I Changed the Display from 60hz to 24 now no display Help, I Changed the Display from 60hz to 24 now no display Help

I am on a Mac G4 and just installed 10.5.8. I the System Preferences I selected Display and changed the display from 60 hz to 24. Now I get no display. Is there a way to revert back, or access the terminal to change the monitor back so it displays? I know I could reload but that takes a couple of hours.
Any Ideas?

Satrt in Safe Mode (Hold Shift while starting). That should allow you to restate the proper preferences in the Display preferences.
Be patient. Safe mode boots take longer.
If not, reset the PRAM:
Hold Cmd+Opt+P+R and start the computer. Hold the keys through two startup chimes and release. The machine should boot normally; settings will now be at default.
http://support.apple.com/kb/ht1379?viewlocale=it_it

Similar Messages

  • I want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os  from xp to win7 64 bit (i think that is the problem) how can i run my photoshop on this system?

    i want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os  from xp to win7 64 bit (i think that is the problem) how can i install and run my photoshop 5.0 le on this system?

    Kglad Creative Suite 2 is only applicable to individuals affected by the activation server shut down.  A complete list of affected software titles can be found at Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products.

  • Most times when I import photos from my desktop or dropbox to iPhoto, iPhoto will keep the title I created for the image as the display title under the image. but occasionally it displays the filename instead and I have to go back through and reenter

    most times when I import photos from my desktop or dropbox to iPhoto, iPhoto will keep the title I created for the image as the display title under the image. but occasionally it displays the filename instead and I have to go back through and reenter the title in iPhoto. why the inconsistency? running OS 10.9.5 and using iPhoto 9.5.1

    Try this:  select one of the photos that are showing the wrong title and use the Photos ➙ Batch Change ➙ Title to File Name menu option.
    See if that will put the name that you want under the thumbnail.

  • I receive emails from Sparklebox in the UK. Suddenly recently they are saying they are from Hugs and Cookies which is a recipe site in the USA. How do I change?

    Sparklebox is an educational resource site in the UK. I receive emails from them regularly.
    Suddenly a couple of weeks ago they started arriving stating that they are from Hugs and Cookies XOXO which a recipe site in the USA which I subscribe to.
    Can it please be changed back to reveal that they are from Sparklebox and not Hugs and Cookies XOXO?

    Sorry if you think the complaints about not being able to see your question are dumb. But it makes it very difficult and after complaining for over a year my frustration is very high.
    As for deleting the entry in your address book for Hugs and Cookies, it is nothing of the sort. Thunderbird uses your address book display name preferences to populate the from list.
    Of the last 100 people that came here complaining that mail from one person was actually from another. Their address book entry for that person was the issue in probably 99 of them.

  • I bought my 'air' in Australia the keyboard has a dollar sign, is there a way to change the setting so that a pound or a euro sign appears? I am from the UK and currently live in Spain!

    I bought my 'air' in Australia the keyboard has a dollar sign, is there a way to change the setting so that a pound or a euro sign appears? I am from the UK and currently live in Spain!

    Hi colin the card,
    Welcome to Apple Support Communities.
    It sounds like you purchased your device in a different country than the one you reside in and want to change the currency symbol typed from the keyboard. The article linked below will provide details about changing your MacBook Airs region and currency format.
    OS X Mavericks: Customize formats to display dates, times, and more
    http://support.apple.com/kb/PH14227
    I hope this helps.
    -Jason

  • The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

    The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

    If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
    http://www.apple.com/support/ipad/contact/.
    If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
    You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems.

  • We have an itunes account on our desktop and my kids have it on their ipod and iphone. I went in and changed our user name from my old e-mail address which is no longer accessible to my new one and now either of my kids can access the itunes store..

    We have an itunes account on our desktop and both my kids have it on iphone and ipod. I went in and changed out user name from an old e-mail address which is no longer accessible to my one I use now... When the kids try to sign onto the itunes store it tells them they have the wrong user name..
    Can this be fixed??

    Did you change the email address or create a new Apple ID?
    If the email address associated with the account was merely changed, sign out of the Apple ID on the devices and sign in using the new credentials.

