I configured CIN but........

hi,
sap gurus,
good eve to all,
i configured CIN and excise duties are appering in billing document and accounting documents.
but
when ever i go to J1IIN for excise invoice generation with reference to billing document.
itis asking for excise group and series and group i have given that also.
but
the values are not getting updated into the excise invoice and excise register case is also the same.
but
sales tax register is getting updated.
i dont where i am wrong.
please guide me on this.
regards
balaji

HI,
sir,
ok which condition types i have to maintain there sir
the condition types which i have taken for excise duties calculation and which are appearing in sales
order naa. i maintained that also but the problem is continuing
regrds,
balaji
Edited by: balaji timmampalli achari on Oct 14, 2008 5:11 PM
Edited by: balaji timmampalli achari on Oct 14, 2008 5:50 PM

Similar Messages

[svn] 3519: Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service .

Revision: 3519
Author: [email protected]
Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
Log Message:
Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xml

Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲

Acquired ayrport Express, configured it, but how to create one that I could plug in other devices, it needs to register each new device that connects to it .... What to do?

Acquired airport Express, configured it, but how to create one that I could plug in other devices, it needs to register each new device that connects to it .... What to do?

Acquired airport Express, configured it, but how to create one that I could plug in other devices, it needs to register each new device that connects to it .... What to do?

How will i configure CIN

how will i configure CIN...

Please go through this WIKI
[CIN Configuration |https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/cinConfiguration%28India%29]
thanks
G. Lakshmipathi

Hello - i just got an iphone in Dubai - i'm trying to configure it but there some instructions are in Arabic (I'm non Arabic speaking) - this specifically happens when I'm try to sign in to create a new apple ID

Hello - i just got an iphone in Dubai - i'm trying to configure it but there some instructions are in Arabic (I'm non Arabic speaking) - this specifically happens when I'm try to sign in to create a new apple ID

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
The reset link for the security question will send the email to your rescue email account : http://support.apple.com/kb/HT5312 - that is the email account that you are checking, and you've checked the spam folder on it as well as the inbox, and tried clicking the reset link again ?
If you aren't receivineg the email then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 link above to view your rescue email address to check that it's correct, in case you need to use it in the potential future use

Dreamweaver CS6 hangs when trying to close it. (iMac, Yosemite). I have removed the configuration folder but it doesn't help. What to do next?

Dreamweaver CS6 hangs when trying to close it. (iMac, Yosemite). I have removed the configuration folder but it doesn't help. What to do next?

OS X Yosemite: If an app freezes or quits unexpectedly
Nancy O.

Recompiled from LV6.1 to LV7.0, now I can't configure CIN

I have a VI using a CIN that works in LV 6.1 and in LV7.0 (no CIN load errors). BUT, I can't configure the CIN in LV7.0, even after reloading the .lsb file. All the inputs are unnamed as well (the pop-up says simply 'input'). But the vi still works. I have all the source code for the .lsb files.
Any ideas what's happening here?
Thanks.

vituning wrote:
> I have a VI using a CIN that works in LV 6.1 and in LV7.0 (no CIN load
> errors). BUT, I can't configure the CIN in LV7.0, even after reloading
> the .lsb file. All the inputs are unnamed as well (the pop-up says
> simply 'input'). But the vi still works. I have all the source code
> for the .lsb files.
What sort of configuration would you want to do on a CIN node? Are you
sure you don't confuse this with the Call Library Node?
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

I have bought an airport express after being assured that I will be able to print from my IPad. I have installed airport utility on my Hp laptop and it is configured correctly but the printer I have is showing neither on laptop nor on IPad. Can u tell how

I bought an airport express after being assured that I will be able to AirPrint from my IPad. I have set up airport utility on my Hp laptop and configured it properly with the express. But still I'm not able to detect the printer attached to the USB port of airport express, neither on my laptop nor on my IPad. Can someone tell me if and how it can be done?

Who assured you that an AirPort Express would allow you to use AirPrint from an iPad. They were incorrect.
AirPrint from iPads and other iOS devices is only supported on a select few wireless network printers that expressly advertise that feature. An AirPort Express will not add that feature to a printer that does not support AirPrint. Also, for printers that do support AirPrint a wireless access point is not required since the printer needs to support wireless networks connections internally.
The HP laptop should however be able to print to the printer connected to the AirPort Express. Try also installing the Bonjour Print Services for Windows. It will make printer discovery a lot easier when using Bonjour enable devices like an AirPort Express.

