I changed windows 7 ultimate changed to windows home premium
Ok, I want to thank the two people who tried to help me last time. I found out I had to install a new windows. So I went and found my friend could do it but me having windows ultimate he only hand windows 7 home premium... And well now that it works I have
a new problem... Along with the ultimate status gotten rid of, I now don't have the windows office. So like word, PowerPoint and excell.
My question is is there away for me to get it back without a fee or will I just have to go and buy the office pack stuff to replace it?
To begin with, you need to purchase Windows 7 Home Premium and Microsoft Office, then install them. Microsoft doesn't allow free installation of Windows/Office. If your PC was shipped with Windows, contact the manufacturer and request for a Windows installation
disk. They may charge based on the warranty status and the company policy.
Balaji Kundalam
Similar Messages
-
64-bit Windows Vista Home Premium compatibilty?
I'm looking to purchase a new PC that runs the 64-bit Windows Vista Home Premium. I'm wondering if my older programs, Premiere Pro 1.5, Photoshop 7, and Dreamweaver MX 2004 will run in the new system. Any advice would be greatly appreciated.
Gee, Phyllis I've read on microsofts own site that CS3 was 64 bit vista compatable and CS4 was native. I'm still on Photoshop 7 so I can't help you but on photoshop re-installs that load with messages about missing files , I search in my back up folders for the previous computer where it ran fine and copy it into my photoshop program folder.
If you google the exact missing file message you may find a site that charges for it. I'd be scared to do that, though.
Bob, if I grasp it correctly 64 bit compatible means "EUREAKA" the software runs on 64 bit vista in at least one case so we'll call it vista compatible. Vista 64 bit native means software will use bigger chunks of data and access more RAM available because it's been re-writen / coded and designed for it.
I had my old dell inspiron 8100 laptop start to BSD occasionally. I do a lot of photoshop and picture storage and have 2 big HP dual xeon 800 FSB workstations with XP Pro and 4GB of RAM (3.5 showing) for sit in one spot work. I broke down and bought a new laptop last september to replace the dell.
Got a gamers laptop and changed the OS to Ultimate 64 bit from Home Premium 64 bit and changed a single weirdly partitioned 200 GB 7200 RPM SATA drive to dual 320 GB 7200 RPM SATA HD's.Had to buy Partition Manager from Paragon to partition drives like I wanted (OS and programs on separate spindle from paging file and scratch disk)and it had to boot in a DOS mode to do partitioning succesfully and worked fine on Vista 64 bit. Norton Anti - virus works and was listed as 64 bit compatible when I bought it. Acronis True Image 11 home clearly states "Supports 64 bit CPU and windows Vista" so I guess they do or they don't................Got refunds from lavasoft and spyware blaster they both claimed Vista 32 and 64 bit but were quick to give refunds. Would not load or install.
As you can see I'm trying to adapt to vista and 64 bit so I'm used to it when I get new Vista workstations with more RAM for Photoshop. I've e-mailed Roxio support and have been issued a ticket # for my original problem. Let's see what they say..............Raymond -
Windows 7 to replace Vista Home Permium
New HP Touchsmart--second generation. Have completed recovery disk creation. Want to replace Vista with Windows 7. Can I use recovery disks to restore HP and other program files? Install of Windows 7 to replace Vista Home Premium will wipe disk as I understand. Tried to backup files and failed. How many disks will it take. Because it is new, there are no files other than what came on the computer.
Backup files means back up your data files (just in case something unexpected happens).
If you do an upgrade to Windows 7, your applications and data will still be there. There will be some applications that will not work. You will need to go to www.hp.com/support to download the application/driver updates for your system model. -
NWDS and windows 7 Home Premium 64 bits
Hello
I try to install NWDS 7.1 on a laptop with JDK 1.5.0_15, OS Windows 7 64 bits. (Home Premium)
Installation is ok, adding the features also, connect SAP site to upgrade to the latest version is fine.
But I m not able to create a project : Wizard list is empty and only button cancel is enable !