  • Hi Apple Team, I would like to change the iCloud account on my iPhone, however it says I must 'delete the account' before doing so? Does this mean that I delete the entire existing account, or just delete it from my phone specifically?

    Hi Apple Team, I would like to change the iCloud account on my iPhone, however it says I must 'delete the account' before doing so? Does this mean that I delete the entire existing account, or just delete it from my phone specifically?

    From the iPhone only.

  • How to make a report to display next 18 months of data with when user select a particular month from the filter in power pivot tabular model.

    Hi,
    i have a  dimension table  with month_key having values (201201,201202,201203.......202011,202012) and month name ( Jan 12, feb 12,......NOV 20, Dec 20)  and a fact  table with columns (month_key ,measure_types, Amount)
    My requirement is to create a power pivot report  in which when a user select a month from the filter, the report should display the (selected month+18 ) month's data against each type . when JAN 12 is selected ,the jan 2012 +18 = june 2013
    , month name should be populated with months till june 2013 only .
    i tried creating calculated column"END DATE " in the fact table with  dax expression to calculate the 18th monh from the current month  as below 
    month_key END DATE
    201201       201306    
    201202       201307      
    and thought of filtering the table with month key <= ENDDATE but it is not working as expected. could you please guide me on this ? Is there any time intelligence function that serve the purpose . Iam using  excel 2010
    ..hence could not do any calculation on the report side also. please suggest .
    Thanks in advance                                                                                                                                               

    Do you need to show the measure calculated for those 18 months as a total on 1 row, or do you need to select a single month and then display on row filters 18 distinct rows?
    The first is trivial as driezl has suggested.
    The second will require a second calendar table.
    I created this example workbook for a coworker who had a similar problem. You will have to use the disconnected table as your filter and pull your related table onto the rows.
    Finally, the easiest way to deal with the sort of date arithmetic you need to do is to restructure your date table to have a series of "Sequential" fields. These fields should be the number of units of time since the beginning of your calendar.
    For example, consider a calendar starting on January 1, 2010. For January - December 2010, [MonthSequential] = 1, 2, ..., 12. For January - December 2011, [MonthSequential] = 13, 14, ..., 24, and so on, incrementing by 1 for each sequential month in time.
    Assuming you have this set up in your date tables (one related to your model - DimDate - and one disconnected - DisconDimDate) your measure would look like this:
    18 Month Measure:=
    CALCULATE( [Measure]
    , FILTER( DimDate
    , DimDate[MonthSequential] >= MAX( DisconDimDate[MonthSequential] )
    && DimDate[MonthSequential] <= MAX( DisconDimDate[MonthSequential] ) + 18
    Please review this example along with the workbook I have linked above.

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • The display on my MacBook Pro from 2007 finally gave out, how do I transfer all the data from the old one onto my new one?

    A week or so ago, the screen on the Macbook Pro I've had for 5 years went permanently black. The screen itself still works, but it's just all black. Went from flickering/flashing to black. I didn't have any kind of warranty on it or anything, and in addition to all of the other things about it that needed fixing, it seemed like it'd just be cheaper to get a new Macbook Pro.
    My question is: How do I get all the stuff from the old laptop to the new laptop without having to use the old laptop's display? Is there a cable I can use to connect the two, and I can just access the old one from the new one?

    FireWire between the two (get appropriate 800-800 or 400-800), Target Disk Mode on the old one, appears as an external disk on the new one. Drag everything over, or use Setup Assistant if first start of new one, or plain old Migration Assistant. You really don't need a display to see a prancing FireWire icon, do you?
    http://support.apple.com/kb/HT1661
    http://support.apple.com/kb/HT4889
    (with the added advantage that since you ain't booting anything off the drive, can turn the Mac on or off at will without risking data corruption on the drive)

  • HT204150 How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact?  Or at least change it for the autofill information?

    How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact?  Or at least change it for the autofill information?
    Perfernece for contact to change.  Do I just have to dis-associate my contact fromt the facebook account?  Is only the autofill changable?

