I changed my WRT54G security settings from WPA to WEP

I changed my WRT54G security settings from WPA to WEP and now one of my latops (Dell 5100) will not connect wirelessly. It is using a linksys wireless-B notebook adapter. I am at a loss at how to reconnect this to my wireless network.

Go to the setup page of the router on the wired computer and click on the Wireless tab,check the network name(SSID),change the Wireless Channel to 11-2.462 GHz,Keep the SSID broadcast enable and click on save settings...Click on the subtab Wireless Security and change the Security mode to WEP or WPA as per your requirement.If you are using WEP then,note down the KEY1 as the network key(case sensitive)...
Now,on the laptops,delete the preferred network and then,try to connect the Wireless Network.

Similar Messages

  • Problems auto-connecting after sleep & startup (Changed from WPA to WEP)

    Okay, I know there have been several issues similar to this, but after two days of sifting through posts, I still can't resolve this.
    A few days ago I switched my AirPort network security from WPA to WEP-128. This was required to allow my Nintendo DS to connect to the netwrok, by the way. After the change, two similar, but slightly different problems started:
    My 15" PowerBook G4 no longer auto-connects to the network at startup. The network is listed in the drop-down, and connects with no problem when I choose it manually. The computer seems to have no problem re-connecting after waking from sleep, which is odd because...
    My other PowerBook, a 12" G4, won't auto-connect at startup AND won't re-connect after sleep. As above, it has no problem connecting using the Keychain once the network is selected from the drop-down.
    So far I have tried, on both machines:
    - trashing the system airport prefs
    - deleting and resetting the network's keychain entry
    - repairing the keychain (no errors found)
    - turning off some unneeded power mgt options
    - disconnecting USB peripherals
    I have also reloaded the software on both my AirPort Extreme base and my AirPort Express hub, as well as restarting both hubs. I've also made sure that AirPort is at the top of the network connection list.
    Both laptops are running 10.4.3 and have all the latest software updates installed.
    What am I missing?
    Thanks.

    Both of these replies are helpful, in that they help confirm something I figured out this morning, almost accidentally.
    One thing I didn't mention was that during the change from WPA to WEP I changed the network password. Now, I assumed that since the Keychain seemed to be working and I could get on the network manually without needing to enter the password each time, that meant the new password had correctly propagated throughout the system.
    So, this morning I go into the Network settings, switch from Automatic to Preferred, select my network, look at the properties, and notice that somehow it has way too many bullets for that to be the correct password. I re-entered the password and that seems to have solved the problem. The new password I had entered somehow didn't make it into this setting. I guess trashing the network prefs, or renaming the network would have had the same effect.

  • CHANGE DEFAULT NAME/SECURITY SETTINGS = LOWER CONNECTION SPEED

    I have a Linksys WirelessN Router--If I use the router with all of the default settings I can achieve cable speeds of 300mbps. Fantasically fast!!! As soon as I change the name of the router from "Linksys" to any other name, my speed drops back down to 54mbps. I also changed the security settings to "PSK Personal" and added a personal password so my system wouldn't get "hyjacked." Any thoughts?

    Hi… logon to router’s setup page, try changing Radio band to wide 40MHz, wide channel to 9, standard channel to 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change N Transmission rate to 270MBps…wireless security should be PSK personal, also try upgrading latest firmware on router, check whether it makes any difference or not.

  • How do i change my virgin mobil mifi from WPA to WPA 2?

    I cannot connect my vm miFi and someone said I need to change the mifi from wpa to wpa 2, but I do not know how to do that!

    This is a support forum for Apple products and software.
    Apple does not make the mifi hardware or software.
    You need to find a support forum for mifi.

  • HT204266 I seem to have changed my App Store settings from uk to Australian.  How can I change this back?

    I tried to download an app for my ipad, and it seems I have changed my settings from UK to Australian.  How do I change them back.  I went into settings and my account still states UK.  Please help.

    See  >  Change your iTunes Store country
    Here  >  http://support.apple.com/kb/HT1311

  • Changing Airport Express security settings

    How do I change the security settings on my airport express so that my PS3 recognizes it?

    Jroosky wrote:
    How do I change the security settings on my airport express so that my PS3 recognizes it?
    Welcome to Apple's discussion groups.
    Launch AirPort Utility, select the AirPort Express on the left, and click "Manual Setup". Select the AirPort panel, Wireless tab. You should see the security settings in the lower part of that window. Once you change them, click the "Update" button.

