I click *disable protection on this page* from the shield icon and it closes the window, it won't allow access to this http&https site but I know & trust it.

I am going to a website I trust. I launch the link, the page comes up blank with the padlock icon with a message that says Firefox has blocked content this isn't secure. I know the site is https but has some http content. I click the *disable protection on this page* button, but it doesn't allow the site to resolve. It closes the page. How do I get the site to resolve, especially since I know & trust the site?

Can you please give the link to that site so I can test it.

Similar Messages

  • How can I re-enable "Disable Protection on This Page " option?

    Accidentally chosed option Disable Protection on This Page instead of Not Now.
    Because of that my antivirus program is launchig warnings very often.
    It bothers me a lot and scares me.
    Please, help me.
    Thank you.

    The warnings may be related to content injected by an add-on. You may check for unwanted extensions on the Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, if in doubt, disable.
    Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Does that help?
    If you do find anything suspicious, it would be a good idea to also:
    (1) Go to the Windows Control Panel, Add/Remove Programs, and click on the Installed On column heading to bring the most recent additionals to the top. You may be able to remove crap here.
    (2) Supplement your regular security software with some additional "on demand" scans using the clean-up tools listed in this article: [[Troubleshoot Firefox issues caused by malware]].

  • I downloaded Maverick and now I can't open pages from the Dock.  The Pages icon just jumps up and down abut doesn't open.  However, I can one pages by clicking on the App. I have an iMac with iWork 08.

    Since upgrading to Maverick from Mountain Lion I am unable to open Pages from the Dock.  When I click on the pages icon in the dock the icon just keeps bouncing up and down.  However, I can open pages by clicking on the icon in the Apps folder.  No problems prior to upgrading to Maverick.

    Quit Pages. Drag its icon out of the Dock. Create a new one by dragging the application into the Dock. Test.

  • Any way to turn off errors when updating pages from the template?

    I'm using Dreamweaver MX. My site is huge. It's an intranet
    spanning dozens of departments. Some of those departments have
    subsites that don't fall under the intranet's control, although
    they are embedded within our site's folder structure. When I make a
    change to the template and update pages, every time I hit one of
    those subsites I get tons of errors, from "template not found" to
    "unmatched body tag". The errors that pop up each have to be
    clicked on before the updating can continue. I get hundreds of
    these.
    Is there any way to make errors not pop up while updating
    pages from the template? Or even to exclude certain folders from
    being checked? (Cloaking doesn't do it.)

    > I'm using Dreamweaver MX. My site is huge.
    Both of these are problems, I'm afraid. Combining that with
    templates is
    really trouble.
    > "unmatched body tag".
    Errors such as this are definitely caused by errors in your
    page itself.
    Can you show me a page where you would get this?
    > Is there any way to make errors not pop up while
    updating pages from the
    > template? Or even to exclude certain folders from being
    checked? (Cloaking
    > doesn't do it.)
    Valid code will not produce these errors. Unfortunately, the
    only way to
    avoid them is to remove any validation hiccups from your
    pages.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "abna" <[email protected]> wrote in message
    news:f14ue2$pk5$[email protected]..
    > I'm using Dreamweaver MX. My site is huge. It's an
    intranet spanning
    > dozens of
    > departments. Some of those departments have subsites
    that don't fall under
    > the
    > intranet's control, although they are embedded within
    our site's folder
    > structure. When I make a change to the template and
    update pages, every
    > time I
    > hit one of those subsites I get tons of errors, from
    "template not found"
    > to
    > "unmatched body tag". The errors that pop up each have
    to be clicked on
    > before
    > the updating can continue. I get hundreds of these.
    >
    > Is there any way to make errors not pop up while
    updating pages from the
    > template? Or even to exclude certain folders from being
    checked? (Cloaking
    > doesn't do it.)
    >

  • When I open Pages from the dock, the page comes up but immediately hangs up with the

    When I open Pages from the Dock,  the page comes up on the screen but immediately hangs up with the rainbow circle spinning.  I finally have to force quite to make it go away.  It does not ask me to choose a template.  This is sporadic, sometimes working, sometimes not.  What is going on?

    Helo,
    Did you try to delete Pages' preferences file(s) in the folder your-user-name/Library/Preferences ?
    There are one or more (depends on your OS X version) file like "com.apple.iWork.Pages.plist"
    You can also repair permissions with Disk Utility in the folder Applications/Utilities.
    Choose the hard drive were Pages is and click the button "Repair permissions".
    Or you can re-install Pages.
    Hope this will help.

  • Every time that I try to print a page from the internet, my Mac crashes and I get a "Crash Reporter" icon.  Any suggestions?