    If you allow Facebook to access your contacts and you have the @facebook.com email alias turned on, it will add the @facebook.com email to your contact info, and because it has the fixed label of "email" it overrides every other email address.
    They didn't fix this in iOS 8.
    There are two ways to remove the @facebook.com email from your contact info:
    If you don't need your Facebook friends and their info updating your contacts, go into iOS Settings -> Facebook and turn off access to Contacts.
    If you don't use your @facebook.com email address (all it does it forward to the primary email address) you can go into the Facebook app, More -> Settings -> General -> Email -> and uncheck "Use your Facebook email". Removing it from Account Emails does not work, you have to turn it off. Once you do this, go to iOS Settings -> Facebook and turn Contacts off and on again to make it update your info. The @facebook.com address should be removed.

  • When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?

    Question
    When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?

    Is FF downloading the file as a .txt file? If so, go to "Folder Options" in the windows control panel. Click on the "File Types" tab. Scroll down until you reach the TXT file extension. Look to see what that extension opens with (lower part of panel). It probably shows notepad. Click on the <Change> button. Scroll down until you find "Microsoft Word." Select it and click the <OK> button. That should show the TXT extension is now associated with Microsoft Word. Click the <Close> button at the bottom of the panel.
    If FF is downloading the file as any other type, use the same process as above except look for the corresponding extension instead. If the extension is not listed click on the <New> button and create an association using the extension in the file name and then associate it with MS Word.
    davewdan

  • How do I change my apple id from an old one that does not exist anymore to the new one I use....Please help me I can't update any downloads for my apps.

    How do I change my apple ID from an old one that doesnot exist anymore to a new old? When I purchased my macbook I had a mac.com email address but now have a me.com one. My computer is linked to the mac one. I cant update my apps....some one please help.

    Well when I first purchased I had an mac address, which I have not used for a long time I started a me address about 18months ago. and up untill I updated my iPhone I have been able to use my mac.com now I cant and dont know what to do because it tells me to verify my apple ID. I put in the password etc and doesnot take me anywhere as I cant access the emails.

  • If I move a picture from one project to another in aperture why doesn't the jpeg change folders if all my pictures are referenced?

    I started importing all my pictures into Aperture and have been debating whether to use a managed or referenced library.  I'm leaning toward referenced, but before import everything that way, I do a couple of "test drives".
    In Aperture, I moved a photo from one project to another expecting that the jpeg in finder would move from the original folder to the new one, but it didn't.  Anyone know why?  Is there a way to make this happen?  Is it bad that I want this to happen?  Should I just use a managed library.  I like having control of the actual files (thus wanting to go with a referenced library).
    Any thoughts?
    Mark

    In Aperture, I moved a photo from one project to another expecting that the jpeg in finder would move from the original folder to the new one, but it didn't. 
    Mark, Aperture does not store the originals organized by project, but by the date of the Import Session. So moving an image to a different project will not change, were the original file is stored.
    This has a big advantage for backing up the originals. If they never move or change, you do not have to backup the originals other than directly after importing, if your library is referenced. And even incremental backups of a managed library are quicker.
    Is there a way to make this happen?
    You can always use the command "File > Relocate" to move the original files anywhere you want.
    Is it bad that I want this to happen?  Should I just use a managed library.  I like having control of the actual files (thus wanting to go with a referenced library).
    If it is bad, will depend on why you want to have control of your originals. If you just want to know where they are, it is o.k., or if you don't have enough space on the drive with the library and need to split the library across several drives. But it would be bad to move, edit, or access the referenced originals in any way. Let Aperture do the handling,  or you will be risking broken references.
    Aperture has several buil-in ways to show you the original: The "M" key will switch the Browser to the original, "File > Export > Original" will give you an exact copy of the original, or you can relocate the file to another folder.  I simply open the aperture Library in iPhoto, when I want to view my managed originals. iPhoto has a command "File > Reveal in Finder > Original" that will show you also the managed originals in the "Masters" folder inside the Aperture/iPhoto Library package.
    You may want to have a look at Terence Devlin's User Tip:                  How do I access my Photos in Aperture?
    Regards
    Léonie

Maybe you are looking for