I close the browser and save my tabs. When I next open the browser the tabs were not saved.

After my last Windows update I have been unable to save my tabs once I close FF. I choose the save tabs option on closing the browser but upon reopening it goes to my homepage and the saved tabs are gone.

Thanks cor-el but that is not the case unless something is clearing History automatically. I think that's set for a long time (30 days +) prior to clearing the cache. I checked on the off chance that 'today was the day' but I've plenty of cached sites in my History.
I'd suspected something in the Windows Updates but then the problem would be more viral and apparently I'm the only one 'suffering' from it.

Similar Messages

Let Users Annotate A PDF In Browser And Save To Server?

I started this discussion here.
I have a bunch of PDF documents. I want users to be able to make annotations in their browser, and save them back to my server.
If I use Acrobat X Pro and click on "Send For Shared Review", then it behaves the way I want. However, I don't want to have to manually open Acrobat every time for each file.
Unfortunately, the Acrobat X SDK doesn't support this feature.
I heard that there's another way to do this with FDF files and LiveCycle. Is that right? How do I do that?
What I want is very simple. I want to write a program that will:
- Take a pdf file from my server.
- Enable the users to make annotations in their browser, as if I used "Send For Shared Review"
- Save the annotations back to my server.
- Merge the annotations into a new PDF document.
I can do this with Acrobat via the GUI. I want to write a program that does if for me. Can I do this with LiveCycle?

Thanks for the reply.
I know that having them both is not only unsupported, but has been a huge pain in the rump. However, This team needs Acrobat, and corporate policy as of yet hasn't been edited to allow the removal of Reader.
While it's been a pain for other issues, The users have been running both for around 12 months now, and the save button has always worked. Suddenly yesterday afternoon (after it had been working in the morning) the save is grayed out. There must be some configuration issue that has caused this...
I'm near the point of having acrobat uninstalled/reinstalled, and the reg entry we found to get them both working re-applied, but that's kind of a worst case option at the moment.

Is there a way to open Excell file from the server and display in the UI and save it back on to the

Hello there,
Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

Hi Mike,
Welcome you to the forum.
You may try:
SELECT * FROM MyDBNameHere.dbo.OUSR T0
Thanks,
Gordon

How to download a file from the net and save it into .txt format in a datab

Can some one show me a tutorial on how to download a file from the net and save it into .txt format in a database?
Thank you,

http://java.sun.com/docs/books/tutorial/networking/urls/readingWriting.html

If I am browsing on site such as Ebay or any shopping site, and click on an item, when I return to the search page I am once again at the top of the page and have to search down for where I was in the list of items.

If I am browsing on site such as Ebay or any shopping site and click on an item, when I return to the search page I am once again at the top of the page and have to search down for where I was in the list of items. This is not only on Ebay it is everywhere I search. Firefox goes back to the top of the page . It is annoying to have to figure out exactly where I was if I left the page and then returned. This is a hinderance when using Firefox. I have considered uninstalling it because of the inconvenience of 're-searching' after already doing a search. Firefox used to take me right back to where I was if I left a page, but that feature is not working now. I am not sure how to change this in the settings.

Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

I did a force close on Safari and after rebooting my macbook pro, i no longer see the Safari icon on the dock. How do i get i back?

I did a force close on Safari and after rebooting my macbook pro, i no longer see the Safari icon on the dock. How do i get i back?

If you can't get dragging to work, just click on Safari from your Applications folder, and it should appear in the dock. Then you can right-click on the icon and PIN it permanently there.

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

Ntenich,
If your table has a Header and your Legend text is in the header, it will be picked up by the table.
Jerry

In action script, how would I be able to capture animation on the stage and save it to a file

using action script how would I be able to capture video that's playing on the stage and save it as a file

Are you still using iphoto?
If so you should NOT move the iphoto library to the TC and use it.
Apple says you will corrupt the library doing this.
http://support.apple.com/kb/TS5168
Although mostly about FAT32 it adds network drives.
http://support.apple.com/kb/HT1198
Now what I cannot tell you is if the same rules apply to the new photo app. Apple might have fixed the problem.
For iphoto you should offload the photos to USB drive plugged into your computer.. or any external drive.. the faster the interface the better.
Apple have explicit instructions for moving the library.
iPhoto '11: Move your iPhoto library to a new location

Are my iCloud photos stored? I lost phone abroad and want to access the photos and save them to my iPad.

are my iCloud photos stored? I lost phone abroad and want to access the photos and save them to my iPad.

Photo stream photos remain in iCloud for 30 days, and can be accessed by enabling my photo stream on another iOS device or computer. Shared streams remain in iCloud indefinitely, and can be accessed by enabling Photo Sharing on an iOS device or computer. Your camera roll photos are included in your device backup. Restoring the backup to another iPhone or iPod touch should recover them (unfortunately, you can recover them by restoring an iPhone backup to your iPad). If the backup is an iCloud backup be aware that Apple will delete it after 180 days of inactivity so you'll want to restore the backup prior to that.

How do I download a photo off the web and save it to my desktop or send to anotherd

How doI download a photo off the web and save it to my desktop

Drag the picture off the wb page to a empty spot on the desktop and let go, it will create a file.
From there you can upload it as a attachment when sending a email.

Running queries in the background and save in a folder

Hi,
I have a requirement where I need to schedule a query in the background and save the output in a folder as a new excel file. How can I do that? Does any one have any ideas or thoughts? I appreciate your help with reward. Thanks,
Regards,
Rao.

Hi VVR,
Thanks, That was very useful piece of information.
Regards,
Rao.

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

Binbashi
You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
Looking forward to learning of your results.
Thank you.
ATR

Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with a Anritsu make(model-MS710) Rf spectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire from the instrument and save the data in PC.the data

Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with an Anritsu make(model-MS710) RFspectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire data from the instrument and save it in PC for printing purpose.

Hello,
Unfortunately I was unable to find a driver for this instrument. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
http://www.ni.com/devzone/idnet/other.htm
We develop drivers in CVI and LabVIEW based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one. While this would not provide you with a QBASIC program, you may be able to create a DLL that you could call from QBASIC.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndica
te of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance
Good Luck,
Kim L.
Applications Engineer
National Instruments

I have been unsuccessful merging serval pdf files into one file. I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version. When I open the file I think I have saved, it shows only the original pdf. Advice would be

I have been unsuccessful merging serval pdf files into one file. I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version. When I open the file I think I have saved, it shows only the original pdf. Advice would be appreciated. Thank you.

wouldnt it be easier if you could do something like this?
https://discussions.apple.com/thread/3392535

Can't find instructions for setting a PDF form to allow users to type in the fields and save the form. Thanks

Can't find instructions for setting a PDF form to allow users to type in the fields and save the form. Thanks

Hi,
Have a look at this page Acrobat refers to them as "Reader Extended PDF", Adobe Acrobat X Pro * Enable Reader users to save form data
Regards
Bruce

I close the browser and save my tabs. When I next open the browser the tabs were not saved.

Similar Messages

Maybe you are looking for