It' s a bit frustating as a CE and ABAP stack are correctly installed and running on this laptop !
Any idea to solve this issue
ThanksHi
Additional information , the error is due to the NWDS UI :
the log error meesage star with
org.eclipse.swt.SWTERROR: No more handles
at org.eclipse.swt.error(SWT.java:3589)
result for example is an empty view when I want to display the Context Tab for a component controler.
Thanks -
Disconnecting WEB SSL VPN client windows 7 to remote windows 7 virtual machine
Good morning,
my problem, common to other colleagues who use Windows machines 7 Professional is this:
I connect to WEB SSL VPN Cisco from Client Windows 7 Home Premium Explorer-9 to a virtual machine Windows 7 Professional using a specific professional audience and vpn user. I access the Terminal Services window (attached JPG) with a list of links to virtual machines.I connect to the virtual machine in Remote Desktop Full Screen mode and log in with the same user and password. For the connection is installed an add-type control ActiveX CISCO Portforwarder Control version 3.1.0.1, file name -> cscopf.ocx.
Problem: The session window once inside the virtual machine disappears and disconnect from the virtual machine back in the window of choice of Terminal services available. This always happens and there is no way to maintain a stable connection.With modality not FULL SCREEN, the session window would seem to remain stable but however is impossible to work in a small window.
This problem is raised after the update windows 7 to SP1 both Home premium and Professional. In fact before the update the connection is stable. The update to SP1 update the RDP client microsoft to version 6.1.7601.17154 from version 6.1.7600 but i do not know if this the cause of the problem.
Have you an update of CISCO active-x to fix the problem? I cancelled the file and download the last version but the problem remains.
Workaround: Use local virtual machine with xp or windos 2003 and access form this operating system but I consider absurd to use a local
virtual machine to access a service which should be directed
Note: This problem does not occur if the VPN session to the virtual machine Windows 7 is launched from a host machine running Vista Home Premium with RDP Client 6.0. My previous PC had this OS and I was working in an absolutely stable by performing the same type of connection.
Host Operating System: OS Name Microsoft Windows 7 Home Premium Version 6.1.7601 Service Pack 1 Build 7601
OS virtual machine accessed via ssl web vpn: OS Name Microsoft Windows 7 Professional Version 6.1.7601 Service Pack 1 Build 7601
Can you help?Thank you.
Carmelo Orlando
NoThe same problem here as well.
I am using a Win7 PC to connect to an Win Vista PC via SSLVPN. Once i logged into the remote PC, the session is disconnected.
Do we have any corrections from Cisco for the moment? -
Ideapad Y560P Windows 7 Home premium Language change
Hello,
I'm living in Korea for 5 years but I'm foreign citizen. After long "research" I've just bought an Ideapad Y560p here in Korea. During the research process I was focused more on the hardware specs because since the notebook was intended for home usage I was not interested in upper Windows 7 versions. I must mentioned that I've start working with computers long time ago prodramming on DOS PC, then administration for a CAD integrated system in a company starting with Windows 3.1 for workgroups until Windows 200 server with Windows XP clients. Vista was skiped due to obvios reasons. Anyhow I had no idea that at this stage of technology development and market situation a company could release an OS that could not be customized in regards with the Language Interface.
After I've excluded Apple MacBook (I have also IMac but the price I thought is a little bit too high) I've bought the IdeaPad Y 560p with Windows 7 Home Premium. The OS is preinstalled in Korean language (I was expected that) but I thought that will be no problem to change. After my laptop arrived I was struggling some time to change the korean language of the interface but no success. After some time I was searching on INTERNET and I could not believe: to be able to change the language you must buy Enterprise or Ultimate version. Sorry for MS but this is really STUPID. Even on Win 3.1 with the kit on 10 1.44" disks you have some limited options to change it.
I've called to Lenovo Korea to find a solution but result = 0. They say that is not possible to change even if on some sites I've read that the OEM have the extended language packs that could be used for this change even on the WIN 7 MONOLANGUAGE versions.