    Every time that I try to print a page from the internet, My Mac (Maverick 10.9.4) crashes and I see a "Crash Reporter" icon.  Any suggestions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Open HTML page from the stage

    How can I open a HTML page by pressing a button on the stage?
    I've created a rollover button and I'm trying to make it open
    an existing html page from the local disk (not an internet URL).
    But I can't make it open with Lingo or behaviour.
    Please help.
    Thanks a lot.
    Gideon.

    goToNetPage "
    http://somewhere.html" is the
    typical form for a page on
    the web, director must use the address format the system's
    browser uses
    for local files, this is somewhat platform dependant, a
    practical
    aproach is to open the file in question from within your
    browser then
    copy and paste the displayed address into your lingo code.
    Some report the goToNetPage counterpart provided by the
    buddyAPI xtra
    works more reliably, the xtra can be used for free if limited
    to a
    couple of functions.
    An alternate approach buddyAPI can use is to have the browser
    directly
    access the html file as if it were double clicked in the file
    manager
    using the same form commonly used to open PDF files with
    acrobat.
    (sorry I don't have example code handy)

  • Warning: The disabled test "SomeTest" was removed from the test run.

    Hello,
    When I mark test with Ignore attribute, mstest show the next message: Warning: The disabled test "SomeTest" was removed from the test run. And I don't want to see this warning.
    The question is: Is there any option to hide this warning, turn it off.
    Sincerely,
    Alex

    Hi Alex,
    I think I could repro this issue. For the Ignore attribute, it would share us this warning message by design when we run it in MsTest.exe.
    You could submit this feature request:
    http://visualstudio.uservoice.com/forums/121579-visual-studio.
    The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Message- Print No pages from the document were selected to be printed

    I have had this application for some time, simply never used it.  Last night I tried converting a PDF file to word, unsuccessfully, I might add.
    Today, whilst printing a page, my printing settings appear to have been reset because when I selected Print selected page, the following message appeared:
    Print
         No pages from the document were selected to be printed message
    How do I reconfigure my settings to preview rather than defaulting to PDF?  Kindly advise.  Cheers.

    I have only been able to print by exporting from iphoto. I have a new HP printer and there is software that supports photo printing ("HP photo smart") and I have been able to do it this way. On some occasions I have been able to use the iphoto>print>then preview before actually printing. There is a print option on the preview pane and that has worked on occasion...unsure why it doesn't work always. Please pass on any other hints, or let me know if this works for you!!
    G4 Power book 867Mhz   Mac OS X (10.3.9)  

  • How do I remove my iWeb pages from the Home folder so I can publish to a new host?

    I have moved my MobileMe site to a new service (GoDaddy).  The basic transfer went very smoothly.  With one tiny hitch:  the new URL text.
    IWeb places web  pages in folders, each folder being a  "site." The name of the root folder automatically becomes a "pointer" to the web site -- and part of the URL text.
    My current root folder  is named DavidChartrand -- me.  So..... when I published everything over to GoDaddy the text "DavidChartrand" was attached to my URL. 
    Instead of seeing www.davidchartrand.com in the URL bar, visitors  see:   www.davidchartrand.com.com/DavidChartrand
    GoDaddy staff says this is simply a quirk in iWeb's design.  Fine, but it's annoying.  Is there anyway I can keep using iWeb but somehow remove the root folder.....that is, remove my site pages from the root folder and and then re-publish? GoDaddy tech support swears it  has many former MobileMe/iWeb users who have done this successfully but offered had no idea how.
    David

    The way iWeb publishes its websites, in its own folder, the normal URL is http://www.domain_name.com/Site_name/Page_name.html.  This is a normal URL for any web host.
    If you want to get rid of the site name you will need to publish your website to a folder on your hard drive and upload only the contents of the website folder to your server with a 3rd party FTP client like YummyLite, Transmit or Cyberduck.  That will get rid of the site name in the URL. 
    Of course remove the existing website foldr from the server beforehand.
    I believe the folder you publish to on GoDaddy is named public_html.  You might try renaming your website to "public_html" and publish to GoDaddy.  In theory iWeb will see the website's folder already on the server and publish the website file into it. 
    It works that way with HostExcellence.com which names the home folder the same as the domain name associated with it. This tutorial explains more about it: iW16 - Using HostExcellence.com with iWeb
    OT

  • Unable to print to PDF Oversize pages from FrameMaker 9.0 and 7.2

    Hi All,
    I am trying to print to PDF a publication that is full of oversize wiring diagrams. The pages are all images ranging in size from standard A3 and A4 siz sheets through to a foldout being 1470 mm W X 297 mm H. We have no problem printing A3, A4 and 630 mm W X 297 H. These are all Portrait images. When we set up our custom print size to accomodate the 1470 mm W X 297 mm H we get the pages without the content, and even some of the oversize pages are not the correct size on print.
    The page sizes we are using are:
    A4
    A3
    630 x 297 mm
    840 x 297 mm
    1050 x 297 mm
    1260 x 297 mm
    1470 x 297 mm
    The procedures we are using to set up the printing are:
    1.      Print to PDF (Do not Save to PDF, you do not have control over paper sizes)
    Under Print Setup make sure you select PDF Driver and select the Paper size as largest that is in your book.  Example: If A4 and A3 pages, print to A3
    2.      Select Generate Acrobat Data and select
    Note: Back in FM Print dialogue; make sure Print to File is turned OFF, before you click Print
    Any assistance would be greatly appreciated.
    Regards
    AJ Wilkinson

