I confirm that the Canoscan driver versions are indeed by Canon and not Adobe. Any Solution pl.?
I confirm that the Canoscan driver versions referred to, by me are indeed from Canon and not Adobe. Solution to
problem for images rotation during scanning itself is good and sincerely appreciated. Thanks for the same. My other problems remain. Any solutions please?
Please keep the discussion in your original topic http://forums.adobe.com/thread/1328718
Similar Messages
-
I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info? All computers are using Yosemite 10.10.1 and are new 13" MacBook Pros.
Hi wmcknigh,
Welcome to Apple Support Communities.
The article below should help you resolve the issue with shared content not appearing after setting up Family sharing on the MacBook Pros.
If you don't see your family's shared content - Apple Support
Cheers,
-Jason -
Most of the programs I have are registered to user and not to my name.
I'm having problem with the name of my Macbook when my name is used with certain programs (e.g. Mail, iTunes, iChat, etc.). It shows up as "User" instead of my name. I have gone to the system preferences and changed the account info to my name, but my programs still come up as "User." Has anyone else had this problem with their Macbooks?
I would very much like to get a solution to this crazy "feature". As you say, why on earth would I need to know that it was "I" who sent a message from "my" machine? I cannot find a way to change this.
Has anyone else got a solution, or can even say that their system also cannot display the receiver's name/address? Or is everyone satisfied with this?, and if so why?
Grrrr! -
Hi,
I have experienced a problem with my current version of the ODBC driver (version 10.1.0.2) and have been advised to upgrade to the newest version 10.2.0.2.0.
As the driver was only released a couple of months ago, I am a bit wary about upgrading. Has anybody out there had any issues with the reliability of this driver or does it seem to be pretty stable?
Thanks very much,
CarolineSorry, forgot to mention it is on linux.
Setting SetJavaHome in the jdev.conf did not help.
I did find a way to at least start the IDE though.
Either comment out SetJavaVM in the jdev.conf or start jdev with the -client option
Also to note:
I downloaded the jdk 1.4.2 32 bit for x86 and i can't get jdev to start:
current locale is not supported in X11, locale is set to CX locale modifiers are not supported, using defaultjava.lang.InternalError: Current locale is not supported
at sun.awt.motif.MWindowPeer.pSetTitle(Native Method)
at sun.awt.motif.MWindowPeer.init(MWindowPeer.java:97)
at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:58)
So right now i'll try to hack it with j2se 5... -
Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil LokaPlease try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response. -
How to confirm that the chains are de-schedule?
Hi Moderators & Experts,
Is there any way to view/find/identify that the chains have been stopped or de-scheduled??
like any Table or monitor screen with red or green signals.
For ex : i have 30 chains and due to outrage i have De-scheduled all the chains using the "Remove from schedule " option from scheduler menu,just to re-confirm is their any table or monitor to identify that the changes have been done correctly and no chain is left while performing the activity.
Any inputs appreciated.
Thanks
AamerHi Aamer,
in SM37 if you see any "BI_PROCESS_TRIGGER" scheduled then there are process chains that are still scheduled.
Good luck,
Vijay. -
Some users are experiencing difficulty opening certain docx files sent as email attachments. These files contain content controls to protect data in the document. Could someone please confirm that the content controls are the reason the files won't open.
These files open correctly when sent as doc files.
ThanksCongrats to Saeid, Ronen, and Ricardo! Big thank you to all our contributors!
Transact-SQL Technical Guru - February 2015
Saeid Hasani
T-SQL: How the Order of Elements in the ORDER BY Clause Implemented in the Output Result
Durval Ramos: "Very well structured and with examples that clarify how a T-SQL statement can change the data output order."
Richard Mueller: "Good use of Wiki guidelines and great examples."
Ronen Ariely
Free E-Books about SQL and Transact-SQL languages
Richard Mueller: "An excellent collection and a great idea."
Durval Ramos: "A good initiative. Very useful !!!"
Ricardo Lacerda
Declare Cursor (Transact-SQL) versus Window with Over - Running Totals
- Accumulated Earnings
Durval Ramos: "The "Window function" sample was well presented, but it was unclear how the chart was generated."