[Resolu] net configuration ok but can't ping or pac

Hi everybody, in advance i apologize for my english (not birth language)
I'm new in arch world. I have installed arch with cd as source.
Then, the time to config my wifi interface has come. By default, my ethernet and wifi card are reveled with ifconfig and iwconfig
So, I do the normal way with :
> ifconfig wlan0 up
> iwconfig wlan0 mode managed channel 1 key off essid secret_name (:p)
For the moment all is ok, when I tape again iwconfig, I saw that I'm connect at this box but when I want to ping, no response are coming back, and when I want to use pacman ( like pacman -Sy worg worg-clients xterm) I have the same response from all the miror.
> "Error failed retrieving file 'xxxx.tar.gz' from miror : xxxx Transient resolver failure"
I don't know in wich direction I have to search, thanks for help
ps: I have thought to decomment all miror in the appropriate file.
Last edited by kafka (2009-09-16 20:55:48)

Thanks you very much, when I type it, it give me an ip address. But some question it adds to me.
Why, like for an ethernet configuration, it didn't give me directly an ip address ?
And I want to add that the result of iwconfig before and after the command give the same result. But, I was thinking that the ip is certainly write with ifconfig command (the reboot time make me thinking )
So thanks you !

Windows Updates not showing in Configuration Manager but Endpoint updates are working

I have an issue which I have found whilst creating ADR's. I currently have an Endpoint ADR Set up and working and tried to set up a Windows 7 update ADR but cannot get Configuration Manager to locate any updates, I even change properties to just select
the product 'Windows 7' but when pressing preview I still get no results.
This is the output from ruleengine.log when I try to run the rule.
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\4.RUL
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
Refreshed ScheduleList instance for Rule (1) from schedule string (0153BB0000100100) with next occurence (19/11/2014 12:00:00)
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
Refreshed ScheduleList instance for Rule (4) from schedule string (5173BB0000100008) with next occurence (20/11/2014 11:20:00)
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
FindNextEventTime found next event for RuleID 1 as :19/11/2014 12:00:00
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
RuleEngine: Got next rule execution time successfully. Next event is in 30 minutes
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
Sleeping for 15 minutes SMS_RULE_ENGINE
19/11/2014 11:29:20 3844 (0x0F04)
Constructing Rule 4 using Auto Deployment Rule Factory
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Populating Rule Skeleton SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Populating Criterion Skeleton
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Populating Action Skeleton SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Populating Action Skeleton SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: Need to Process 1 rules SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: Processing Rule with ID:4, Name:Windows 7 Client Update Deployment Rule.
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Evaluating Update Criteria for AutoDeployment Rule 4
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Evaluating Update Criteria... SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Rule Criteria is: <UpdateXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Name="SMS_SoftwareUpdate" LocaleId="1033"><UpdateXMLDescriptionItems><UpdateXMLDescriptionItem
PropertyName="BulletinID" UIPropertyName=""><MatchRules><string>MS</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="DateRevised" UIPropertyName=""><MatchRules><string>1:0:0:0</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem
PropertyName="_Product" UIPropertyName=""><MatchRules><string>'Product:bfe5b177-a086-47a0-b102-097e4fa1f807'</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="IsSuperseded"
UIPropertyName=""><MatchRules><string>false</string></MatchRules></UpdateXMLDescriptionItem></UpdateXMLDescriptionItems></UpdateXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:BulletinID, PropertyValue:MS
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:DateRevised, PropertyValue:1:0:0:0
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:_Product, PropertyValue:'Product:bfe5b177-a086-47a0-b102-097e4fa1f807'
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:IsSuperseded, PropertyValue:false
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Query to run is: select CI_ID from dbo.fn_ListUpdateCIs(1033) ci~where IsExpired=0~ and (BulletinID like N'%MS%')~ and (DateRevised>=N'2013-11-19 11:29:20')~ and (IsSuperseded=0)~ and (CI_ID in (select CI_ID from v_CICategories_All
where CategoryInstance_UniqueID in (N'Product:bfe5b177-a086-47a0-b102-097e4fa1f807')))
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Rule resulted in a total of 0 updates
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Evaluation Resultant XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Enforcing Content Download Action SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Download Rule Action XML is: <ContentActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><PackageID>NC20000A</PackageID><ContentLocales><Locale>Locale:9</Locale><Locale>Locale:0</Locale></ContentLocales><ContentSources><Source
Name="Internet" Order="1"/><Source Name="WSUS" Order="2"/><Source Name="UNC" Order="3" Location=""/></ContentSources></ContentActionXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Criteria Filter Result XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
0 update(s) need to be downloaded in package "NC20000A" (\\SCCM2012R2\UpdateServicesPackages\Updates\Windows 7 Updates)
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
List of update(s) which match the content rule criteria = {}
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
No new update was added to the package. Package "NC20000A" would not be updated.
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Download action completed for the AutoDeployment
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Enforcing Create Deployment Action SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>NC20000C</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>7</Duration><DurationUnits>Days</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>false</AllowRestart><DisableMomAlert>true</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>false</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>false</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>HideAll</UserNotificationOption><LimitStateMessageVerbosity>true</LimitStateMessageVerbosity><StateMessageVerbosity>1</StateMessageVerbosity><AllowWUMU>false</AllowWUMU><AllowUseMeteredNetwork>false</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Windows 7 Client Update Deployment Rule</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>NC200001</ScopeID><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Windows 7 Client Update Deployment Rule</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>NC200001</ScopeID><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Parsing Rule XML... SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Could not find element DeploymentId SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Could not find element UpdateGroupId SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Could not find element UpdateGroupName SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
CRuleHandler: Rule 4 Successfully Applied! SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Updated Success Information for Rule: 4 SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: Deleting Rule 4 SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
I am a bit stumped with this so if anyone can help I would be grateful.
Thanks
Paul