I've called Microsoft korea trying to find a solution to change from Korean to English. Result 0. Anyhaw they were "very nice" to offer me an upgrade at the market price.
Sorry for the this long message but I'm really frustraded and I'm also thinking that Ireally made a bad mistake not going for the MacBook pro.
Does anybody (maybe from Lenovo) have a solution?
In the mean time I'm trying to see if I could return the notebook and to get a refund or to find a miraculous solution on Internet.
I forgot to mention that no instalation DVD come with the notebook to try atleast a clean installation hoping that at the begining I could choose a different language than korean.i was gonna suggest to install language packs, so, nevermind, next step:
no installation dvd required for lenovos, shutdown your computer and press one key recover button ( small one near power button ) and follow the instructions for performing clean windows installation. after that the operation system may ask you choose the language, otherwise, call lenovo support line for resetting your harddisk to default ( in english )
post back if you have negative feedback about your issue ( pls, with pm ) then i'll contact admin and lets see if he can do anything about it. -
Can I change the OS of Touchsmart 610 from Windows Home Premium to Windows 7 Pro?
I have 610 1100me system loaded with Windows Home Premium 64 bit. We bought it from Dubai and is in use in Pakistan. It started giving problems after few weeks of use. Its' hard disk makes noise and sometimes, system could not find boot disk. Most of the times blue screen of death and hanging issues. Any idea about this issue and how to fix it? My observation is that the culprit is hard disk!
Also, can I change its OS to Windows 7 Pro or ultimate (32 or 64 bit)? Where can I find all drivers for Pro or Ultimate?
Many thanks for your valueable advice.
Regards,
KK
This question was solved.
View Solution.Hi,
Nearly nothing change interms of drivers required for Windows 7 (HP, Pro, Ultimate) unless you switch from 64 to 32 bit. You can reuse your current HP 64 bit drivers for 64 bit W7 Pro or Ultimate.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How do you change the language of the dictionary on Safari from English (US) to (UK)? I'm using Windows 7 Home Premium and the latest version of Safari for Windows that I know of. Cheers in advance
92matt wrote:
Cheers for the quick response, but do you know whow I would do that?
Apologies I'm not the most technical of people!
Open Regional and Language Options by clicking the Start button , clicking Control Panel, clicking Clock, Language, and Region, and then clicking Regional and Language Options.
Lupunus -
Today the website addressed in my browser window changed so that the site's home addresses are in black and the rest of the address are in grey. How do I change it back?
Just go to iCloud on your iPad. Click on delete account - this will delete the account on your iPad only. You will be given to keep the addresses and calendar or delete the data.
Then you create your new account on you iPad by entering your apple id. -
Cannot change active network from public to home in Windows 7
Hello, I have just installed Windows 7 RC 7100. I have a netgear fa311 network card, which it did not automatically install. I manually installed the drivbers and now it has identified my home network as a "Public network" so I can not connect to the internet. I can't seem to find any way to change this to the "Home network". Can anyone help please?
Hello, Tried that! The"Public network" text is not a link!! Not here on this pc anyway! The ip address I have is 169.254.172.117 with a subnet mask of 255.255.0.0
May 25 2012 23:03 win7Ultimate update from HomeP LicenseID_5_ sys pack1
May 26 2012 10:18 ~ 10:28 win7U5 sp1
May 26 2012 11:21 ~ 11:29 win7U5 sp1
May 28 2012 04:10 ~ 04:43 Win7U5 sp1
July 3rd 2012 08:13 ~ 08:36 win7U3 sp1
July 05th 2012 16:24 ~ 16:33 win7U3 sp1
July 06th 2012 12:43 ~ 12:53win7u3sp1
July 07th 2012 13:29 ~ 14:00 win7u3 sp1
July 22 2012 ~ 09:04 win 7 p h sp1
Aug. 06 2012 10:33~10:48 win7h sp1
Aug. 25 2012 08:12~ 08:53 win7U_6 sp1
Hello Mr. Darene Lewis and Ellerdch,
Remember you have emailed the *.etl file to Darene Lewis . May I know how you did that from here , the technet.microsoft forum please? I have been asked same IPV4 Question from him. However, there is not found attach way from this perusal.