Richard Mueller: "A new idea that can be very useful. Grammar needs work"
Also worth a mention were the other entries this month:
[T-SQL] Retrieve Table List with Number of Rows by
Emiliano Musso
Richard Mueller: "Short but sweet solution to basic question."
Durval Ramos: "A simple T-SQL script, but useful."
[T-SQL] Search for Missing Values within a Numerical Sequence by
Emiliano Musso
Richard Mueller: "Clever solution with good code examples."
Durval Ramos: "You need add more details about development of the idea and create a "Conclusion" section to easy understanding."
[T-SQL] Converting Multiple Rows into HTML Format single ROW by
Maheen Khizar (Bint-e-Adam)
Durval Ramos: "In some situations, It's need to consume and format HTML tags for a UI, but It's important to remember that Best Practices recommend this formatting process preferably in Presentation Layer"
Richard Mueller: "A great new idea. Some features need more explanation. Avoid first person."
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?
If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo. I understand this was available in earlier versions. Any comments?
Against TOU which you "agreed" to in order to post in these user to user forums. If you want to "suggest" something to Apple, do so in the Product Feedback area.
-
I need to rebuld the "C" drive on my computer will need to reinstall adobe cs6 when I am done, but have moved recently and lost the data to get that done! Help!
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'. -
i recently found my ibook and decided to see if it would still turn on. it did but i got this flashing question mark, i did some research into this and found out that the hard drive is the cause. so i opened it up replaced the hard drive and closed it up, booted from the disc and crossed my fingers but it did not pick up the hard drive. i thought it might not have been installed properly, so i opened it up to check the connections to make shure they were secure and closed it back up but now it wont even boot from the disc. so dose anyone know whats wrong with it because i really don't just want throw it away if its a simple fix. please if anyone know i would greatly appreciate it.
<Re-Titled By Host>There often were more than one build of Apple computer per model number designation...
In the instance of iBook (white dualUSB) there appear to be two with number A-1007.
And both of these were 14-inch display models.
•iBook G3/800 14-Inch (32 VRAM - Tr) 800 MHz PowerPC 750fx (G3)
•iBook G3/900 14-Inch (Early 2003 - Op) 900 MHz PowerPC 750fx (G3)
•Apple iBook Specs (All iBook Technical Specs) for entire series - everymac:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
There are a few fairly good repair guides online, some on http://iFixit.com site.
Here's the link to the early iBook G3 series, includes color + white dualUSB.
If your iBook is a 14-inch G3 white dualUSB model that one is there, too:
•iBook G3 Repair guides - iFixit:
https://www.ifixit.com/Device/iBook_G3
Either of these may be able to run a system no later than OS X Tiger 10.4.11.
So a system install disc set could be used to troubleshoot, install, restore &
prepare a replacement hard drive for a new system.
Not certain what the issues are behind your situation, there may be more than
meets the eye. Some models of iBook were more prone to hardware problems
and as they age, fewer opportunities to affordably repair them exist.
Good luck in resolving the iBook G3 issues...! -
How can I find the JDBC Driver version
Hi,
How can I find the JDBC Driver version installed on my Sun Solaris machine which
has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
do so or does Weblogic console say something about it
Thanks
Parikshit KhannaParikshit Khanna wrote:
Hi,
How can I find the JDBC Driver version installed on my Sun Solaris machine which
has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
do so or does Weblogic console say something about it
Thanks
Parikshit KhannaThere is a jdbc DatabaseMetaData call getDriverVersion().
The best thing to do is to download Oracle's latest appropriate
driver from their site, and edit the start-weblogic script to
make sure the downloaded driver is ahead of any weblogic stuff in
the server's classpath. We do ship a driver, but Oracle usually
has a newer better one very soon after that...
Joe -
If you mean you are having trouble activating your iPhone after
updating to iOS 6:
iOS 6.0.1
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
My phone is from USA and unlocked version and I paid 750 USD.
Where did you acquire this iPhone?
USA
What wireless carrier did you use before this problem?
I used BSNL - India previously. After I get problem, I used Mobily -Saudi Arabia again I got problem and I am trying to use Airtel - India.
Does the app Cydia appear on your iPhone?
What does It mean?
What does it say when you look at Settings=>General=>About=>Carrier?