  • How to export security settings from Acrobat Pro

    I'm transferring my Acrobat Pro to a new computer.  Is there a way to export the security settings (passwords) that I have stored and then import them into Acrobat Pro on my new computer?
    Thanks,
    Steve

    Hi Steve,
    The paths you are looking for are:
    Win XP
    C:\Documents and Settings\<user name¹>\Application Data\Adobe\Acrobat\<ver²>\Security
    Vista \ Win7
    C:\Users\<user name¹>\AppData\Roaming\Adobe\Acrobat\<ver²>\Security
    ¹The user name is the same as the login name
    ²ver is the major version (e.g. 8.0, 9.0)
    Note, if you don't see the folders in the Windows Explorer try the following:
    Start Windows Explorer
    Select the Tools > Folder Options menu item
    Select the View tab
    Select the Show hidden files and folders radio button
    Click the OK button on the Folder Option dialog
    Good hunting,
    Steve

  • Cannot access security settings from firefox dropdown box in Windows 7 home premium (laptop)

    This is a new HP laptop with Windows 7 Home premium
    There is not a firefox world in upper left corner, there is a box that says firefox with a drop down which does not include security settings.

    You have version 4.0.1. The Options dialog can be accessed either way --
    orange Firefox button > Options > Security tab
    Tools menu > Options > Security tab
    To display the classic menu bar temporarily, tap the Alt key or press F10. To make that permanent (and replace the orange Firefox button), use View > Toolbars > Menu Bar.
    Does that help?

  • TS2756 How do i change my Mobile Hotspot Security from WPA to WEP?

    I need help someone please

    Well try WEP security on your router and connect the DSi to the network and see you you can connect the iphone to the network with WEP.  I did find this https://discussions.apple.com/thread/1286293?start=0&tstart=0
    I am not sure what you want to do has to do with personal hotpsot though
    Message was edited by: Ocean20

  • Trying to add PC - Do I have to change from WPA to WEP?

    Here's my set up:
    iMac
    iBook
    Tiger
    Airport Express (Main BS)
    Airport Extreme (Remote BS)
    WPA & WPA2 encryption
    I've just got a laptop from work which is a PC running XP, but without Service Pack 2 as SP2 has, I'm told, all sorts of server related problems (don't ask me what these Microsoft bug ridden issues are, I just know I'm not allowed to download SP2)
    When I boot up my PC it recognises my network but when I try and type in my network password I'm being tod that the "network password needs to be 40bits or 104 bits depending on you network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters"
    The dialogue box that popped up before this where I was invited to enter my password told me that hte network requires a network key (WEP). But it doesn't it requires WPA.
    Now I'm not at all knowledgeable about WPA, WPA2 and WEP, but should I assume that I need to change my network encryption to WEP, if so is this less secure and how exactly to I go about doing that? I've had all sorts of problems in the past when I've meddled with my netwprk security. Should I change the settings on my remote BS and then the main, or the other way round.
    Seems a bit odd that the PC doesn't just ket me enter my password, but I guess that's Windozed forya!

    Even though Windows says it is connected to your wireless network, you cannot take Windows word for it. Most likely the PC has indeed failed to establish an authenticated wireless connection to your wireless network. Therefore, go through the process of setting up Windows to connect to your wireless network again, but this time enter the hex-format "network equivalent password" for your Base Station that you obtained with the help of the Airport Admin Utility.
    "Bonjour for Windows" isn't of any use for what you are trying to do. It is only helpful (though not essential) if you want to set up printing from the PC to a printer connected to either the Mac running 10.4 or the Airport Express.
    As for the oddness with getting the Macs to connect to each other - try using the manual connection method described in this passage I've copied from elsewhere:
    The first step is: on each computer, go into System Preferences, then Sharing, and turn on "Personal File Sharing". On that page, you'll see, at the top, the computer's name (which you can change), and at the bottom, the IP number (eg 10.0.1.2), which you may need as an alternative.
    Then, on each computer, go to Finder, then click on Network. You may straightaway see the other computer appear - you can click on it, click "Connect", and then either log in as a user (it has to be a user that's been set up on that machine), or a guest.
    As a guest, you can access all Public folders on the computer.
    As a user, you can access that user's Home folder
    As an admin user, you can access the whole hard drive.
    So, if you have different user accounts set up on the computers, it's best to use Guest access and then put the files you're sharing in your user's Public folder.
    Now, if that computer doesn't immediately appear, go to the Finder, click cmd-K (to open the Connect to Server dialogue), and type in
    afp://ip-address-of-other-computer
    eg afp://10.0.1.2
    You'll then get the same login dialogue as above.

