the Media Access Control address gets dropped with certain cable and DSL modems if you have more than one machine on your network. Resetting the said modem's power by detaching it for 45 seconds and reconnecting it usually fixes the issue
    Edit:
    I should end that last sentence with: "as long as all the machines are up and running and requesting internet access from the modem that need access at the time the modem cycles its power back up."
    Message was edited by: a brody

  • No sound from HP G62 laptop and can no longer get sound from speakers or headphone jack . USB sworks

    have an HP G62 laptop.  I can no longer receive sound from speakers or from headphone jack.  If I plug speakers into usb - I will get sound.  Any ideas?

    I don't think I have anything to offer that you haven't done. In Device Manager, Device status says "working properly" and you've reinstalled this driver.
       Realtek Audio Driver for Windows XP
    Right?
    The only other thing I know to do is restore the hard drive to its original factory fresh contents.
    -Jerry

  • Changinf from EARTHLINK dial up to COX hi-speed cable

    I have the original IMAC flat screen that has operated flawlessly since new in 2002. OSX has been upgraded to Panther some time ago. I now want to change from EARTHLINK dial up to COX hi-speed cable. Please advise the appropriate methods, settings, etc., to keep the internet villans from harming my IMAC.

    Well, you really don't have to worry all that much. But it's really simple to set up a high-speed account.
    Normally, you'll get the cable modem before anything else. Don't touch it yet, though! After the internet is going to your house, then set up the cable modem. The first time you run it, hook it up to the computer, and it should prompt you to input the username and password, ect. That should be it. Just plug it in and you're ready to go!
    Of course, you should use COX's instructions over mine!

  • Change of ISP and can no longer connect with AE

    Well, I figured this would happen - I switched from AT&T DSL to Charter High-Speed Internet, and the darn cable modem is making my life difficult. When I plug in with an Ethernet cable to my laptop, no problems. But that's no fun.
    When I connect my AE, it's a different story. Connection bars are great (I'm less than five feet away from it now, but posting this using my neighbor's wireless), and the configuration looks just fine in the AirPort Setup Utility. The problem is that I simply can't get anywhere - it won't actually connect to a page. When I use the Apple DNS "test", it recognizes it as an apple.com website and inserts the proper "name", but the computer never gets there.
    What am I missing? Everything does look right on the AE configuration and my computer's wireless settings; I'm just not sure what's going on! Thanks!
    12" PowerBook G4   Mac OS X (10.4.5)   AirPort Extreme

    Already noted two things that I forgot - this is with Charter. I checked old posts on the topic, and some have noted a similar problem. This seems to have been resolved with the old 'unplug in random combinations' trick, but that hasn't worked for me yet. I've tried doing my computer, my modem, and my AE in all six permutations of order.
    I'm stuck. Thanks.

  • [svn:fx-trunk] 7661: Change from charset=iso-8859-1" to charset=utf-8" and save file with utf-8 encoding.

    Revision: 7661
    Author:   [email protected]
    Date:     2009-06-08 17:50:12 -0700 (Mon, 08 Jun 2009)
    Log Message:
    Change from charset=iso-8859-1" to charset=utf-8" and save file with utf-8 encoding.
    QA Notes:
    Doc Notes:
    Bugs: SDK-21636
    Reviewers: Corey
    Ticket Links:
        http://bugs.adobe.com/jira/browse/iso-8859
        http://bugs.adobe.com/jira/browse/utf-8
        http://bugs.adobe.com/jira/browse/utf-8
        http://bugs.adobe.com/jira/browse/SDK-21636
    Modified Paths:
        flex/sdk/trunk/templates/swfobject/index.template.html

    same problem here with wl8.1
    have you sold it and if yes, how?
    thanks

  • I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

    I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • Photos recently changed from sequential numbering to date/timestamp.  When I import into apps for editing they are out of order.  What can be done to change back to sequential numbering instead of date/timestamp?

    Photos recently changed from sequential numbering to date/timestamp.  When I import into apps for editing they are out of order.  What can be done to change back to sequential numbering instead of date/timestamp?

    The date information is taken from the camera which writes it to the file. This needs to be set to the correct date and time in the camera itself.
    The order the images are shown in the Library mode is set by clicking on the sort button in the tool bar, which if not showing can be activated from view, tool bar. There are different sort orders that can be applied including sorting by file name. You can also sort by dragging the images to the order you wish them to appear in by selecting user order.