    AJ,
    I tried to duplicate the scenario and ran into issues when using very wide custom pages. For whatever reason, FM tries to output the 1497x297 as 297x1497, no matter what the controls for Portrait or Landscape are set. Also changing the dimensions in the printer instance Custom Page Size didn't seem to have the desired effect.
    I checked the .ps files being produced, and in all cases the page and file Bounding Boxes get defined as:
    %%PageBoundingBox: 0 0 842 1786
    %%BoundingBox: 0 0 842 1786
    Whereas, in the same file the custom page size is defined as:
    %%BeginFeature: *CustomPageSize
    1786 842 0 0 0
       4 dict begin
       3 1 roll
       2 array astore /PageOffset exch def
       2 mod 0 eq {exch} if
       2 array astore /PageSize exch def
       /ImagingBBox null def
       currentdict end setpagedevice
    %%EndFeature
    Note: that the H W components are transposed.
    Something is definitely screwy here. The content appears to be created off the page in many scenarios.
    I tried all permutations of H W, Portrait/Landscape and Paper Feed directions, but could not get output created that had the long dimension horizontal (i.e. landscape orientation). Even with pre-defined page sizes, I wasn't completely able to control the output orientation.
    I then changed the defined page size within FM from a portrait aspect ratio, i.e. H > W to a landscape, W > H. I was then able to get the content appearing correctly in the 1497x297 layout. It looks like FM is trying to be "smart" and thinks it knows better as to what you want on output.
    First, check that your FM page size has W > H. If printing from a Book, where you have mixed page sizes and orientations, I believe that the first file sets the orientation for the whole lot. So if the first one is a standard portrait page and you have large landscape inserts, and are trying to print to oversize pages in the landscape mode with Generate Acrobat Data on to ensure page sizes are cropped - you're going to have orientation issues with the larger pages.
    Try printing these large page sizes separately and use Acrobat to replace the pages from the book output.

  • Issue in Dreamweaver PHP pages from the PHP template

    I am learning to develop and publish a web catalog with a shopping cart feature attached. I am using PHP and MySQL as the tools to build this data driven website. However after creating the catalog list within the PHP template and needing the list as the menu within the sidebar of the webpages, the catalog list shows in the PHP template in Dreamweaver. But once I try to create a sub page from the PHP template, the list and all the contents does not show in the preview. After much checks, there is a issue with the sidebar class of the div, the issue is that a message shows that "Any content that does not fit in a fixed-width or -height box causes the box to expand to fit the content rather than letting the content overflow." I have tried to put the overflow:auto or overflow:hidden but to no success. How can get the catalog list to show without manually entering the over 50 categories that is already entered in the MySQL database? The template uses the 2 column fixed, sidebar, header and footer layout.

    It's a little hard to understand your question and its context. Can you please upload this page and give us a link so we can see what you are describing?

  • How to exclude last page from the total number of pages counter

    Hi,
    I am customizing the payables remittance RTF template, our requirement is to reset page number to 1 for each payment, i am able to achieve this using "@section"
    also we have a requirement to have a summary page at the end, i am able to get this using "start@last-page:body".
    issue is last page is also considered in the page counter of the last payment.
    i.e. suppose if i am generating remittance for 2 payments which are printing details in two pages and one page respectively, my output will have total 4 pages and it's showing
    Payment1 page-1 footer -> 1 of 2
    Payment1 page-2 footer -> 2 of 3
    Payment2 page-3 footer -> 1 of 2
    Summary page-4 footer -> 2 of 2
    but i wanted to see
    Payment1 page-1 footer -> 1 of 2
    Payment1 page-2 footer -> 2 of 3
    Payment2 page-3 footer -> 1 of 1
    Summary page-4 footer -> 1 of 1
    Any idea how to remove the summary page from the page counter.
    Rgds,
    -Kamal

    I'm not sure how it was in Acrobat 9, but in XI you add a Header/Footer and
    one of the options it "Page Number and Date Format", where you can select
    the format of the page number to add, some of them contain the total number
    of pages (such as "1 of n").

  • How do extract one page from one pdf document and save as a new pdf?

    How do I extract one page from a pdf document and create a new document?

    In Acrobat: Tools - Pages - Extract.
    In Reader it's not possible.
    On Sat, Jan 31, 2015 at 10:29 PM, Ned Murphy <[email protected]>

  • Is there a way of hiding certain pages from the preview at the bottom of the ipad screen in ibooks author?

    Is there a way of hiding certain pages from the preview at the bottom of the ipad screen in ibooks author?
    I'd like to only show the first page of a section in ibooks author's preview.

    Thanks for your reply, Ken. I did start a separate topic for this but it didn't seem to publish properly.
    I've posted it again here:
    https://discussions.apple.com/message/19816933#19816933
    I assume you don't know why this is happening to my TOC?

Maybe you are looking for