  • Migrating security settings from embedded oc4j to preconfigured oc4j

    Hi,
    I was able to configure security in my 11g TP3 ADF application, and run it successfully against embedded oc4j.
    Now, when I want to migrate this to preconfigured oc4j, I am getting ERROR:null.
    Please see the steps I follow:
    set CLASSPATH=C:/JDeveloper/j2ee/home/jazn.jar;C:/JDeveloper/BC4J/lib/adf-share-base.jar;C:/JDeveloper/j2ee/home/lib/security-api.jar;
    After that, I run the migration tool:
    java oracle.security.jazn.tools.JAZNMigrationTool -sr jazn.com -dr jazn.com -st xml -dt
    xml -sf "C:\Documents and Settings\nneelaka\Application Data\JDeveloper\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\config
    \system-jazn-data.xml" -df "C:\Documents and Settings\nneelaka\Application Data\JDeveloper\oracle.adfp.seededoc4j.11.1.1.0.
    0.071218.1800\j2ee\home\config\system-jazn-data.xml" -m policy
    This is because, as I mentioned in the earlier mail, the webcenter preconfigured oc4j's configurations are read from the directory :
    C:\Documents and Settings\nneelaka\Application Data\JDeveloper\oracle.adfp.seededoc4j.11.1.1.0.
    0.071218.1800\j2ee\home\config\system-jazn-data.xml
    and, the embedded oc4j's configuration is read from the directory :
    C:\Documents and Settings\nneelaka\Application Data\JDeveloper\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\config
    \system-jazn-data.xml
    However, when I run the migration tool, I get a message ERROR:null. Also, I dont have adfshare.jar, and instead, I have put adf-share-base.jar. Is there something I could be missing here ? Please advise.
    Best Regards,
    nattu

    Hi,
    Try enabling java logging to see what the exact error is. That might give you an idea of what the error could be..
    When I tried, I got the below error though I added jps-common.jar, which contains CredStoreResources, into the classpath
    java.util.MissingResourceException: Can't find oracle.security.jps.internal.common.resources.credstore.CredStoreResources bundle
         at java.util.logging.Logger.setupResourceInfo(Logger.java:1293)
         at java.util.logging.Logger.<init>(Logger.java:203)
         at java.util.logging.Logger.getLogger(Logger.java:274)
         at oracle.security.jps.util.JpsLogger.getLogger(JpsLogger.java:108)
         at oracle.security.jps.service.credstore.CredentialAccessPermission.<clinit>(CredentialAccessPermission.java:60)
    ~ Bijesh
    P.S:check the destination file path. Are you sure that's correct. I believe It should be something like ""C:\Documents and Settings\nneelaka\Application Data\JDeveloper\system11.1.1.0.22.47.96\o.adfp.seededoc4j.11.1.1.0.
    0.071218.1800\j2ee\home\config\system-jazn-data.xml"

  • About migrating security settings from embedded oc4j to preconfigured oc4j

    Hi,
    I was able to configure security in my 11g TP3 ADF application, and run it successfully against embedded oc4j.
    Now, when I want to migrate this to preconfigured oc4j, I am getting ERROR:null.
    Please see the steps I follow:
    set CLASSPATH=C:/JDeveloper/j2ee/home/jazn.jar;C:/JDeveloper/BC4J/lib/adf-share-base.jar;C:/JDeveloper/j2ee/home/lib/security-api.jar;
    After that, I run the migration tool:
    java oracle.security.jazn.tools.JAZNMigrationTool -sr jazn.com -dr jazn.com -st xml -dt
    xml -sf "C:\Documents and Settings\nneelaka\Application Data\JDeveloper\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\config
    \system-jazn-data.xml" -df "C:\Documents and Settings\nneelaka\Application Data\JDeveloper\oracle.adfp.seededoc4j.11.1.1.0.
    0.071218.1800\j2ee\home\config\system-jazn-data.xml" -m policy
    This is because, as I mentioned in the earlier mail, the webcenter preconfigured oc4j's configurations are read from the directory :
    C:\Documents and Settings\nneelaka\Application Data\JDeveloper\oracle.adfp.seededoc4j.11.1.1.0.
    0.071218.1800\j2ee\home\config\system-jazn-data.xml
    and, the embedded oc4j's configuration is read from the directory :
    C:\Documents and Settings\nneelaka\Application Data\JDeveloper\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\config
    \system-jazn-data.xml
    However, when I run the migration tool, I get a message ERROR:null. Also, I dont have adfshare.jar, and instead, I have put adf-share-base.jar. Is there something I could be missing here ? Please advise.
    Best Regards,
    nattu

