I cleaned my screen with method glass and surface cleaner and now the color is off. What can i do?
I cleaned my screen with methid galss and surface cleaner and now the color is off on my screen...What can I do?
Clean it again, very carefully with a cloth dampened with water only (NOT WET), if it will not come back to normal you can have the screen replaced by Apple, this will not be under warranty.
From now on just use a damp (NOT WET) cloth and a lot of care.
Never spray on the screen, always have the iMac off when cleaning with any kind of conductive fluids (water)
Similar Messages
-
My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?
Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694 -
hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?
You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808 -
MacBook Pro continues to reboot then shows main screen with flickering green and white lines then restarts again what the heck is wrong with it?!
Sorry we can't assist with that, you'll have to take it to Apple.
If it's not worth fixing then you may be interested in this User tip
My computer is not working, is my personal data lost? -
My Kids were playing with my phone and now the majority of my contacts don't show up. If I use Siri, my phone will find and call the number even though it is not showing in my contact list. How do I restore my contacts?
Call mum and dad are in the contact of yourself.
You have to manually add it back or if you have contacts in your computer addressbook, you can sync them back. -
my iphone screen is broken and i wanna restore the phone but i can't because i enable the 'find my iphone' and now i cant restore it . what can i do? help me plz
There's no way to "restore" your phone, but, you can login to iCloud.com, using your computer, locate your phone, then erase it.
-
I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?
I'm having the same issue. After opening Audio Midi Setup in Utilities I noticed that the master volume slider of the Built-In Output is very low. I am not able to slide to get any more level out of the system.
Can you adjust the master volume on your system? -
I have an iPad 1 and cannot get the Apps to complete their updates. I have deleted my account, reset the iPad, signed back into my account, synced with my Airbook and they still won't update. what can I try next? Thank you
Look and see if you have a stalled download in iTunes - it could be a song or a podcast - if there is something that has not completed in there, your app updates will not download. Finish those downloads first, if you have any.
Check to make sure. -
I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?
iLife '09 is not available as a download - it is only available as a purchase
iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
Exactly what did you do? And exactly what does the error message say?
On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
LN -
My waterbottle leaked on my ipod touch and now the headphones dnot work what do i do ?
my waterbottle leaked on my ipod touch and now the headphones dnot work what do i do ?
Take it to a Genius at your nearest Apple store. They can evaluate the device and see what's wrong with it.
Remember that water/liquid damage is not covered under the warranty, so you will most likely have to pay for a replacement -
I havent used my ipod for sometime and forgotten the 4 digit passcode what can i do
i havent used my ipod for sometime and forgotten the 4 digit passcode what can i do
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document.
copied from: http://support.apple.com/kb/HT1212 -
ive damaged the aux in port and now the volume is locked. how can i enable my internal speakers?
rizmasterp,
Thsi not a lot of nfo to go on, nor have you included the OSX, model of you MBP. PLease post that so that anyone reading this might be able to offer some help, as well as some more info on "I've damaged my aux port.
That being said, all I can suggest is to go to system preferences>sound>output tab and see if you can select internal speakers.
With the info available all I would otherwise suggest is a pram reset:
Power off the MBP, Power back up holding option, command, P R (no commas) hold these immediatly afterpower up, contine to hold them till you hear the start chime 2 times then release. See if your speakers work.
Post the afore mentioned info and someone here might be able to offer some more help. If in fact you have physically damaged the port that might require repair from Apple r an authorized Apple service provider. (AASP)
Best -
my daughter changed her password and cant remember it and now the ipod is diasbled what should i do
Providing she regularly synced her iPod, her purchases should be in her iTunes library. If this is the case, then you can simply reset her iPod and put all of her data back on it although I don't know if this works with apps. If she synced it before she reset the pass word then you can stop the auto sync, restore, and put the back up on it. If all else falls, iTunes and the App store remember purchases so you can't buy the same thing twice, well at least I haven't. I hope you find this helpful, and good luck getting her iPod back into usable condition.
-
i had a update for lightroom cc but it faild and now the update is gone; what did go wrong?
Launch Lightroom application and under Help menu , click on Check for Updates or Updates option and check.
-
My iPod Touch fell into the washer and now does not start. What can I do to fix it?
If it is totally dry:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
Maybe you are looking for
-
AAMEE 3.1 deploying Adobe Drive 5
Hello The documentation for Adobe Drive 5.0 says to use AAMEE 3.1 for deployment however when i try i get a valid installer could not be found. I have the Adobe Drive 5.0 dmg mounted. This worked fine for Adobe Drive 4 Any ideas? Thanks
-
I try to implement the use of the letter of credit in SAP, all is working good except when I want to do a new control between the sales order and the financial document. When I want to do a new control in the sales order (VA02), in the header Billing
-
Recording the total of a rolling sequence
I am recording times taken for a production sequence to complete. The time is recorded in seconds by the plc, which counts upward from zero until the production sequence has completed, after a short pause the plc resets itself to zero and repeats the
-
Subcontracting Check Box in Maintenance Order
Hello Help me to know if we are able to create the PR via control keys PM02 & PM03 then what the use or funcationality of subcontracting check box in maintenance order. Regards Kapil
-
TS2755 How to stop sending iMessages as an email
My phone keeps sending my messages from my email. It won't let me change my settings to receive iMessages to my phone