They are either image , HTML or appliance software model.
No option for *.etl sending .
--------> *.elt could be built in Hyperlink first then attach_link to you [July 07 2012 13:30]
TO modify the Networks , some next places maybe need pay attentions first ...
0) Connection via WLAN or LAN; Router or Modern or else
'0.1) "MULTIPLE NETWORKS" means too many things ... router, interface, communication category as well their configurations so on ...
it is not simple "unidentified Network " change to Home or workstation network ? !
1) Network Share Center \ chose home and network option
2) Anti_Virus FireWall's Inbound:Outbound settings
3) Microsoft Computer \ services settings
4) Dos Administrator \ netsh ? settings
4.1) Powershell \ settings << Dos cmd , why?
4.2) netsh ras > except PPPoE 1 that is my registered wanport, there are as many as 8 more connection available like pptp, etc... they are indeed
running ? Although in Router configuration , PPTP already has been set to "deny" ?
5) Search \ secpol.msc settings
6->) Why the default network ISP giving connection retained reserving at MULTIPLE
NETWORK which is under the search now.
May 26 2012 10:48 win7U sp1
May 26 2012 11:09~11:14 win 7 U sp1
Multi_monitor performance on Win 8 only , if my PC has been taken Authority to do so, then
the System Security has been ruded.
PASSWORD attentions included : ANTI_virus Tool, Microsoft Fire Wall, HDD password,
Windows logon Password, Usual Appliances Password Protection such as Lenovo's CSS etc...
Ref: cc722518.aspx_file by Microsoft
This article described how a server configure its up to five IPs from the NT Server.
My PC client has been merged by NT as its Client . Since my PC now connecting internet
THROUGH Multiple Network.
It is either using my ISP authority on Win 8 for multi_monitor or playing NT server . It just
treat me as one of its clients.
How can I fix this , try hard Julie by yourself?
"Advance IP Address nowhere to find [as it is for Server parameter], this is for NT server to
configure the IP intranet more than one address to access different servers at routine situations.
Ref:cc451515(v=WS.10).aspx_files Microsoft
Multiple network adapters 2 out of 2 rated this helpful Updated: January 21, 2005
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1,
Windows Server 2003 with SP2
quato "The cluster adapter handles client-to-cluster traffic using the virtual IP address. However
host-to- host traffic within the same cluster is not
possible on this adapter because the MAC address for each host in a particular cluster is the
same. For more information, see Address Resolution
Protocol (ARP)."
FIFS is the basic law here in the INTERNET world.
Since the IPV6 has not be able to work to identify each of us except Client join to Domain own
personal IP from NIC.
Some Domain like Best domain, FatCow simple issue C Luster called it to us.
That is why My client PCs has been unnoticed connected as Multiple Network by Servers.
----> very likely Modern ISP output has been occupied by Wireless redirect who roler as Server ,
maybe using win 8 or NT . Many prompted cmd not be able to configuration on my Win 7 U.
netsh advfirewall> check found 7 NL there.
7) The Authority abuse accident under monitoring by Anti_Virus and Microsoft, Lenovo,
Router_syslink Companies REF_15) 16)
8) Power shell another place to care the setting
9) Route Setting for advance appliance on Intrude Protection approaches etc...
11) AAA [Authentication, Authority, Account] management, correlated with Multiple Network
somehow,Reference for 6) 15) 16)
Authentication has had problem to protect Password for a quite while. Which is probably merged
with MIL appliance that noticed.
------> CSS reset can solve this.
------>E-certification with Microsoft function connection setting solve this ..
With Password manager of Lenovo , it will lose features of Certification migration as well, the
Phrase advance Security Protection THAN "Client Security Solution" by Lenovo
Therefore, CSS (instead Password Manager) can be intruded at that time probably by " some "
12) The beneath Error contacting ISP still stay with Modern VSDL :( REF_ 15) 16)
13) Having been questioned whether am I installing switch or NT server on the router ...