  • I have 6p from a gift card left in the English store and can't spend it. I want to change to the Irish store as I have an Irish gift card for me to redeem but it won't let me change store. Also I don't want to use a credit card for the last 6p.

    I have 6p from a gift card left in the English store and can't spend it. I want to change to the Irish store as I have an Irish gift card for me to redeem but it won't let me change store. Also I don't want to use a credit card for the last 6p.

    See:
    How to manage unused iTunes Gift Card and Gift Certificate balances

  • I was trying to change from my iphone 4 to my new iphone 5, and i backed up my contacts onto iclould, when i restored my iphone 5 on my computer, the contacts were wiped from both devices, how do i recover the contacts?

    i was trying to change from my iphone 4 to my new iphone 5, and i backed up my contacts onto iclould, when i restored my iphone 5 on my computer, the contacts were wiped from both devices, how do i recover the contacts?

    On the iPhone tap Settings > iCloud
    Make sure Contacts is switched ON. It may take a few minutes for the data to sync via Wi-Fi.
    If you are using iCloud, there's no need to connect your iPhone to a computer via iTunes to sync your contacts.

  • I have a uk iTunes account but have moved to the Netherlands and can no longer connect to the iStore from my iPad. Do I need to update my iTunes account to a Dutch one?

    I have a uk iTunes account but have moved to the Netherlands and can no longer connect or make purchases. Do I need to change my account to a Dutch one?

    You can't transfer any content from one account to another account (nor can accounts be merged) - all content will remain tied to the account that downloaded it.
    Do you not have copies of all of your downloads e.g. on your computer or backup of your downloads/library ? Whilst you are in Australia you can't redownload your UK purchases (you have to be in a country to use its store), if you have them on your computer's iTunes library then you should be able to stream them from it to your Apple TV

  • The context has expired and can no longer be used. (Exception from HRESULT: 0×80090317)

    I have followed the instructions on this blog. http://blog.cloudshare.com/2012/10/22/how-to-fix-sharepoint-2013-web-application-error-the-context-has-expired-and-can-no-longer-be-used/ and
    it fixes the problem for a short time.  I have to keep doing IISResets to get my farm backup.  
    Please Help.

    Have you trid Ajay Khanna's suggestion from the comments field?
    From Central Admin- Select the web application and Select --> Web Application General Settings --> Navigate to 'Web page Security validation', change or disable the timeout field.
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)

    We have a problem with our wiki site collection. Once a day (and sometimes more), we get the following error message :
    The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)
    This message is displayed to everyone, and will stay there for an hour or so before the collection is back to life.
    Doing an iisreset would get the site working but that will last for a day at the most.
    This is what we checked and tried so far :
    1. Our time zones are set and are correct.
    2. Changing the timeout or disabling the web page security validation (followed by an iisreset) didn't work.
    3. All server use the same NTP server for time sync (and they are indeed in sync).
    4. It is happening only on the wiki collection, not the other collections.
    5. We are unable to reproduce the behavior on the staging servers.
    Some particularities :
    1. Regional settings are set to French (Canada)
    2. We have 500+ wiki pages in the site collection
    3. We require page check-out / check-in for editing. Tried without, same problem.
    Any ideas as to what should we try next ?
    Regards,
    homerggg

    Hi,
    I don't think we have changed them from the default, a quick look shows ours are set to:
    Token-timeout = 24hrs
    FormsTokenLifetime = 10hrs
    WindowsTokenLifetime = 10hrs
    LogonTokenCacheExpirationWindow = 10m
    Rob

  • I have my ACCOUNT in The US, Moved to Chile and wanted to change but since still have US$1.00 in my account can not do it and can't find anything for a buck... What can I do?

    Pls need help I have my ACCOUNT in The US, Moved to Chile and wanted to change but since still have US$1.00 in my account can not do it and can't find anything for a buck... What can I do?

    Changing your iTunes Store country:
    Sign in to the account for the iTunes Store region you'd like to use. If already signed in to an account, from Settings, choose Store and then View Account.
    Tap "Change Country of Region" and follow the on screen process of changing your region. Agree to the terms and conditions for the region if necessary, and then change your billing information.
    This is from http://support.apple.com/kb/HT1311
    If you get an error, then contact: http://www.apple.com/support/itunes/contact/

Maybe you are looking for