I changed the parameter -alias author when i want to Configure signing for tablet applications

hello,
i thought i should replace -alias author by -alias myname in the blackberry-keytool command, so i'm registered with this wrong command and now i can't sign my apps and even i can't do the correct registration again cause it displays "client already registred", how can i fix this
thanx

Hi haresbadr,
Two things:
1 - You'll get a better response in the developer forum at http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/bd-p/tablet
2 - You might need to delete the signing key data store on your computer. Which OS are you running?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!

Similar Messages

I set my passcode in arabic then I changed the language to English, when I wanted to open my ipad later there was no arabic letters to enter my arabic passcode..and I am not able to use my Ipad again please let me know what to do

I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do

Hello Shaholeh87,
Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
http://www.apple.com/itunes/download/
Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
Open iTunes Application on your computer and then start the process step by step
1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
(If the low battery screen appears, charge your device for a few minutes and try the process again.)
4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
Hope this process will help you

How to change parameter on Linux when i want to install NW7 for oracle

Hi everybody
I have get the guide of install NW7, that below list of documents are required:
Master Guide
Installation Guide
OSD
I have question of what is OSD? OS meaning is Operation System, I want to get what D naming with?
and how to get OSD docment form service.sap.com or sdn@sap
Could any one to ask the questions? thanks!

> Otherwise, Could you kindly to provide how to get the information with configuation information in each operation system,
>
> I want to try to install the NetWeaver in SUSE10. But i cant find the config info with OS.
The operating system dependent configuration are in the installation guides for the application and in the corresponding installation notes.
e.g . notes
171356 - SAP software on Linux: Essential information
1275776 - Linux: Preparing SLES for SAP environments
and more.
Markus

Can you please tell me how can i change the parameter of Applet using Aspec

Respect Members
Can we apply Aspectwerkz on Applet? In our project we have to
change the method parameters before its execution(Around Advice) , can we do this in applet using Aspectwerkz?
Can you please tell me how can i change the parameter of Applet using Aspectwerkz or AspectJ ?
I did it by for Java Application using the AspectJ And Aspectwerkz But not able to do for Applet.
For Applet I Am setting the parameter in JAVA plug in for Aspectwerkz e.g. -Xdebug -Xrunaspectwerkz -Xbootclasspath & path for xml file in which pointcut is defined.
If you any Friend working on it or any author who might be helpfull for me please Forward this mail to him/her
THANKs in Advance
[email protected]

hello rodale, what you're seeing is probably a side effect of firefox not being able to save certain preferences into its profile folder.
go to ''firefox > help > troubleshooting information'', click on ''profile folder/show folder'' and close all firefox windows afterwards. a windows explorer window should open up - in there delete the file named '''user.js'''.
in case this didn't solve the issue yet please also refer to [[How to fix preferences that won't save]].

It takes long time to load the parameter's value when running we run report

Hi,
It takes long time to load the parameter's value when running we run report. What could cause this? How to troubleshoot the behavior of the report? Could I use Profile and what events should i select?
Thanks

Hi jori5,
Based on my understanding, after changing the parameter, the report render very slow, right?
In Reporting Service, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. To analyze which section take much time, we can check the table Executionlog3 in the ReportServer database. For more information, please
refer to this article:
More tips to improve performance of SSRS reports.
In your scenario, since you mention the query spends less time, the delay might happens during report processing and report rendering section. So you should check Executionlog3 to check which section costs most of time, then you can refer to this article
to optimize your report:
Troubleshooting Reports: Report Performance.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

How to change the Existing alias with new alias name...MAXL SCRIPT

HI Experts
I need to change alias name of the existing member with new alias name.
please send me maxl code to change the alias name .
My thought is
1) Old alias should be replaced with new alias name .
2)There is one account that should be rolled out to another parent..these parents are already exsist
3) I need a MAXL Script to change the new alias name .
please suggest ASAP.
Thanks
USER

John
I heard that we can replace existing alias name with new alias thru MAXL
i.e replace alias name XXXX member with YYYY ;
please correct me if iam wrong ,might be Maxl command is wrong but this is the idea.
Thanks
USER

How to change the default delivery day when i create a shopping cart?

hi,dear
i got some trouble when i was creating a shopping cart.
i want to change the default delivery day when i reference an old template.
pls see the pictures and take the details.
it seems that this forum dont support the [img][/img],so pls clike the link to open the picture.
if you cant see the picture ,pls tell me,thank you
step1:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119338649_0.jpg
step2:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119432170_0.jpg
step3:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119557507_0.jpg
step4:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111120079773_0.jpg
Edited by: ming yu on Sep 11, 2009 5:22 AM

Hello Ming,
Have a look at following thread concerning BAdI BBP_CHANGE_DEFAULT:
[Change the delivery date (Required on) of SC|Change the delivery date (Required on) of SC;
You will have to check in which SC transaction you are in order to distinguish creation from reference to old template.
Regards.
Laurent.

When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

Tools > Options > Tabs - is the last preference there check-marked??

How do you change the I'd on the log in screen when you want to update your apps and the I'd is wrong

How do you change the I'd on the log in screen when you want to update your apps and the I'd is wrong and the password is also wrong. HELP

Go to Settings>Store>Apple ID. Tap on the ID and sign out. Then tap on "sign in" and sign in with the correct account.

