I chose double sided printing and it only printed half the pages. it didn t ask me to flip them

I chose doubke sided printing on my F2280 and it only printed half the pages for me. . . . . .I didn task me to flip them round and continue and it is quite a big document to print it over again
can you help please? : )
Thanks

Sometimes the wireless MagicMouse can be erratic and seem to automatically zoom in, etc. Try going to System Preferences and detuning the sensitivity settings, see if that helps.

Similar Messages

HP psc 950 all-in-one is printing half the page...cuts off the top portion of what I am printing.

HI! My HP psc 950 all-in-one is printing half the page....cuts off the top portion of what I am printing. Not sure what happened to the printer. Came home one day and the printing wasn't the same. Possibly the kids could have fiddled with it but no one is owning up to it. Any solution to get the printer printing normal again?
Thanks
-L

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Double sided printing on the 2605dn in Windows 8.1

I have a Color HP laserjet 2605 that has printed on both sides using windows XP. How can I get it to print on both sides in my new HP 8.1 computer? There is no where in the "prefereances" menu to do so.
Thanks

Hi,
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Double sided printing, adding blank page after two different groups

Post Author: adepper
CA Forum: General
I have created a report that is structured as such:
Group 1 - Based on formula, groups by type
Group 2 - Based on formula, groups by use
Group 3 - use (pulled directly from Database)
Group 4 - ID
I have the report printing an extra page after group 3. I used this formula in the Section Expert - New Page After
remainder(pagenumber,2)=0
I also use that formula to reset the page number
What I would like to do is print a second blank page if group 2 does not start on the top of the page, meaning I do not want either group 3 or group 2 to start on the back of a page, so that this report can be placed in a binder, with dividers.
I have group 3 giving me a blank page with no issues, it is just group 2.
Any help and/or suggestions would be appreciated. If I did not give enough details, I am sorry.
Thanks!

Post Author: adepper
CA Forum: General
After a lot of blood, sweat and tears, not to mention a lot of curse words directed at the computer, I was able to get this to work. Now I just have to do it for three groupings instead of two (deliver the impossible to your bosses, and they turn around and move the brass ring right out of reach again!)
In case anyone is interested in how I was able to manage this (I found many sites where people asked this question, but not one complete answer), this is what I did:
In the footer section:
Group 4 - ID (database field)
Group 3 - PrimeUse (database field)
    3a - Contains data
    3b - Contains data
    3c - New Page After, Keep Together, and Reset Page Number After are all checked. In the condition for Reset Page Number After I also have this formula:
    remainder(pagenumber,2)=0
    3d - New Page After, Keep Together, and Reset Page Number After are all checked. In the condition for New Page After I have this formula:
    remainder(pagenumber,2)=0
Group 2 - Suppressed
Group 1 - Grouped by Store Type -
    1a - Suppressed, New Page After and Keep Together are all checked.
    1b - New Page After and Keep Together are checked. In the condition for New Page After I have to following formula:
    remainder(totalpagecount,2)=1
If anyone sees any errors, or if you think you can get it so that I get another page blank, after Group 1, if the Group starts on an even numbered page, I would appreciate the help.
Thanks!

What do i do if a song did not fully download and it only plays half the song the song

i bought a song on itunes the other day and i realized that only the beginning half of the song will play and then it will stop for the other half and no sound will be coming out but it will still be playiny. how do i get a refund or how can i redownload the song on itunes?

1. Delete the song from your iTunes library
2. Redownload it via the Purchased link under Quick Links
(Quick Links is on the right-hand side of the iTunes store home page on your computer's iTunes)
3. Check and play song- it should play in its entirety now. If not contact support.

I just downloaded a album on Itunes and it only plays half the song on ever song?!?

I want the full songs or my money back!

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

I just downloaded an album and it only downloaded half the songs and wont download the rest. what do i do?

zx

Try here:
iTunes: How to resume interrupted iTunes Store downloads
Also here:
How to report an issue with Your iTunes Store purchase

Double sided printing to Canon C2620

Hi, I have a problem with a couple of documents I am trying to print double sided from Indd. I have chosen double sided printing in the canon settings but it doesn't work. When I check the settings again, it has gone back to double sided 'off'. Is this Indd or the printer? I have tried making sure my master is double sided as it was a single sided document to start. I have also tried a save as which does not work.
Any help greatly appreciated.
Thanks very much.

INX - InDesign Interchange format.
> Export your document to the InDesign Interchange format and then open the exported document.
This seems to be a pretty good cure-all for a lot of niggling issues (links that can't be deleted, pasteboard size that is too large, to name two). As of build 838 (April 2005) of InDesign CS and the initial release of InDesign CS2, there are no known problems with files exported to the InDesign Interchange format and then reopened in InDesign.
You are advised against just overwriting your original; instead, keep it as a backup in case your use of this procedure exposes some other weakness yet to be discovered.
FWIW, I've taken to routinely doing this at the begining of newsletter projects when I basing a new issue on the previoius one.
Dave Saunders, "[Perm] Frequently Encountered Problems" #5, 26 May 2004 4:24 am

Double Sided Printing on Envy100 D410c

Is there any way to set double sided printing as the default so that long pdf files sent through e-print will be printed double sided, saving a ton of paper?