Airtel 13.0It would be better for troubleshhoting if you posted back to your original question.... here
-
Error applying transforms. Verify that the specified transform paths are valid.
In our enterprise environment, we recently used Group Policy to deploy a .msi package of Adobe Reader 9.3.1. In a few cases, the client was unable to successfully uninstall the older version of Adobe Reader and install version 9.3.1.
When an administrator attempts to manually install Adobe Reader 9.3.1 onto one of the client machines that experienced problems, they receive the following error message during the installation process:
"Error applying transforms. Verify that the specified transform paths are valid."
The Application Event Log will show that Adobe Reader 9.3 did not install:
Source: MsiInstaller
Event ID: 11708
Description: Adobe Reader 9.3. -- Installation failed
We have unsuccessfully attempted several suggested solutions...
http://kb2.adobe.com/cps/404/kb404307.html
This Adobe Knowledge Base is for Reader 8.x, but we decided to try anyway. When we run the kb404307.exe tool as an administrator, we get this error message:
"Acrobat Transforms Update did not find valid installed Acrobat products or you do not have sufficient privileges to update registry."
http://support.microsoft.com/kb/290301
We also saw advice to use the Windows Installer Cleanup utility (MSICUU2.exe) from Microsoft. This tool, however, has been discontinued and is no longer available.
Does anyone have any advice on how to install Adobe Reader 9.3.1 on a machine that is presenting the "Error applying transforms. Verify that the specified transform paths are valid." error during installation?In our enterprise environment, we recently used Group Policy to deploy a .msi package of Adobe Reader 9.3.1. In a few cases, the client was unable to successfully uninstall the older version of Adobe Reader and install version 9.3.1.
When an administrator attempts to manually install Adobe Reader 9.3.1 onto one of the client machines that experienced problems, they receive the following error message during the installation process:
"Error applying transforms. Verify that the specified transform paths are valid."
The Application Event Log will show that Adobe Reader 9.3 did not install:
Source: MsiInstaller
Event ID: 11708
Description: Adobe Reader 9.3. -- Installation failed
We have unsuccessfully attempted several suggested solutions...
http://kb2.adobe.com/cps/404/kb404307.html
This Adobe Knowledge Base is for Reader 8.x, but we decided to try anyway. When we run the kb404307.exe tool as an administrator, we get this error message:
"Acrobat Transforms Update did not find valid installed Acrobat products or you do not have sufficient privileges to update registry."
http://support.microsoft.com/kb/290301
We also saw advice to use the Windows Installer Cleanup utility (MSICUU2.exe) from Microsoft. This tool, however, has been discontinued and is no longer available.
Does anyone have any advice on how to install Adobe Reader 9.3.1 on a machine that is presenting the "Error applying transforms. Verify that the specified transform paths are valid." error during installation?
Maybe you are looking for
-
New switcher looking for a medium-powered graphics app
I'm new to the Mac and I'm looking for a reasonably easy to use graphics app. Bar this problem I'm so happy with the iMac I've had for just over a week I could cry. It's bloody wonderful (sorry, I'm English). I've used the GIMP before but to be hones
-
Dana Nourie web application tutorials
hi these are great tutorials and i've learned a lot from them - it brought so mcuh together in a clea dn easy to understand manner only problem after completing part 4 i can't compile my divelog.java file as its giving me the following error C:\divel
-
Is it bad RAM or a bad slot?
I have a dual G5 2.5GHz PowerMac. It came with two 256MB DIMMs installed in the two #1 slots (J11, J12). I bought two 1GB DIMMS and installed them in the two #2 slots (J13, J14). The brand and model of RAM I bought is Patriot PC3200 400MHz DDR DIMM's
-
No error if source directory and package doesn't match
Hello, I am using Sun's jdk1.5.0_09 "javac" compiler and the package name in my Test class is written as "com.hrishijoshi.asdf". This file compiles even if I put it in a directory called "com" (or anything else, as a matter of fact). javac doesn't th
-
Filling the gap with previous data and newdate...
input data GLOBAL_NAME PRODUCT_MODEL TRX_TYPE POS_DATE QUANTITY ABC MAW3147NC POS 3/17/2008 111 ABC MAW3147NC POS 4/14/2008 100 ABC MAW3147NC POS 5/26/2008