Just seen wsyncmgr is busy syncing updates so actually I think I need more patience :-)
That's always a good idea when using ConfigMgr ...
Torsten Meringer | http://www.mssccmfaq.de

JMS Listner: Test Configuration Successful but not listening the messages

Hi,
I have configured the JMS Listner adapter in IDM 7.0 with Sun MQ 3.5.
My test configuration is susscessful. I have some messages on Sun MQ. I have one wotkflow associated with this adapter. I have mapped it via process rule of Edit Sync Policy. Now I want to read the messages from MQ and want to retrive in my workflow. But when I starts the scynchronization nothing comes to my workflow. The log is showing as
2007-08-16T19:05:38.354+0530: SARunner: initialized adapter
2007-08-16T19:05:38.404+0530: Initializing JMS Listener adapter.
2007-08-16T19:05:38.414+0530: Setting up JMS: local_transaction:true ackMode:1
2007-08-16T19:05:38.414+0530: Setting up JMS: user:admin password:<secret length=5/>
2007-08-16T19:05:38.414+0530: Setting up JMS: destinationType=QUEUE connFactoryName=MyQueueConnectionFactory destinationName=MyQueue messageSelector=null
2007-08-16T19:05:38.424+0530: Connection factory JNDI lookup returned an object of type com.sun.messaging.QueueConnectionFactory
2007-08-16T19:05:38.504+0530: JMS connection and consumer successfully created.
2007-08-16T19:05:38.514+0530: Connection JMS Info
PROVIDER NAME = Sun Java(tm) System Message Queue
PROVIDER VERSION = 3.5
PROVIDER MAJOR = 3
PROVIDER MINOR = 6
JMS VERSION = 1.1
JMS MAJOR = 1
JMS MINOR = 1
CLIENT_ID = null
2007-08-16T19:05:38.524+0530: Done initializing JMS Listener adapter.
2007-08-16T19:05:38.534+0530: SARunner: loop 0
2007-08-16T19:05:38.955+0530: Started, paused until Thu Aug 16 19:05:38 GMT+05:30 2007
2007-08-16T19:05:44.123+0530: Pause completed
2007-08-16T19:05:44.333+0530: Polling
2007-08-16T19:05:45.334+0530: Poll processed 0 messages.
2007-08-16T19:05:45.334+0530: Poll complete.
I am new with this adapter. Please anybody tell me what should I have to configure so that I would be able to read the messages from my JMS Listner Active Sync adapter?
Thanks in Advance

So, in order to get the message you have to map it. That is done be specifying the "Message Mapping", one of the Resource Parameters for JMS Listener. This can be done by specifying a rule that returns a <map> with the attribute. This would be, in my opinion, the preferred approach for text messages. For Map massages, the rule approach can't be used unless you use the jms java libraries, getString etc.
You can also implement the com.waveset.adapter.jms.JmsMessageMapper if java is your cup of tea, and put that in the message mapping text box. Password synch uses a java class to do the mapping.
To map the attribute called accId on the right side, you would use something like this:
<Rule name='JMS Message Mapper Rule'>
    <block>
        <map>
            <s>accId</s>
            <ref>message</ref>
        </map>
    </block>The Message Mapping text box would in this case look like this:
"rule:JMS Message Mapper Rule"
The <ref>message</ref> part contains the JMS text message. In this case the message consist of only one word. In a real-life situation, you would send a bunch of information, perhaps using split to separate the data.