Three are be some symptom indicated that but unable to be ? Agency said just ask briefly after
repeated .
13-0) [802.1x allow wire and AP wireless access point to flow through PC although
Authenticator both]
13_1)MY XP motherboard [UUID:80BC1E5333640010AEC1C8D08A1DEE15/M:8425LB9/SN:]
has been lost nearly two years which can play as NT server. Switch is nothing device
for me . ANY detective on it by organization or personal would be rewarded.
14) ACS [Authentication Control Server] control Modern ISP output signal definitively , the Contract
description on web server Plan is one of main reasons? THE ISP insist not to change it right while
trail_case follower Mr. resigned this week.
15) ISP suppliant Speed critical factor upon whose get Authentication first then , the ICMP action ?
15-1) Why my ISP plan 30M , shown connection speed but100M
15-2) In fact, the ISP has not rendered me right Order Product appropriated with the PLAN for
over one year from very beginning. That is one of why ACS can't detect me well. On side of both contract and exclusively
offering VDSL modern
15-3) e-certification secure the connection however, clear text transaction hole also.
16) With Cisco Router, it seemingly connected Internet as the Model unable find input is
Wire/Wireless signal. Having to proclaim is my PLAN is
Wire_30M_5G ordered at Mar.2011
16-0) There is fe:: ipv6 address likely address through the [adapter teredo pseudo interface] by ipconfig , obviously told me wireless through ?
16-1) By only ISP Modern , there is indeed NO Internet that is why the Screenshot down.
Then why at this condition, browser internet looks OK? Because the Wireless [multiple
Local connection] Ref_15 took the Authentication_Account first, secondly, Created
call AD_HOC wireless function to make the all networking devices on net that is
INTRANET.
16-2) @OFCA.gov.hk, local communication Management , is negotiating with ISP locally for one week since June 27 2012 received
the report. Only contract it working on , last contact at Aug. 2nd 2012 retaining along with ISP company today Aug. 25 2012
17) Have you thought of PC purchase area and location bringing you something differences ?
17.1 the order win7 home premium changed into workstation when it arrived home. :(
well, have to pay attentions that the WORKSTATION has two interface available on the NetworkCard that one to Internet and another to
OS. How it can be set to , route to then, it will all depend on the capability inter_against_act among the Hardware, Software and Firewall
etc. so on .
18) ISP adequately protracting your account, example, all register info correct, firewall right configuration time by time?
19) Microsoft alert anything when you re_active own PC license ?
20)
All you pointing out Services and Applications on the Media related no found . Might be hidden?
The problem "Multiple Network" is an Intrusion NetworkCard imposing
illegally using my account. A 30M_WIRE_24m+1m e-agreement.
Then, the imposter built a wireless network before I could connect to the ISP server.
This made me only can get a Wireless address shown by the IPV6 FE80::
which implying a wireless service working on.
DNS auto jump to >172.x.x.x private 218.x.x.x while disabled the directly connection to ISP DHCP server.
Suffix @netvigator.com appending configuration not available. Obviously my PC has been routed to one Private
Route/Switch device, the Unknown shown in Mapping Network for over four months.
NOW THE UNKNOWN DEVICE DO ANYTHING WHAT THEY WANT WHENEVER SECOND.
ISP has no effective and efficiency reaction for it . Since when the e-Contract started , it has plotted to fool the client by
created two unclear e-contracts, Effective Date jump to Before the Modern Agency arrive to my home, on the just agreeable website.
Local @ofca.gov.hk of communication department retain along with ISP company 2 months.
WHO , WHERE BEST FOR A CLIENT TO GET HELP FOR THIS PLEASE?
21) others at later time...
Blue Oisou
Julie L. HUANG -
Satellite L675 - how to change to a different language (Windows 7)?
We recently bought a number of L675s with Windows 7 Home Premium. I've installed them all with language=German, but a couple of our staff have now come back and asked to have English instead. The machines came with four languages (English, German, French, Italian), but once installed, it doesn't seem to be possible to change the language. Not even using the recovery disk. What do I need to do to achieve this - buy the recovery disk media from Toshiba?