Error Message: "The parameter is incorrect" when trying to modify SSLs

Like I wrote in my subject line, RoboHelp pop-ups the error message “The Parameter is incorrect” when I try to modify any SSL.
What happens next, is that the “Print Document General” window opens, but does not allow me to select anything (the fields are blank).
If I close the window and open it again, it seems to work until I have to select the styles from our Microsoft Word Template.
Then the error message “The parameter is incorrect” appears again, and RoboHelp does not allow me to select anything but a stylesheet
(which is not what I need).
This is very strange, because not only until recently I was able to build Word documents and PDFs, but also my colleagues are able to
produce them out of my source.
Even the old projects, that I was able to build, now I cannot.
I do not have any problem in generating CHMs.
Until now I have tried everything I found in the forum:
I deleted the PSS file (also following the advice in your snippet number 14 from 10 – RoboHelp HTML –Features and Use).
http://forums.adobe.com/thread/120022
I reinstalled RoboHelp and the Adobe Technical Communication Suite (I also used CCleaner to delete the registries).
http://forums.adobe.com/thread/598335
I gave Administrator rights to all users in my computer (what seemed to work for some SSLs, but not for all)
http://forums.adobe.com/thread/870339
I am also looking at all programs that I installed since the last time I was able to build .docs in case there is a conflict, but I do not find anything!
My computer has Windows 7 installed and I use the Adobe Technical Communication Suite 3.5, with RoboHelp 9.
My Microsoft Office is 2010.
Can somebody please help me? Did someone have the same problem?
Thanks in advance.

Hi there
I know you said you reinstalled, but did you reinstall before or after you gave administrator rights to all users on your computer? And how many users *ARE* on your computer?
Often you need administrator rights to properly install things.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How do I change the default "date range" when searching in the forums?

Hi all,
New to the SAP forums... How do I change the default date range when searching in the forums? I am getting a 90 day search by default. Then I have to change it and search again. Argh!
Thanks,
--Amy Smith

Hi Amy,
the default date range cannot be changed by users. It is defined system-wide.
Regards,
Michael

System not changing the G/L account when material group is changed in Pr

Hi Experts,
Issue- System not changing the G/L account when material group is changed in Purchase requistion.
Process followed:
1. Create Service Pr with material group 5040 which is assigned to valuation class 3511 and 3511 is assigned to g/l account 51370000
2. Changed Service PR material group from 5040 to 5050. 5050 is assigned to valuation class 3512 and 3512 is assigned to G/L account 51260000
The issue is when we changed the material group from 5040 to 5050 system is not picking the g/l account which is assigned to 5050 i.e. 51260000
instead the g/l remains remains as before which is there for 5040 i.e. 51370000
Please let me know how can we resolve this problem and pick the correct g/l. Please find the attachments
Regards
Badri

Hello Badari,
if you are using the item category D "Services", explanation from note 663983 - ME22(N), ME52(N): No new G/L account from material group applies:
Please consider the following:
You can maintain the material group both at item level and at service line level. If you subsequently change the material group at item level, the material groups remain unchanged in the services. As a result, the G/L account is not redetermined at service line level.
In order for the G/L account to be redetermined, you must explicitly change the material group in the service line.
Kind Regards
TomT

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an a

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an active link by any other one icon I select.

Current Firefox versions have a feature called tear-off tabs.<br />
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.<br />
You can drag that tab back to the tab bar in the original window to undo that detaching.
bug489729 (Disable detach and tear off tab):
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

Change the Parameter as Select option

Hi Guy's,
Please help me friends, present requirement is like this : change the Parameter into Select-Option.
Here they are using one function module, this function module import parameter taking single value, how loop this function module with in this select-option.
PARAMETERS p_fictr LIKE fmfctr-fictr.
START-OF-SELECTION.
Move the select options to internal tables (import parameter for fn)
move_sel_option : sel_buk   s_bukrs ,
                     sel_pern s_pernr ,
                     sreinr    s_reinr ,
                     spdatv    s_pdatv ,
                     sberei    s_berei .
Call the function to get all trips corresponding to sel criteria
CALL FUNCTION 'ZHR_GET_FUND_TRIPS'
    EXPORTING
      p_fictr = p_fictr
      p_sub   = p_sub
    TABLES
      s_bukrs = s_bukrs
      s_pernr = s_pernr
      s_reinr = s_reinr
      s_pdatv = s_pdatv
      s_berei = s_berei
      i_trip = i_trip
    EXCEPTIONS
      OTHERS = 1.
Thanks and Regards,
Sai

hi,
You can first the field values using the select statement and then loop that internal table and pass the values to the function module.
try this
*PARAMETERS p_fictr LIKE fmfctr-fictr.
select-options: s_fictr for fmfctr-fictr.
START-OF-SELECTION.
Move the select options to internal tables (import parameter for fn)
move_sel_option : sel_buk s_bukrs ,
sel_pern s_pernr ,
sreinr s_reinr ,
spdatv s_pdatv ,
sberei s_berei .
select fictr
   from fmfctr
   into tabel itab
where fictr in s_fictr.
loop at itab.
Call the function to get all trips corresponding to sel criteria
CALL FUNCTION 'ZHR_GET_FUND_TRIPS'
EXPORTING
*p_fictr = p_fictr
p_fictr = itab-fictr
p_sub = p_sub
TABLES
s_bukrs = s_bukrs
s_pernr = s_pernr
s_reinr = s_reinr
s_pdatv = s_pdatv
s_berei = s_berei
i_trip = i_trip
EXCEPTIONS
OTHERS = 1.
endloop.
regards,
Veeresh

Changing the default target folder when bookmark menu pops up

hello. im using a 2011 macbook pro with snow leopard. what i would like to do is change the setting so that when i add a bookmark, the default setting would be "bookmarks menu" instead of "unsorted bookmarks". can this be done? thanks

Try:
*Add Bookmark Here 2: https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/

I changed the parameter -alias author when i want to Configure signing for tablet applications

Similar Messages

Maybe you are looking for