    Please post JDeveloper/ADF questions to the JDeveloper/ADF forum here on OTN.
    -steve-

  • Can a procedure have different security settings from the person running it

    I've seen on many occasions that people advocate updates to the database are performed through database procedures, and I'd like to do this. However, my understanding is that the procedure 'inherits' the security permissions of the user running it? If so, then how is it possible to 'expose' a procedure call to a user which allows them to perform inserts/updates/deletes etc, and yet at the same time, only allow the user to perform selects on the base table?
    I simply want to ensure that the database is protected from changes that do not go through 'proper channels'...
    Many thanks in advance.
    Carl.

    my understanding is that the procedure 'inherits' the security permissions of the user running it?This is not true, as it depends on the way the procedure has been defined. Which can be in two ways as Justin just explained.
    It's true when the procedure has been defined with 'invoker rights'.
    Default would however be that the procedure inherits the security permissions of the user that created the stored procedure (definer rights).

  • HT204053 change my iphone icloud settings from pc

    Change my settings on I cloud from computer

    Go to Settings>iCloud, tap Delete Account, then sign back in using the ID you use for iCloud on your iPad.
    When you delete the account, if you need to migrate the data on the phone to the other account, choose Keep on My iPhone, then sign into the other account, turn on your iCloud syncing and choose Merge to merge the data with the data already in the account.
    If your data is already in the other account, choose Delete from My iPhone and just sign into the other account and turn on your iCloud syncing.

  • How do you change the nominal range settings from 0-10v to 0-1v

    Currently using a PCI-6052E with Mac OS, how do you change the resolution accuracy? In other words from say
    0-10V full scale for an AI to 0-1V full scale?

    Here is the information that you should follow when using DAQ with a Macintosh. I'm not sure whether you are using LabVIEW or some other programming language, so the two main references that you should refer to are the NI-DAQ Software Reference Manual for Macintosh and the LabVIEW Data Acquisition VI Reference Manual. Both of these resources are excellent sources of information and will explain to you anything you need to know about programming DAQ on a Macintosh.
    The NI-DAQ Software Reference Manual for Macintosh can tell you how to configure things such as Analog Input Mode (differential, RSE, NRSE), Range, Polarity, Analog Output Range, P
    olarity, Voltage Source, etc. Even reading just the first chapters of either of the above mentioned reference manuals should have you on your way.
    Hope this helps.
    Jared A

Maybe you are looking for

  • Error when activating 0MAT_Plant.

    Hi Experts, I have added a custom created infoobject(Material Freight Group) as an attribute of 0MAT_PLANT.When i assign it as only display attribute,its activating.But when i change it to Naviagtional attribute,its giving me the error"Error activati

  • Before i did the update for Lion I had a icon for find my iPhone. Now its gone how do I find that icon on my Mac book pro

    Ok I am very unplease with this new Mac Book pro. i guess its not the computer but man when you get on any windows computer, they are all about the same and easy to use. i am having alot of problems trying to find things like where to burn a home mad

  • No input level in shoutcast

    Settings? Hello. I'm trying to play in radio. In theory everything is alright but........ When music is playing there should be some input level in shoutcast but there is 0!! Is there anyone who knows why? I have SB X-fi Audio THX Message Edited by Q

  • Link CP number and the PERNR

    Hi Guys, We are transferring Employee records friom ERP R/3 system to SRM using PFAL, CP number is created for every employee, I want to know the link between the CP number and PERNR in the IDOC., Please let me know how the CP numbers are generated.

  • Reorganize a big catalog in folders by date

    I typically import my photo's from my camera and reorganize the photos by date. However I just had several thousand old printed photographs scanned. I have: 1. Imported the photographs into a seperate new catalog 2. Labeled all the photographs with k