PerformancePoint Services is not configured correctly but I'm Site administrator

Hi experts
I recenlty create a business intelligence site and set my active directory user as administrator.
I'm server and database administrator too.
but when I want to create a data source I get this error:
The Data source cannot be used because PerformancePoint Services is not configured correctly
I see some solution in then interent but some of them say that should set unattended user for performance point service.
I'm site administrator and Why I should set unattended user?
thanks
semi developer

You should set the Unattended Execution Account if you don't want to set credentials for data sources.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Services of 2nd instance disappearded from SQL Server 2012 Configuration Manager but still running

We recently configured multiple SQL Server 2012 R1 (two-node) clusters. Some with two instances. However, we discovered later that the Configuration Manager only lists the services of the 1st instance (the default MSSQLSERVER instance). The other named instance
is still running and can be failed over from one node to the other using Cluster Failover Manager but the services are not showing up in Configuration Manager in any of the two nodes.
Any thoughts as to why we see this odd behavior and how to fix it? We have done two instances before in SQL Server 2008 R2 but never saw this behavior.
Thanks,
Omer

Please see my answer above about the SQLCM version. We use the highest.
As I said before that this happens only when we have two instances running in a SQL2012 cluster. We configured 7 SQL 2012 clusters. three of them have two instances but only the services of one instance are displayed in CM. Services of the default instance
are listed in two of these clusters while services of the named instance are listed in the 3rd one.
One thing to note about these configurations is that the installer could not bring the services at the end of installation online because it did not have permission to create the computer objects in AD during setup thus we had to follow a known workaround
that involves having the domain admin fix these permissions and then we were able to add the SQL Agent Service to the cluster and bring the services online after modifying the ConfigurationState key value of each instance in the registry.
The installer account is setup as a local admin and we asked the domain admin to give it "Read All properties" and "create computer objects" in AD but for some reason it does not seem to have the ability to create these computer objects during installation
and the objects are to be pre-created and their permissions reset afterward.
I am giving this information and I am not sure if it has anything to do with the fact that SQLCM is listing the services of one instance and not the other.

Compliant user provisioning configuration done but can't create new request

Hi All,
We have upgraded our system from GRC 5.2 to GRC 5.3.
Then we have done all the configuration for Risk analysis (CC) and then we have completed the configuration for Compliant user provisioning(Access enforcer) but now when we are going to create the request it is saying the request canniot be created.
THe request passes through all the steps it is successful at Risk anlysis step also.
But at the last step when we go to submit the Request this error comes.
I have looked at the logs present in : Monitoring :--> System log. I could not find anything.
Am i looking at wrong place for logs. ?
Is there any issue with the configuration.. Because the requests was successfully created when in GRC 5.2.
Can anybody help me. ?

Rajesh-
Since 5.3 is in the ramp-up phase, you can contact SAP directly and they will resolve your problem very quickly, since they will be releasing it to all clients in October.
And I am assuming you are working with SAP directly right now, since you have upgraded to 5.3, right?...
Ankur
GRC Consultant

Need configure wifi, but adobe air cd won't install, why?

Am trying to configure wifi after installing new motorola wireless modem sbg901 and am trying to run the cd wifi instrux.
It asks to install Adobe Air, but it won't install. Why can't I install Adobe Air?

Thanks for that link. Got it downloaded.
It appears that something is wrong with my laptop... because the downloaded file stalls at the same point as the disc. While it still says "Installing Shared components". This is when the green progress bars stop(about 10% of the way) and the HDD activiity light on the laptop stops as well.
Back when I reinstalled windows, I had some issues updating. Once I got to a certain point, one of the updates would render my laptop screen completely blank.... so after reinstalling a few times, I stopped installing updates at a certain point... though I did make it to Service Pack 2.
That's the only reason I can think of, as to why the program won't install. It's really odd.
BTW: I did shut down the antivirus while attemptinng Premiere install.

I configured CIN but........

Similar Messages

Maybe you are looking for