{quote:title=Paolo30 wrote:}
As far as I know its not possible to change the language after you have chosen the language while Setup procedure.
So either you will upgrade the Win 7 to Enterprise or Ultimate and will install an multiple language package (this is available for Win 7 Enterprise and Ultimate version only) or you would purchase the Toshiba recovery disk{quote}
Thanks, I was afraid of that - it looks like I would have to purchase a recovery disk per language ... what a rip off. Just because I need to change the language, I end up paying 25% of the price of another laptop. -
I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes, and Itunes can't find my Ipad. [email protected]
Ok, if reinstalling iTunes as suggested above does not resolve the issue of iTunes recognising the iPad then try this -
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are no faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/
As for making your new laptop your 'home computer' follow these instructions -
1. Without connecting your iPad to your computer -
A) Install iTunes / make sure the latest version of iTunes is installed.
B) Go to the Store tab and click on "Authorise This Computer".
C) Go to Edit, click on Preferences [iTunes and Preferences on Macs] and click on Devices. Put a check mark in the box next to "Prevent iPods/iPhones/iPads from syncing automatically". Click OK and close iTunes.
2. Connect your iPad to your computer -
A) Start iTunes (it will not start automatically because of the action at 1(C) above).
B) Right click on your iPad under Devices in the left column. Select "Transfer purchases".
C) When the transfer has completed, right click on your iPad again and select "Backup".
D) When the backup has completed, left click on your iPad, click on the Apps tab, and put a check mark in the box next to "Sync Apps", and then click on "Apply" (bottom right).
E) Unless you want to always do a manual sync (as I do), go back to Edit, Preferences [iTunes and Preferences on Macs] and uncheck the box next to "Prevent your iPod.....".
F) Finally, on your iPad, check that everything is syncing properly. If not, go back to iTunes and check all settings.
NB You should not lose any apps. However, any 'purchased' missing apps can be downloaded again FOC. As with updates, this must be done with the Apple ID under which they were originally 'purchased'.
Also see here as to moving your music to your new computer -
http://support.apple.com/kb/HT4527 -
I changed the password in my windows live e-mail account. My iphone now recieves but will no longer send e-mails. I have deleted the account from the iPhone - reinstalled it and verified the password is correct. I recieve a message that "Cannot Send Mail" "the user name or password ... is incorrect. Any advice ?
Hello DRB1962
Check to make sure that you validated the device within your account on webmail.
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/HT1694
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
How do I change the size of a windows partition on my MacBook?
How do I change the size of a windows partition on my MacBook?
CampTune $19 from Paragon-Software is your best bet.
http://www.paragon-software.com/mac/ -
How to change fonts in the Finder window
How does one change change fonts in the Finder Window?
I've done it before and I know it's different in the Side Bar and for the fonts in Column View or List View.
It doesn't seem to be in Finder Preferences.
I can't find in in System Preferences.
It's not in Font Book.
Where is it???
TIAIf you click the Action Gear you have the option to change font sizes. I am not sure if changing the font per se is possible without a system hack which I do not recommend.
Maybe you are looking for
-
Problem with onBlur=validate_int_range javascript function
Hi i have a java script function which is use to check for the range of the integer i enter. The function works fine but the problem is once i click ok on the validation boxes that come up when i enter a wrong value it allows me to click the submit b
-
Can ipad open, revise and send word docs?
Can Ipad open, revise and send word docs?
-
Hello, when I open the export dialog the field for the file name is not visible (it is, but only 2 px width) I have to pull the window some pixels wider, then the layout changes and it is fully visible. This only happens with my default local setting
-
Have lost the istore app - how do i get it back
how do i get lost i-phone store and update apps back on my iphone
-
Just wondering (again) . . . I have asked before about speed increases in Lion (re Pages) and this is a further variation . . . Some of our Pages documents are pretty long (big) and they can take a long time to open and print. I'm wondering if the ne