Unfortunately ePrint does not support double sided printing. You could try printing using iPrint or Airprint to get double sided printing.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Why does my new Adobe Reader XI not allow double sided printing?

Why does my new Adober Reader XI not allow double sided printing as the previous version did?

Moving this discussion to the Scanning & OCR forum.

Why is only half the page printing

i have a Deskjet f380 when i want to print a page, the preview shows only half the page. and it will only print half the page. i checked the setting and they seem to be fine, what gives?

Suddenly my HP J5780 printer releases pages that gradually lose printing -- top of the page OK, middle weak, no bottom. What to do?

Double sided printing on HP officejet 7410 and windows 8.1

I recently had to upgrade to a new computer with Windows 8.1 and after downloading the driver for my old HP Officejet 7410 All in One WITH the double sided printing attachment, I cannot get it to print on both sides automatically, as in the printer setup there is only "print one page" or manually print double sided. I continue to get the manual print instructions to turn the pages over. I have downloaded the driver twice and cannot find an option for the double sided driver. The printer still prints double sided automatically with the other old computer i have.
Help ~ wanting to print double sided!

I have the same problem. I have the HP Officejet 7410 that supports automatic double sided printing. I recently upgraded to Windows 8.1. I installed the most recent software and drivers from the HP support site. But automatic double sided printing is no longer an option. What's up with that HP? How about a fix?

Last page of pdf inverted when double-sided printing

Last year, my old tower Mac (OSX10.7.5) suddenly began printing out the last page (only) of any PDF with an odd number of pages inverted in both vertical and horizontal axes (i.e. upside down mirror-writing), when doing double-sided printing on our HP Color Laserjet CP4005dn. Single sided printing from the same Mac and PDF worked fine. The same last page also prints correctly if I simply chose to print that page alone. I do not have the 'flip horizontal' checkbox ticked. I could find no solution.
I bought an iMac 27" late 2013 with OSX 10.9.4: all upgrades installed. I still have the same problem. I repeat, this only happens in double-sided printing (selected 'long edge binding' under Layout) of the last page of a PDF with odd-numbered pages. Word .docx and other documents print just fine from the same computer and printer with same settings in the Print dialogue.
Any suggestions?
MacBook Pro, OS X Mavericks (10.9.4), plus iMac 27" OSX 10.9.4

Hi,
Please take the footer subform from the tables section and position it on the page where u want to print and write the script so that it will print only on last page.
Regards,
sasi

How do I enable double sided printing on my iPad through the HP ePrint app?

HP Laser jet 1102w
I have Windows 7 64 bit and a original iPad.
I would like to save paper when I am printing from my iPad. Is there a setting to enable double-sided printing when printing from an iPad using the HP ePrint app?

Hi,
Printing a manual duplex printing is not supported by the HP ePrint app or AirPrint as well, it can only be done with printers who provide automatic two-sided printing.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

7410 double sided printing

Well here I am again with printing problems.
I have a Mac Book Pro using OS 10.9.5, Mavericks. I managed to resolve my Print/Scan problem with Shlomil's help. Also, he helped me some time ago with a double sided printing problem. Now I find I have the same double sided printing problem but am unable to follow his advice (which fixed the problem last time)....
Now, The two sided printing box does not appear on the print drop down menu! So, I went on to the following (using the last advice Shlomil provided)...
"1. Verify the duplex-printing accessory has been installed properly. To verify this open the System Preferences and go to Printers & Scanners. Open the print queue of your printer. Click on Printer Setup and from the tab menu choose Driver. Verify the box next to HP Two-sided Printing Accessory (Duplexer) is checked."
However, when I select the "Open Print Queue" there is no "Printer Setup" on the tab menu. So, I can't verify the "HP Two-sided Printing Accessory (Duplexer) is checked " (unless I'm doing something wrong). I and went on to #2.
2. On the File menu, select Print. The Print window appears.
NOTE: The Print window might be minimized. Click on Show Deatils to see all available settings.
3. In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
I skipped the above step since the two sided printing box does not appear on the print drop down Menu (and no expanded print window available).
I went on to #4.
4. To select the binding type click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
5. Select Layout from the drop-down menu.
6. Set the Two-Sided option as Long-Edge binding (Portrait), or Long-Edge binding (landscape).
Now, I don't show a "binding type" In the Layout" selection in the drop-down menu, etc.
Shlomil suggested if this didn't work to reset the printing system. I'm really scared to do that because I have 3 printers and a scanner in different locations. When I selected the reset printing system the drop down said it would delete everything...all printers, scanners, faxes, etc.
Is there any other less severe solution? I'm stumped! This all worked before (two sided printing, print/scan). The only thing I can think of is when I correct permissions or update to a newer OS.
Please HELP!
This question was solved.
View Solution.

Well...I can't believe it! Please disregard my ramblings.
I mucked around in the printer stuff and in System Preferences "Printers & Scanners", selected "Options & Supplies" rather than the "Open Print Queue" and then selected "Options". The "HP Two-sided Printing Accessory (Duplex)" box was located there. It was not checked. Although I don't know how it got unchecked, I checked it and it fixed my problems.
Thanks Again

I chose double sided printing and it only printed half the pages. it didn t ask me to flip them

Similar Messages

Maybe you are looking for